Paper detail

An Active High Impedance Surface for Low Profile Tunable and Steerable Antennas

In this letter, an approach for designing a tunable and steerable antenna is presented. The antenna model is based on a wideband bow-tie radiating element mounted above an active Artificial Magnetic Conductor (AMC). The AMC geometry consists of a Frequency Selective Surface (FSS) printed on a thin grounded dielectric slab in which some chip-set varactor diodes are placed between the metallic elements and the backing plane through vias. The resulting antenna can be tuned over the S-Band by simply changing all varactor capacitances through an appropriate biasing voltage. Moreover, this structure can operate a beam scanning over each working frequency by applying an appropriate biasing voltage to the active elements of the AMC surface in accordance to leaky radiation principles. The low profile active antenna is characterized by an overall thickness of 5.32 mm, which corresponds to approximately lambda/24 at the centre of the operating band.