Source author record

W. Goldacker

W. Goldacker appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

cond-mat.supr-con

Catalog footprint

What is connected

5works

1topics

4close collaborators

Actions

Connect this record

Open graph Browse works

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2014arXiv

Influence of the voltage taps position on the self-field DC and AC transport characterization of HTS superconducting tapes

The current-voltage (I-V) curve is the basic characteristic of a superconducting wire or tape. Measuring I-V curves is generally problematic when samples have poor stabilization. Soldering voltage taps to an active part of the conductor affects the effectiveness of the local cooling and/or can be difficult to do in certain devices such as fault current limiters and cables where the tapes are closely packed. In order to overcome these problems, voltage taps can be placed outside the active area of the superconductor. We proved both by simulations and experiments that this arrangement leads to the same results as the standard four point method and it provides more detailed information for sample protection. The same arrangement can also be used for AC transport loss measurement. However in this case particular care has to be taken because the eddy current loss in the current leads contributes to the total measured loss. We used numerical simulations to evaluate the contribution of the eddy current loss to the measured AC loss. With help of simulations one can determine whether the contribution of the eddy current loss is significant and possibly optimize the current leads to reduce that loss contribution.

preprint2010arXiv

A second superconducting energy gap of Nb_3Sn observed by breakjunction point-contact spectroscopy

We report on investigations of the superconducting energy gap of the A15 superconductor Nb_3Sn by point-contact spectroscopy of breakjunctions. The voltage-dependent differential conductance dI/dV reveals features of a second energy gap besides the energy gap known from previous tunnel measurements with maxima at Δ_1=3.92 +/- 0.16 meV and Δ_2=0.85 +/- 0.17 meV as derived from a histogram summarizing the data of more than 60 contacts. These findings are the first spectroscopic evidence that Nb_3Sn belongs to the class of two-band superconductors and they are in line with low-temperature specific-heat measurements on Nb_3Sn.

preprint2010arXiv

Effects of high pressure on the physical properties of MgB2

The synthesis of MgB2-based materials under high pressure gave the possibility to suppress the evaporation of magnesium and to obtain near theoretically dense nanograined structures with high superconducting, thermal conducting, and mechanical characteristics: critical current densities of 1.8-1.0 \cdot 106 A/cm2 in the self field and 103 A/cm2 in a magnetic field of 8 T at 20 K, 5-3 \cdot 105 A/cm2 in self field at 30 K, the corresponding critical fields being HC2 = 15 T at 22 K and irreversible fields Hirr =13 T at 20 K, and Hirr =3.5 T at 30 K, thermal conduction of 53+/-2 W/(m \cdot κ), the Vickers hardness Hv=10.12+/-0.2 GPa under a load of 148.8 N and the fracture toughness K1C = 7.6+/-2.0 MPa m0.5 under the same load, the Young modulus E=213 GPa. Estimation of quenching current and AC losses allowed the conclusion that highpressure-prepared materials are promising for application in transformer-type fault current limiters working at 20-30 K.

preprint2005arXiv

High current DyBCO-ROEBEL Assembled Coated Conductor (RACC)

Low AC loss high transport current HTS cables (>1 kA) are required for application in transformers, generators and are considered for future generations of fusion reactors coils. 2G coated conductors are suitable candidates for high field application at quite high operation temperatures of 50-77 K, which is crucial precondition for economical cooling costs. As a feasibility study we present the first ROEBEL bar cable of approx. 35 cm length made from industrial DyBCO coated conductor (THEVA GmbH, Germany). Meander shaped ROEBEL strands of 4 mm width with a twist pitch of 180 mm were cut from 10 mm wide CC tapes using a specially designed tool. The strands carried in average 157 Amps/cm-width DC and were assembled to a subcable with 5 strands and a final cable with 16 strands. The 5 strand cable was tested and carried a transport current of > 300 Amps DC at 77 K, equivalent to the sum of the individual strand transport critical currents. The 16 strand cable carried 500 A limited through heating effects and non sufficient stabilisation and current sharing. A pulse current load indicated a current carrying potential of > 1 kA for the 16 strand cable.

preprint2001arXiv

Mechanically reinforced MgB2 wires and tapes with high transport currents

Monofilamentary MgB2-wires with a 2- or 3-component sheath containing mechanical reinforcing stainless steel (SS) were prepared and characterized. In direct contact to the superconductor Nb, Ta or Fe was used. For a selection of samples with a Fe and Fe/SS sheath, we investigated the transport critical current behaviour in magnetic fields changing systematically the geometrical shape from a round wire to a flat tape. A strong increase of the current densities in flat tapes was observed and possible reasons for this are discussed. Reinforcing the sheath in the outer layer with different amounts of stainless steel leads to a systematic field dependent decrease of the transport critical current density with increasing steel amount. This is an indication for a pre-stress induced degradation of the critical currents in MgB2 wires and first Ic-stress-strain experiments seem to confirm this observation and interpretation.