Source author record

N. H. Scott

Explore this author’s publications, collaborators and research topics. This catalog record has not been claimed by its author.

ResearcherUnclaimed source record

cond-mat.soft physics.class-ph math-ph math.MP cond-mat.mtrl-sci math.GM

Catalog footprint

Research overview

10works

6topics

2close collaborators

Actions

Is this your work?

Open graph Browse papers

preprint2020arXiv

${\bf U} = \mathbf{C}^{1/2}$ and its invariants in terms of $\bf C$ and its invariants

We consider $N\times N$ tensors for $N= 3,4,5,6$ . In the case $N=3$ , it is desired to find the three principal invariants $i_1, i_2, i_3$ of $\bf U$ in terms of the three principal invariants $I_1, I_2, I_3$ of ${\bf C}={\bf U}^2$ . Equations connecting the $i_α$ and $I_α$ are obtained by taking determinants of the factorisation $λ^2{\bf I}- {\bf C} = (λ{\bf I}- {\bf U}) (λ{\bf I}+ {\bf U})$ and comparing coefficients. On eliminating $i_2$ we obtain a quartic equation with coefficients depending solely on the $I_α$ whose largest root is $i_1$ . Similarly, we may obtain a quartic equation whose largest root is $i_2$ . For $N=4$ we find that $i_2$ is once again the largest root of a quartic equation and so all the $i_α$ are expressed in terms of the $I_α$ . Then $\bf U$ and ${\bf U}^{-1}$ are expressed solely in terms of $\bf C$ , as for $N=3$ . For $N= 5$ we find, but do not exhibit, a twentieth degree polynomial of which $i_1$ is the largest root and which has four spurious zeros. We are unable to express the $i_α$ in terms of the $I_α$ for $N=5$ . Nevertheless, $\bf U$ and ${\bf U}^{-1}$ are expressed in terms of powers of $\bf C$ with coefficients now depending on the $i_α$ . For $N=6$ we find, but do not exhibit, a 32 degree polynomial which has largest root $i_1^2$ . Sixteen of these roots are relevant but the other 16, which we exhibit, are spurious. $\bf U$ and ${\bf U}^{-1}$ are expressed in terms of powers of $\bf C$ . The cases $N>6$ are discussed. Keywords: Continuum mechanics, polar decomposition, tensor square roots, principal invariants, cubic equations, quartic equations, equations of degree 16

preprint2020arXiv

A comparison of limited-stretch models of rubber elasticity

In this paper we describe various limited-stretch models of nonlinear rubber elasticity, each dependent on only the first invariant of the left Cauchy-Green strain tensor and having only two independent material constants. The models are described as limited-stretch, or restricted elastic, because the strain energy and stress response become infinite at a finite value of the first invariant. These models describe well the limited stretch of the polymer chains of which rubber is composed. We discuss Gent's model which is the simplest limited-stretch model and agrees well with experiment. Various statistical models are then described: the one-chain, three-chain, four-chain and Arruda-Boyce eight-chain models, all of which involve the inverse Langevin function. A numerical comparison between the three-chain and eight-chain models is provided. Next, we compare various models which involve approximations to the inverse Langevin function with the exact inverse Langevin function of the eight-chain model. A new approximate model is proposed that is as simple as Cohen's original model but significantly more accurate. We show that effectively the eight-chain model may be regarded as a linear combination of the neo-Hookean and Gent models. Treloar's model is shown to have about half the percentage error of our new model but it is much more complicated. For completeness a modified Treloar model is introduced but this is only slightly more accurate than Treloar's original model. For the deformations of uniaxial tension, biaxial tension, pure shear and simple shear we compare the accuracy of these models, and that of Puso, with the eight-chain model by means of graphs and a table. Our approximations compare extremely well with models frequently used and described in the literature, having the smallest mean percentage error over most of the range of the argument.

preprint2020arXiv

A cyclic stress softening model for the Mullins effect

In this paper the inelastic features of stress relaxation, hysteresis and residual strain are combined with the Arruda-Boyce eight-chain model of elasticity, in order to develop a model that is capable of describing the Mullins effect for cyclic stress-softening of an incompressible hyperelastic material, in particular a carbon-filled rubber vulcanizate. We have been unable to identify in the literature any other model that takes into consideration all the above inelastic features of the cyclic stress-softening of carbon-filled rubber. Our model compares favourably with experimental data and gives a good description of stress-softening, hysteresis, stress relaxation, residual strain and creep of residual strain. Keywords: Mullins effect, stress-softening, hysteresis, stress relaxation, residual strain, creep of residual strain. MSC codes: 74B20, 74D10, 74L1

preprint2020arXiv

Energy flux and dissipation of inhomogeneous plane waves in hereditary viscoelasticity

Inhomogeneous small-amplitude plane waves of (complex) frequency $ω$ are propagated through a linear dissipative material which displays hereditary viscoelasticity. The energy density, energy flux and dissipation are quadratic in the small quantities, namely, the displacement gradient, velocity and velocity gradient, each harmonic with frequency $ω$ , and so give rise to attenuated constant terms as well as to inhomogeneous plane waves of frequency $2ω$ . The quadratic terms are usually removed by time averaging but we retain them here as they are of comparable magnitude with the time-averaged quantities of frequency $ω$ . A new relationship is derived in hereditary viscoelasticity that connects the amplitudes of the terms of the energy density, energy flux and dissipation that have frequency $2ω$ . It is shown that the complex group velocity is related to the amplitudes of the terms with frequency $2ω$ rather than to the attenuated constant terms as it is for homogeneous waves in conservative materials.

preprint2020arXiv

On bivectors and jay-vectors

A combination $\mathbf{a}+\mathrm{i}\mathbf{b}$ where ${\mathrm i}^2=-1$ and $\mathbf{a}, \, \mathbf{b}$ are real vectors is called a bivector. Gibbs developed a theory of bivectors, in which he associated an ellipse with each bivector. He obtained results relating pairs of conjugate semi-diameters and in particular considered the implications of the scalar product of two bivectors being zero. This paper is an attempt to develop a similar formulation for hyperbolas by the use of jay-vectors - a jay-vector is a linear combination $\mathbf{a}+\mathrm{j}\mathbf{b}$ of real vectors $\mathbf{a}$ and $\mathbf{b}$ , where ${\mathrm j}^2=+1$ but ${\mathrm j}$ is not a real number, so ${\mathrm j}\neq\pm1$ . The implications of the vanishing of the scalar product of two jay-vectors is also considered. We show how to generate a triple of conjugate semi-diameters of an ellipsoid from any orthonormal triad. We also see how to generate in a similar manner a triple of conjugate semi-diameters of a hyperboloid and its conjugate hyperboloid. The role of complex rotations (complex orthogonal matrices) is discussed briefly. Application is made to second order elliptic and hyperbolic partial differential equations. Keywords: Split complex numbers, Hyperbolic numbers, Coquaternions, Conjugate semi-diameters, Hyperboloids and ellipsoids, Complex rotations, PDEs MSC (2010) 35J05, 35L10, 74J05

preprint2020arXiv

On the complex singularities of the inverse Langevin function

We study the inverse Langevin function $\mathscr{L}^{-1}(x)$ because of its importance in modelling limited-stretch elasticity where the stress and strain energy become infinite as a certain maximum strain is approached, modelled here by $x\to1$ . The only real singularities of the inverse Langevin function $\mathscr{L}^{-1}(x)$ are two simple poles at $x=\pm1$ and we see how to remove their effects either multiplicatively or additively. In addition, we find that $\mathscr{L}^{-1}(x)$ has an infinity of complex singularities. Examination of the Taylor series about the origin of $\mathscr{L}^{-1}(x)$ shows that the four complex singularities nearest the origin are equidistant from the origin and have the same strength; we develop a new algorithm for finding these four complex singularities. Graphical illustration seems to point to these complex singularities being of a square root nature. An exact analysis then proves these are square root branch points.

preprint2020arXiv

Orthotropic cyclic stress-softening model for pure shear during repeated loading and unloading

We derive an orthotropic model to describe the cyclic stress-softening of a carbon-filled rubber vulcanizate through multiple stress-strain cycles with increasing values of the maximum strain. We specialize the deformation to pure shear loading. As a result of strain-induced anisotropy following on from initial primary loading, the material may subsequently be described as orthotropic because in pure shear there are three different principal stretches so that the strain-induced anisotropy of the stress response is different in each of these three directions. We derive non-linear orthotropic models for the elastic response, stress relaxation and residual strain in order to model accurately the inelastic features associated with cyclic stress softening. We then develop an orthotropic version of the Arruda-Boyce eight-chain model of elasticity and then combine it with the ideas previously developed in this paper to produce an orthotropic constitutive relation for the cyclic stress-softening of a carbon-filled rubber vulcanizate. The model developed here includes the widely-occurring effects of hysteresis, stress-relaxation and residual strain. The model is found to compare well with experimental data. } {Mullins effect, stress-relaxation, hysteresis, residual strain, orthotropy.}

preprint2020arXiv

The incremental bulk modulus, Young's modulus and Poisson's ratio in nonlinear isotropic elasticity: physically reasonable response

An incremental (or tangent) bulk modulus for finite isotropic elasticity is defined which compares an increment in hydrostatic pressure with the corresponding increment in relative volume. Its positivity provides a stringent criterion for physically reasonable response involving the second derivatives of the strain energy function. Also, an average (or secant) bulk modulus is defined by comparing the current stress with the relative volume change. The positivity of this bulk modulus provides a physically reasonable response criterion less stringent than the former. The concept of incremental bulk modulus is extended to anisotropic elasticity. For states of uniaxial tension an incremental Poisson's ratio and an incremental Young's modulus are similarly defined for nonlinear isotropic elasticity and have properties similar to those of the incremental bulk modulus. The incremental Poisson's ratios for the isotropic constraints of incompressibility, Bell, Ericksen, and constant area are considered. The incremental moduli are all evaluated for a specific example of the compressible neo-Hookean solid. Bounds on the ground state Lamé elastic moduli, assumed positive, are given which are sufficient to guarantee the positivity of the incremental bulk and Young's moduli for all strains. However, although the ground state Poisson's ratio is positive we find that the incremental Poisson's ratio becomes negative for large enough axial extensions.

preprint2020arXiv

Thermoelasticity and Generalized Thermoelasticity Viewed as Wave Hierarchies

It is seen how to write the standardÊ form of the four partial differential equations in four unknowns of anisotropic thermoelasticity as a single equation in one variable, in terms of isothermal and isentropic wave operators. This equation, of diffusive type, is of the eighth order in the space derivatives and seventh order in the time derivatives and so is parabolic in character. After having seen how to cast the 1D diffusion equation into Whitham's wave hierarchy form it is seen how to recast the full equation, for uni-directional motion, in wave hierarchy form. The higher order waves are isothermal and the lower order waves are isentropic or purely diffusive. The wave hierarchy form is then used to derive the main features of the solution of the initial value problem, thereby bypassing the need for an asymptotic analysis of the integral form of the exact solution. The results are specialized to the isotropic case. The theory of generalized thermoelasticity associates a relaxation time with the heat flux vector and the resulting system of equations is hyperbolic in character. It is seen also how to write this system in wave hierarchy form which is again used to derive the main features of the solution of the initial value problem. Simpler results are obtained in the isotropic case.

preprint2020arXiv

Transversely isotropic cyclic stress-softening model for the Mullins effect

This paper models stress softening during cyclic loading and unloading of an elastomer. The paper begins by remodelling the primary loading curve to include a softening function and goes on to derive non-linear transversely isotropic constitutive equations for the elastic response, stress relaxation, residual strain and creep of residual strain. These ideas are combined with a transversely isotropic version of the Arruda-Boyce eight-chain model to develop a constitutive relation that is capable of accurately representing the Mullins effect during cyclic stress-softening for a transversely isotropic, hyperelastic material, in particular a carbon-filled rubber vulcanizate. Keywords: Mullins effect, stress-softening, hysteresis, stress relaxation, residual strain, creep of residual strain, transverse isotropy. MSC codes: 74B20, 74D10, 74L15

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

N. H. Scott

Research overview

Is this your work?

10 publications

${\bf U} = \mathbf{C}^{1/2}$ and its invariants in terms of $\bf C$ and its invariants

A comparison of limited-stretch models of rubber elasticity

A cyclic stress softening model for the Mullins effect

Energy flux and dissipation of inhomogeneous plane waves in hereditary viscoelasticity

On bivectors and jay-vectors

On the complex singularities of the inverse Langevin function

Orthotropic cyclic stress-softening model for pure shear during repeated loading and unloading

The incremental bulk modulus, Young's modulus and Poisson's ratio in nonlinear isotropic elasticity: physically reasonable response

Thermoelasticity and Generalized Thermoelasticity Viewed as Wave Hierarchies

Transversely isotropic cyclic stress-softening model for the Mullins effect

See the researcher in context

Building this map preview

N. H. Scott

Research overview

Is this your work?

10 publications

U=C1/2{\bf U} = \mathbf{C}^{1/2}U=C1/2 and its invariants in terms of C\bf CC and its invariants

A comparison of limited-stretch models of rubber elasticity

A cyclic stress softening model for the Mullins effect

Energy flux and dissipation of inhomogeneous plane waves in hereditary viscoelasticity

On bivectors and jay-vectors

On the complex singularities of the inverse Langevin function

Orthotropic cyclic stress-softening model for pure shear during repeated loading and unloading

The incremental bulk modulus, Young's modulus and Poisson's ratio in nonlinear isotropic elasticity: physically reasonable response

Thermoelasticity and Generalized Thermoelasticity Viewed as Wave Hierarchies

Transversely isotropic cyclic stress-softening model for the Mullins effect

See the researcher in context

Building this map preview

${\bf U} = \mathbf{C}^{1/2}$ and its invariants in terms of $\bf C$ and its invariants