Source author record

V. Paramonov

V. Paramonov appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

physics.acc-ph

Catalog footprint

What is connected

2works

1topics

4close collaborators

Actions

Connect this record

Open graph Browse works

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2021arXiv

Design studies of a continuous-wave normal conducting buncher for European X-FEL

A three-cell 1.3 GHz, Normal Conducting (NC) buncher is designed for a possible future upgrade of the European XFEL to operate in a continuous-wave (CW) / long pulse (LP) mode. The RF geometry of the buncher is optimized for high shunt impedance, large mode separation as well as multipacting free in the operation range. The bunchersupport cavity voltage of 400 kV with an RF power dissipation of 14 kW. A tapered waveguide-based RF power coupler is designed to feed the RF power to the buncher. The RF power coupler port is optimized for field asymmetry compensation. The thermal load due to RF power dissipation is analyzed using Multiphysics simulations in CST and a simplified cooling scheme is designed.

preprint2013arXiv

Parameters of the Disk Loaded Waveguide structure for intermediate particles acceleration in the intermediate energy range

The Disk Loaded Waveguide (DLW) is the mostly used high frequency structure for acceleration of lightweight particles - electrons in the high energy range. In some physical experiments acceleration of more heavy particles - muons to medium energies is required. DLW parameters are considered for particle velocity 0.04 < β< 1 both for the fundamental and the nearest backward spatial harmonics. Physical and technical restrictions for DLW application in the low βrange and lower frequency (the L-band range) are analyzed. Basing on particularities of acceleration with Traveling Wave (TW) mode, deep optimization of DLW cells dimensions, the choice of optimal operating phase advance for DLW section and combination of forward and backward TW modes, it is possible to create simple, cost effective acceleration system for acceleration in the velocity range 0.2 < β< 1 for intermediate particles, in some parameters overcoming accelerating system with RF cavities in Standing Wave (SW) mode. Design criteria are discussed and examples of possible accelerating systems are presented.