Source author record

Stephan Schuschnigg

Explore this author’s publications, collaborators and research topics. This catalog record has not been claimed by its author.

ResearcherUnclaimed source record

Catalog footprint

Research overview

2works
2topics
4close collaborators

Published work

2 publications

preprint2022arXiv

In-situ alignment of anisotropic hard magnets of 3D printed magnets

Within this work, we demonstrate in-situ easy-axis alignment of single-crystal magnetic particles inside a polymer matrix using fused filament fabrication. Two different magnetic materials are investigated: (i) Strontium hexaferrite inside a PA6 matrix, fill grade: 49 vol% and (ii) Samarium iron nitride inside a PA12 matrix, fill grade: 44 vol%. In the presence of the external alignment field, the strontium hexaferrite particles inside the PA6 matrix can be well aligned with a ratio of remanent magnetization to saturation magnetization of 0.7. No significant alignment for samarium iron nitride could be achieved. The results show the feasibility to fabricate magnets with arbitrary and locally defined easy axis using fused filament fabrication since the permanent magnets used for the alignment (or alternatively an electromagnet) can be mounted on a rotatable platform.

preprint2019arXiv

Polymer-bonded anisotropic SrFe12_\text{12}O19_\text{19} filaments for fused filament fabrication

In this publication we describe the extrusion process and the properties of polymer-bonded anisotropic SrFe12_\text{12}O19_\text{19} filaments for fused filament fabrication (FFF). Highly filled polyamide 12 filaments with a filling fraction from 40 vol.% to 55 vol.% are mixed and extruded into filaments with a diameter of 1.75 mm. Such filaments are processable with a conventional FFF 3D printer. No modifications of the 3D printer are necessary. Detailed mechanical and magnetic investigations of printed samples are performed and discussed. In the presence of an external alignment field, the Sr ferrite particles inside the PA12 matrix can be aligned along an external magnetic field. The remanence can be increased by 40 % by printing anisotropic structures. For the 55 vol.% filled filament, a remanence of 212.8 mT and a coercivity of 307.4 mT are measured. The capabilities of printing magnetic anisotropic structures in a complex external field are presented with a Halbach-array arrangement. By the aim of an inverse field model, based on a finite element method, the orientation of the particles and the quality of the print can be estimated by a nondestructive method.

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.