Source author record

Matthias Korb

Matthias Korb appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

eess.SP Networking and Internet Architecture

Catalog footprint

What is connected

2works

2topics

4close collaborators

Actions

Connect this record

Open graph Browse works

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2022arXiv

EC-GSM-IoT Network Synchronization with Support for Large Frequency Offsets

EDGE-based EC-GSM-IoT is a promising candidate for the billion-device cellular IoT (cIoT), providing similar coverage and battery life as NB-IoT. The goal of 20 dB coverage extension compared to EDGE poses significant challenges for the initial network synchronization, which has to be performed well below the thermal noise floor, down to an SNR of -8.5 dB. We present a low-complexity synchronization algorithm supporting up to 50 kHz initial frequency offset, thus enabling the use of a low-cost +/-25 ppm oscillator. The proposed algorithm does not only fulfill the 3GPP requirements, but surpasses them by 3 dB, enabling communication with an SNR of -11.5 dB or a maximum coupling loss of up to 170.5 dB.

preprint2016arXiv

Maximum-Likelihood Detection for Energy-Efficient Timing Acquisition in NB-IoT

Initial timing acquisition in narrow-band IoT (NB-IoT) devices is done by detecting a periodically transmitted known sequence. The detection has to be done at lowest possible latency, because the RF-transceiver, which dominates downlink power consumption of an NB-IoT modem, has to be turned on throughout this time. Auto-correlation detectors show low computational complexity from a signal processing point of view at the price of a higher detection latency. In contrast a maximum likelihood cross-correlation detector achieves low latency at a higher complexity as shown in this paper. We present a hardware implementation of the maximum likelihood cross-correlation detection. The detector achieves an average detection latency which is a factor of two below that of an auto-correlation method and is able to reduce the required energy per timing acquisition by up to 34%.