Effect of wall slip on laminar flow past a circular cylinder

preprint2022arXivOpen access

Abstract

A numerical study of two-dimensional flow past a confined circular cylinder with slip wall is performed. A dimensionless number, Knudsen number (KnKn) is used to describe the slip length of cylinder wall. The Reynolds number (ReRe) and Knudsen number (KnKn) ranges considered are Re=[1,180]Re = [1, 180] and Kn=[0,∞)Kn = [0, \infty), respectively. Time-averaged flow separation angle (θsˉ\bar{θ_s}), dimensionless recirculation length (Lsˉ\bar{L_s}) and the tangential velocity (uτˉ\bar{u_τ}) distributed on the cylinder's wall, drag coefficient (Cdˉ\bar{C_d}) and drag reduction (DRDR) are investigated. The time-averaged tangential velocity distribution on the cylinder's wall fit well with the formula uτˉ=[α1+βe−γ(π−θ)+δ]sin(θ)\bar{u_τ} = [\fracα{1+βe^{-γ(π-θ)}}+δ]sin(θ) , where the coefficients (αα, ββ, γγ, δδ) are related with ReRe and KnKn. Several scaling-laws are found, log(uτmaxˉ)∼log(Re)log(\bar{u_{τmax}})\sim{log(Re)} and uτmaxˉ∼Kn\bar{u_{τmax}}\sim{Kn} for low KnKn, (uτmaxˉ\bar{u_{τmax}} is the maximum tangential velocity on the cylinder's wall), log(DR)∼log(Re)log(DR)\sim{log(Re)} (Re≤45Re\leq45 and Kn≤0.1Kn\leq0.1), log(DR)∼log(Kn)log(DR)\sim{log(Kn)} (Kn≤0.05Kn\leq0.05). At low ReRe, DRvDR_v (the friction drag reduction) is the main source of DRDR. However, DRpDR_p (the differential pressure drag reduction) contributes the most to DRDR at high ReRe (Re>∼60Re>\sim60) and KnKn over a critical number. DRvDR_v is found almost independent to ReRe.

Explore this paper’s authors, topics and related work.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Reviews 0

Write a reviewWrite

No reviews yet.

Discussion 0

Add a commentWrite

No comments yet.