Prediction of separation and transition on a low-pressure turbine blade using a RANS grid
Flow past a high-lift low-pressure turbine (LPT) blade in a cascade could be quite complex as phenomena like separation and transition are often involved. For a highly loadedT106A blade at a high incidence and relatively low Reynolds number(25, 000 < Re < 1, 00, 000), separation-induced transition is observed on the suction side of the blade, making it a challenging problem for model-based simulations. In this work, computations for this flow are carried out using RANS and hybrid LES/RANS approaches. The RANS simulations are performed with six popular low- Re turbulence models. While turbulence models by themselves fail to predict any separation on the T106A blade, the four-equation Langtry-Menter transition model predicts a short separation bubble. The characteristic of this bubble, however, is very different from what is observed in experiments and DNS, and therefore transition is not accurately predicted. An embedded hybrid LES/RANS approach, Limited numerical scales(LNS), with an automatic switch to LES in sufficiently resolved grids, is then used for predictions on the sameRANS grid. With the statistical turbulence on fine grids, LES-like behavior of LNS results in an unphysical drop in Reynolds stresses as the turbulent fluctuations are not appropriately represented on the resolved scale. Therefore, the LNS results are very similar to those obtained with turbulence models. However, when synthetic turbulence with correct statistical characteristics is used to stimulate the large eddies in the embedded LES zone, LNS is able to predict separation and recovers a solution very close to DNS and experimental results.