Paper detail

High-resolution measurement of sea ice mechanical characteristics using Distributed Acoustic Sensing

Sea ice mechanical properties are involved in dynamical processes acting from the scale of meters to several hundred kilometers. The current rapid changes in the state of polar sea ice require a better understanding and modeling of these processes and, therefore, accurate measurements of properties including sea ice thickness, density, Young's modulus and Poisson's ratio. These properties can be measured by tracking the propagation of elastic waves within the ice. Recent technological advances have enabled the use of fiber-optic cables as cost-effective, dense seismic arrays. Once connected to an interrogator unit and mechanically coupled to a medium, here the ice cover, these cables can monitor strain field propagation, using a technique called Distributed Acoustic Sensing (DAS). In this work, we describe the use of such an array of sensors in the coastal ice of the St. Lawrence Estuary, Canada, where a 600 m long optical fiber was deployed across three different morphological sea ice conditions. During hour-long recordings, we measured the propagation of both multi-modal seismic signals generated by active sources and hydro-elastic swell. We computed dispersion curves of active signals and used Continuous Wavelet Transform (CWT) to observe the evolution of swell characteristics in the different ice areas. The dispersion curves were successfully inverted to measure the spatial evolution of ice thickness, and Young's and flexural rigidity in each of these areas. We observed ice thicknesses from 25 cm to 68 cm and Young's modulus values between 4.5 GPa and 5.7 GPa, in good agreement with values derived from collocated geophone arrays and drill hole thickness measurements. DAS systems therefore appear to be effective in evaluating heterogeneous sea ice mechanical properties and thus sea ice formation history and dynamics.