Researcher profile

Peter Kneisel

Peter Kneisel contributes to research discovery and scholarly infrastructure.

ResearcherAffiliation not importedOpen to collaborate

physics.acc-ph cond-mat.supr-con

Trust snapshot

Quick read

Trust 15 - Baseline

3works

0followers

2topics

3close collaborators

Actions

Decide how to stay connected

Follow researcher0

Inspect adjacent work, topics, institutions and collaborators without jumping out to a separate graph page.

Building this graph slice

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2014arXiv

Enhancement in Quality Factor of SRF Niobium Cavities by Material Diffusion

An increase in the quality factor of superconducting radiofrequency cavities is achieved by minimizing the surface resistance during processing steps. The surface resistance is the sum of temperature independent residual resistance and temperature/material dependent Bardeen-Cooper-Schrieffer (BCS) resistance. High temperature heat treatment usually reduces the impurities concentration from the bulk niobium, lowering the residual resistance. The BCS part can be reduced by selectively doping non-magnetic impurities. The increase in quality factor, termed as Q-rise, was observed in cavities when titanium or nitrogen thermally diffused in the inner cavity surface.

preprint2013arXiv

Analysis of post wet chemistry heat treatment effects on Nb SRF surface resistance

Most of the current research in superconducting radio frequency (SRF) cavities is focused on ways to reduce the construction and operating cost of SRF based accelerators as well as on the development of new or improved cavity processing techniques. The increase in quality factors is the result of the reduction of the surface resistance of the materials. A recent test on a 1.5 GHz single cell cavity made from ingot niobium of medium purity and heat treated at 1400 C in a ultra-high vacuum induction furnace resulted in a residual resistance of about 1nanoohm and a quality factor at 2.0 K increasing with field up to 5x10^10 at a peak magnetic field of 90 mT. In this contribution, we present some results on the investigation of the origin of the extended Q0-increase, obtained by multiple HF rinses, oxypolishing and heat treatment of all Nb cavities.

preprint2012arXiv

Superconducting DC and RF Properties of Ingot Niobium

The thermal conductivity, DC magnetization and penetration depth of large-grain niobium hollow cylindrical rods fabricated from ingots, manufactured by CBMM subjected to chemical and heat treatment were measured. The results confirm the influence of chemical and heat-treatment processes on the superconducting properties, with no significant dependence on the impurity concentrations in the original ingots. Furthermore, RF properties, such as the surface resistance and quench field of the niobium rods were measured using a TE011 cavity. The hollow niobium rod is the center conductor of this cavity, converting it to a coaxial cavity. The quench field is limited by the critical heat flux through the rods' cooling channel.