Source author record

Wayne S. Holland

Wayne S. Holland appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

7works
3topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

7 published item(s)

preprint2013arXiv

Cold Dust in Hot Regions

We mapped five massive star forming regions with the SCUBA-2 camera on the James Clerk Maxwell Telescope (JCMT). Temperature and column density maps are obtained from the SCUBA-2 450 and 850 $μ$m images. Most of the dense clumps we find have central temperatures below 20 K with some as cold as 8 K, suggesting that they have no internal heating due to the presence of embedded protostars. This is surprising, because at the high densities inferred from these images and at these low temperatures such clumps should be unstable, collapsing to form stars and generating internal heating. The column densities at the clump centres exceed 10$^{23}$ cm$^{-2}$, and the derived peak visual extinction values are from 25-500 mag for $β$ = 1.5-2.5, indicating highly opaque centres. The observed cloud gas masses range from $\sim$ 10 to 10$^{3}$ M$_{\odot}$. The outer regions of the clumps follow an $r^{-2.36\pm0.35}$ density distribution and this power-law structure is observed outside of typically 10$^{4}$ AU. All these findings suggest that these clumps are high-mass starless clumps and most likely contain high-mass starless cores.

preprint2013arXiv

SCUBA-2: iterative map-making with the Sub-Millimetre User Reduction Facility

The Submillimetre Common User Bolometer Array 2 (SCUBA-2) is an instrument operating on the 15-m James Clerk Maxwell Telescope, nominally consisting of 5120 bolometers in each of two simultaneous imaging bands centred over 450 and 850 um. The camera is operated by scanning across the sky and recording data at a rate of 200 Hz. As the largest of a new generation of multiplexed kilopixel bolometer cameras operating in the (sub)millimetre, SCUBA-2 data analysis represents a significant challenge. We describe the production of maps using the Sub-Millimetre User Reduction Facility (SMURF) in which we have adopted a fast, iterative approach to map-making that enables data reduction on single, modern, high-end desktop computers, with execution times that are typically shorter than the observing times. SMURF is used in an automated setting, both at the telescope for real-time feedback to observers, as well as for the production of science products for the JCMT Science Archive at the Canadian Astronomy Data Centre. Three detailed case studies are used to: (i) explore convergence properties of the map-maker using simple prior constraints (Uranus -- a point source); (ii) achieve the white-noise limit for faint point-source studies (extragalactic blank-field survey of the Lockman Hole); and (iii) demonstrate that our strategy is capable of recovering angular scales comparable to the size of the array footprint (approximately 5 arcmin) for bright extended sources (star-forming region M17).

preprint2013arXiv

SCUBA-2: on-sky calibration using submillimetre standard sources

SCUBA-2 is a 10000-bolometer submillimetre camera on the James Clerk Maxwell Telescope (JCMT). The instrument commissioning was completed in September 2011, and full science operations began in October 2011. To harness the full potential of this powerful new astronomical tool, the instrument calibration must be accurate and well understood. To this end, the algorithms for calculating the line-of-sight opacity have been improved, and the derived atmospheric extinction relationships at both wavebands of the SCUBA-2 instrument are presented. The results from over 500 primary and secondary calibrator observations have allowed accurate determination of the flux conversion factors (FCF) for the 850 and 450 micron arrays. Descriptions of the instrument beam-shape and photometry methods are presented. The calibration factors are well determined, with relative calibration accuracy better than 5 per cent at 850 microns and 10 per cent at 450 microns, reflecting the success of the derived opacity relations as well as the stability of the performance of the instrument over several months. The sample-size of the calibration observations and accurate FCFs have allowed the determination of the 850 and 450 micron fluxes of several well-known submillimetre sources, and these results are compared with previous measurements from SCUBA.

preprint2012arXiv

A new era of wide-field submillimetre imaging: on-sky performance of SCUBA-2

SCUBA-2 is the largest submillimetre wide-field bolometric camera ever built. This 43 square arc-minute field-of-view instrument operates at two wavelengths (850 and 450 microns) and has been installed on the James Clerk Maxwell Telescope on Mauna Kea, Hawaii. SCUBA-2 has been successfully commissioned and operational for general science since October 2011. This paper presents an overview of the on-sky performance of the instrument during and since commissioning in mid-2011. The on-sky noise characteristics and NEPs of the 450 and 850 micron arrays, with average yields of approximately 3400 bolometers at each wavelength, will be shown. The observing modes of the instrument and the on-sky calibration techniques are described. The culmination of these efforts has resulted in a scientifically powerful mapping camera with sensitivities that allow a square degree of sky to be mapped to 10 mJy/beam rms at 850 micron in 2 hours and 60 mJy/beam rms at 450 micron in 5 hours in the best weather.

preprint2010arXiv

Extinction correction and on-sky calibration of SCUBA-2

Commissioning of SCUBA-2 included a program of skydips and observations of calibration sources intended to be folded into regular observing as standard methods of source flux calibration and to monitor the atmospheric opacity and stability. During commissioning, it was found that these methods could also be utilised to characterise the fundamental instrument response to sky noise and astronomical signals. Novel techniques for analysing on-sky performance and atmospheric conditions are presented, along with results from the calibration observations and skydips.

preprint1998arXiv

Removing sky contributions from SCUBA data

The Submillimetre Common-User Bolometer Array (SCUBA) is a new continuum camera operating on the James Clerk Maxwell Telescope (JCMT) on Mauna Kea, Hawaii. It consists of two arrays of bolometric detectors; a 91 pixel 350/450 micron array and a 37 pixel 750/850 micron array. Both arrays can be used simultaneously and have a field-of-view of approximately 2.4 arcminutes in diameter on the sky. Ideally, performance should be limited solely by the photon noise from the sky background at all wavelengths of operation. However, observations at submillimetre wavelengths are hampered by ``sky-noise'' which is caused by spatial and temporal fluctuations in the emissivity of the atmosphere above the telescope. These variations occur in atmospheric cells that are larger than the array diameter, and so it is expected that the resultant noise will be correlated across the array and, possibly, at different wavelengths. In this paper we describe our initial investigations into the presence of sky-noise for all the SCUBA observing modes, and explain our current technique for removing it from the data.

preprint1998arXiv

SCUBA - A submillimetre camera operating on the James Clerk Maxwell Telescope

The Submillimetre Common-User Bolometer Array (SCUBA) is one of a new generation of cameras designed to operate in the submillimetre waveband. The instrument has a wide wavelength range covering all the atmospheric transmission windows between 300 and 2000 microns. In the heart of the instrument are two arrays of bolometers optimised for the short (350/450 microns) and long (750/850 microns) wavelength ends of the submillimetre spectrum. The two arrays can be used simultaneously, giving a unique dual-wavelength capability, and have a 2.3 arc-minute field of view on the sky. Background-limited performance is achieved by cooling the arrays to below 100 mK. SCUBA has now been in active service for over a year, and has already made substantial breakthroughs in many areas of astronomy. In this paper we present an overview of the performance of SCUBA during the commissioning phase on the James Clerk Maxwell Telescope (JCMT).