Source author record

M. J. P. F. G. Monteiro

M. J. P. F. G. Monteiro appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

42works
6topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

42 published item(s)

preprint2020arXiv

ESPRESSO@VLT -- On-sky performance and first results

ESPRESSO is the new high-resolution spectrograph of ESO's Very-Large Telescope (VLT). It was designed for ultra-high radial-velocity precision and extreme spectral fidelity with the aim of performing exoplanet research and fundamental astrophysical experiments with unprecedented precision and accuracy. It is able to observe with any of the four Unit Telescopes (UT) of the VLT at a spectral resolving power of 140,000 or 190,000 over the 378.2 to 788.7 nm wavelength range, or with all UTs together, turning the VLT into a 16-m diameter equivalent telescope in terms of collecting area, while still providing a resolving power of 70,000. We provide a general description of the ESPRESSO instrument, report on the actual on-sky performance, and present our Guaranteed-Time Observation (GTO) program with its first results. ESPRESSO was installed on the Paranal Observatory in fall 2017. Commissioning (on-sky testing) was conducted between December 2017 and September 2018. The instrument saw its official start of operations on October 1st, 2018, but improvements to the instrument and re-commissioning runs were conducted until July 2019. The measured overall optical throughput of ESPRESSO at 550 nm and a seeing of 0.65 arcsec exceeds the 10% mark under nominal astro-climatic conditions. We demonstrate a radial-velocity precision of better than 25 cm/s during one night and 50 cm/s over several months. These values being limited by photon noise and stellar jitter show that the performanceis compatible with an instrumental precision of 10 cm/s. No difference has been measured across the UTs neither in throughput nor RV precision. The combination of the large collecting telescope area with the efficiency and the exquisite spectral fidelity of ESPRESSO opens a new parameter space in RV measurements, the study of planetary atmospheres, fundamental constants, stellar characterisation and many other fields.

preprint2020arXiv

Revisiting Proxima with ESPRESSO

We aim to confirm the presence of Proxima b using independent measurements obtained with the new ESPRESSO spectrograph, and refine the planetary parameters taking advantage of its improved precision. We analysed 63 spectroscopic ESPRESSO observations of Proxima taken during 2019. We obtained radial velocity measurements with a typical radial velocity photon noise of 26 cm/s. We ran a joint MCMC analysis on the time series of the radial velocity and full-width half maximum of the cross-correlation function to model the planetary and stellar signals present in the data, applying Gaussian process regression to deal with stellar activity. We confirm the presence of Proxima b independently in the ESPRESSO data. The ESPRESSO data on its own shows Proxima b at a period of 11.218 $\pm$ 0.029 days, with a minimum mass of 1.29 $\pm$ 0.13 Me. In the combined dataset we measure a period of 11.18427 $\pm$ 0.00070 days with a minimum mass of 1.173 $\pm$ 0.086 Me. We find no evidence of stellar activity as a potential cause for the 11.2 days signal. We find some evidence for the presence of a second short-period signal, at 5.15 days with a semi-amplitude of merely 40 cm/s. If caused by a planetary companion, it would correspond to a minimum mass of 0.29 $\pm$ 0.08 Me. We find that the FWHM of the CCF can be used as a proxy for the brightness changes and that its gradient with time can be used to successfully detrend the radial velocity data from part of the influence of stellar activity. The activity-induced radial velocity signal in the ESPRESSO data shows a trend in amplitude towards redder wavelengths. Velocities measured using the red end of the spectrograph are less affected by activity, suggesting that the stellar activity is spot-dominated. The data collected excludes the presence of extra companions with masses above 0.6 Me at periods shorter than 50 days.

preprint2016arXiv

EELT-HIRES the high-resolution spectrograph for the E-ELT

The first generation of E-ELT instruments will include an optical-infrared High Resolution Spectrograph, conventionally indicated as EELT-HIRES, which will be capable of providing unique breakthroughs in the fields of exoplanets, star and planet formation, physics and evolution of stars and galaxies, cosmology and fundamental physics. A 2-year long phase A study for EELT-HIRES has just started and will be performed by a consortium composed of institutes and organisations from Brazil, Chile, Denmark, France, Germany, Italy, Poland, Portugal, Spain, Sweden, Switzerland and United Kingdom. In this paper we describe the science goals and the preliminary technical concept for EELT-HIRES which will be developed during the phase A, as well as its planned development and consortium organisation during the study.

preprint2016arXiv

New Teff and [Fe/H] spectroscopic calibration for FGK dwarfs and GK giants

The ever-growing number of large spectroscopic survey programs has increased the importance of fast and reliable methods with which to determine precise stellar parameters. Some of these methods are highly dependent on correct spectroscopic calibrations. The goal of this work is to obtain a new spectroscopic calibration for a fast estimate of Teff and [Fe/H] for a wide range of stellar spectral types. We used spectra from a joint sample of 708 stars, compiled from 451 FGK dwarfs and 257 GK-giant stars. We used homogeneously determined spectroscopic stellar parameters to derive temperature calibrations using a set of selected EW line-ratios, and [Fe/H] calibrations using a set of selected FeI lines. We have derived 322 EW line-ratios and 100 FeI lines that can be used to compute Teff and [Fe/H], respectively. We show that these calibrations are effective for FGK dwarfs and GK-giant stars in the following ranges: 4500 K < Teff < 6500 K , 2.5 < logg < 4.9 dex, and -0.8 < [Fe/H] < 0.5 dex. The new calibration has a standard deviation of 74 K for Teff and 0.07 dex for [Fe/H]. We use four independent samples of stars to test and verify the new calibration, a sample of 56 giant stars, a sample composed of Gaia FGK benchmark stars, a sample of 36 GK-giant stars of the DR1 of the Gaia-ESO survey, and a sample of 582 FGK-dwarf stars. We also provide a new computer code, GeTCal, for automatically producing new calibration files based on any new sample of stars.

preprint2016arXiv

The SpaceInn-SISMA database: characterization of a large sample of variable and active stars by means of HARPS spectra

We created a large database of physical parameters and variability indicators by fully reducing and analysing the large number of spectra taken to complement the asteroseismic observations of the CoRoT satellite. 7103 spectra of 261 stars obtained with the ESO echelle spectrograph HARPS have been stored in the VO-compliant database Spectroscopic Indicators in a SeisMic Archive (SISMA), along with the CoRoT photometric data of the 72 CoRoT asteroseismic targets. The remaining stars belong to the same variable classes of the CoRoT targets and were observed to better characterize the properties of such classes. Several useful variability indicators (mean line profiles; indices of differential rotation, activity and emission lines) together with vsini and radial velocity measurements have been extracted from the spectra. The atmospheric parameters Teff, logg and [Fe/H] have been computed following a homogeneous procedure. As a result, we fully characterize a sample of new and known variable stars by computing several spectroscopic indicators, also providing some cases of simultaneous photometry and spectroscopy.

preprint2014arXiv

Properties of 42 Solar-type Kepler Targets from the Asteroseismic Modeling Portal

Recently the number of main-sequence and subgiant stars exhibiting solar-like oscillations that are resolved into individual mode frequencies has increased dramatically. While only a few such data sets were available for detailed modeling just a decade ago, the Kepler mission has produced suitable observations for hundreds of new targets. This rapid expansion in observational capacity has been accompanied by a shift in analysis and modeling strategies to yield uniform sets of derived stellar properties more quickly and easily. We use previously published asteroseismic and spectroscopic data sets to provide a uniform analysis of 42 solar-type Kepler targets from the Asteroseismic Modeling Portal (AMP). We find that fitting the individual frequencies typically doubles the precision of the asteroseismic radius, mass and age compared to grid-based modeling of the global oscillation properties, and improves the precision of the radius and mass by about a factor of three over empirical scaling relations. We demonstrate the utility of the derived properties with several applications.

preprint2014arXiv

The PLATO 2.0 Mission

PLATO 2.0 has recently been selected for ESA's M3 launch opportunity (2022/24). Providing accurate key planet parameters (radius, mass, density and age) in statistical numbers, it addresses fundamental questions such as: How do planetary systems form and evolve? Are there other systems with planets like ours, including potentially habitable planets? The PLATO 2.0 instrument consists of 34 small aperture telescopes (32 with 25 sec readout cadence and 2 with 2.5 sec candence) providing a wide field-of-view (2232 deg2) and a large photometric magnitude range (4-16 mag). It focusses on bright (4-11 mag) stars in wide fields to detect and characterize planets down to Earth-size by photometric transits, whose masses can then be determined by ground-based radial-velocity follow-up measurements. Asteroseismology will be performed for these bright stars to obtain highly accurate stellar parameters, including masses and ages. The combination of bright targets and asteroseismology results in high accuracy for the bulk planet parameters: 2%, 4-10% and 10% for planet radii, masses and ages, respectively. The planned baseline observing strategy includes two long pointings (2-3 years) to detect and bulk characterize planets reaching into the habitable zone (HZ) of solar-like stars and an additional step-and-stare phase to cover in total about 50% of the sky. PLATO 2.0 will observe up to 1,000,000 stars and detect and characterize hundreds of small planets, and thousands of planets in the Neptune to gas giant regime out to the HZ. It will therefore provide the first large-scale catalogue of bulk characterized planets with accurate radii, masses, mean densities and ages. This catalogue will include terrestrial planets at intermediate orbital distances, where surface temperatures are moderate. Coverage of this parameter range with statistical numbers of bulk characterized planets is unique to PLATO 2.0.

preprint2013arXiv

A large sample of calibration stars for Gaia: log g from Kepler and CoRoT

Asteroseismic data can be used to determine surface gravities with precisions of < 0.05 dex by using the global seismic quantities Deltanu and nu_max along with Teff and [Fe/H]. Surface gravity is also one of the four stellar properties to be derived by automatic analyses for 1 billion stars from Gaia data (workpackage GSP_Phot). We explore seismic data from MS F, G, K stars (solar-like stars) observed by Kepler as a potential calibration source for methods that Gaia will use for object characterisation (log g). We calculate log g for bright nearby stars for which radii and masses are known, and using their global seismic quantities in a grid-based method, we determine an asteroseismic log g to within 0.01 dex of the direct calculation, thus validating the accuracy of our method. We find that errors in Teff and mainly [Fe/H] can cause systematic errors of 0.02 dex. We then apply our method to a list of 40 stars to deliver precise values of surface gravity, i.e. sigma < 0.02 dex, and we find agreement with recent literature values. Finally, we explore the precision we expect in a sample of 400+ Kepler stars which have their global seismic quantities measured. We find a mean uncertainty (precision) on the order of <0.02 dex in log g over the full explored range 3.8 < log g < 4.6, with the mean value varying only with stellar magnitude (0.01 - 0.02 dex). We study sources of systematic errors in log g and find possible biases on the order of 0.04 dex, independent of log g and magnitude, which accounts for errors in the Teff and [Fe/H] measurements, as well as from using a different grid-based method. We conclude that Kepler stars provide a wealth of reliable information that can help to calibrate methods that Gaia will use, in particular, for source characterisation with GSP_Phot where excellent precision (small uncertainties) and accuracy in log g is obtained from seismic data.

preprint2013arXiv

Asteroseismic fundamental properties of solar-type stars observed by the NASA Kepler Mission

We use asteroseismic data obtained by the NASA Kepler Mission to estimate the fundamental properties of more than 500 main-sequence and sub-giant stars. Data obtained during the first 10 months of Kepler science operations were used for this work, when these solar-type targets were observed for one month each in a survey mode. Stellar properties have been estimated using two global asteroseismic parameters and complementary photometric and spectroscopic data. Homogeneous sets of effective temperatures were available for the entire ensemble from complementary photometry; spectroscopic estimates of T_eff and [Fe/H] were available from a homogeneous analysis of ground-based data on a subset of 87 stars. [Abbreviated version... see paper for full abstract.]

preprint2013arXiv

Kepler White Paper: Asteroseismology of Solar-Like Oscillators in a 2-Wheel Mission

We comment on the potential for continuing asteroseismology of solar-type and red-giant stars in a 2-wheel Kepler Mission. Our main conclusion is that by targeting stars in the ecliptic it should be possible to perform high-quality asteroseismology, as long as favorable scenarios for 2-wheel pointing performance are met. Targeting the ecliptic would potentially facilitate unique science that was not possible in the nominal Mission, notably from the study of clusters that are significantly brighter than those in the Kepler field. Our conclusions are based on predictions of 2-wheel observations made by a space photometry simulator, with information provided by the Kepler Project used as input to describe the degraded pointing scenarios. We find that elevated levels of frequency-dependent noise, consistent with the above scenarios, would have a significant negative impact on our ability to continue asteroseismic studies of solar-like oscillators in the Kepler field. However, the situation may be much more optimistic for observations in the ecliptic, provided that pointing resets of the spacecraft during regular desaturations of the two functioning reaction wheels are accurate at the < 1 arcsec level. This would make it possible to apply a post-hoc analysis that would recover most of the lost photometric precision. Without this post-hoc correction---and the accurate re-pointing it requires---the performance would probably be as poor as in the Kepler-field case. Critical to our conclusions for both fields is the assumed level of pointing noise (in the short-term jitter and the longer-term drift). We suggest that further tests will be needed to clarify our results once more detail and data on the expected pointing performance becomes available, and we offer our assistance in this work.

preprint2013arXiv

Measurement of acoustic glitches in solar-type stars from oscillation frequencies observed by Kepler

For the very best and brightest asteroseismic solar-type targets observed by Kepler, the frequency precision is sufficient to determine the acoustic depths of the surface convective layer and the helium ionization zone. Such sharp features inside the acoustic cavity of the star, which we call acoustic glitches, create small oscillatory deviations from the uniform spacing of frequencies in a sequence of oscillation modes with the same spherical harmonic degree. We use these oscillatory signals to determine the acoustic locations of such features in 19 solar-type stars observed by the Kepler mission. Four independent groups of researchers utilized the oscillation frequencies themselves, the second differences of the frequencies and the ratio of the small and large separation to locate the base of the convection zone and the second helium ionization zone. Despite the significantly different methods of analysis, good agreement was found between the results of these four groups, barring a few cases. These results also agree reasonably well with the locations of these layers in representative models of the stars. These results firmly establish the presence of the oscillatory signals in the asteroseismic data and the viability of several techniques to determine the location of acoustic glitches inside stars.

preprint2013arXiv

Successful Asteroseismology for a Better Characterization of the Exoplanet HAT-P-7b

It is well known that asteroseismology is the unique technique permitting the study of the internal structure of pulsating stars using their pulsational frequencies, which is per se very important. It acquires an additional value when the star turns out to be a planet host. In this case, the asteroseismic study output may be a very important input for the study of the planetary system. With this in mind, we use the large time-span of the Kepler public data obtained for the star system HAT-P-7, first to perform an asteroseismic study of the pulsating star using Time-Dependent-Convection (TDC) models. Secondly, we make a revision of the planet properties in the light of the asteroseismic study.

preprint2012arXiv

A stellar test of the physics of unification

We discuss the feasibility of using solar-type main-sequence stars as probes of fundamental physics and unification. We use a simple polytropic stellar structure model and study its sensitivity to variations of the gravitational, strong and electroweak coupling constants in the context of unification scenarios. We quantify the sensitivity of the Sun's interior temperature to these variations, finding $|Δα/α|\lesssim1.3\times10^{-4}$ for a 'canonical' choice of unification scenario, and discuss prospects for future improvements.

preprint2012arXiv

A uniform asteroseismic analysis of 22 solar-type stars observed by Kepler

Asteroseismology with the Kepler space telescope is providing not only an improved characterization of exoplanets and their host stars, but also a new window on stellar structure and evolution for the large sample of solar-type stars in the field. We perform a uniform analysis of 22 of the brightest asteroseismic targets with the highest signal-to-noise ratio observed for 1 month each during the first year of the mission, and we quantify the precision and relative accuracy of asteroseismic determinations of the stellar radius, mass, and age that are possible using various methods. We present the properties of each star in the sample derived from an automated analysis of the individual oscillation frequencies and other observational constraints using the Asteroseismic Modeling Portal (AMP), and we compare them to the results of model-grid-based methods that fit the global oscillation properties. We find that fitting the individual frequencies typically yields asteroseismic radii and masses to \sim1% precision, and ages to \sim2.5% precision (respectively 2, 5, and 8 times better than fitting the global oscillation properties). The absolute level of agreement between the results from different approaches is also encouraging, with model-grid-based methods yielding slightly smaller estimates of the radius and mass and slightly older values for the stellar age relative to AMP, which computes a large number of dedicated models for each star. The sample of targets for which this type of analysis is possible will grow as longer data sets are obtained during the remainder of the mission.

preprint2012arXiv

Characterizing two solar-type Kepler subgiants with asteroseismology: KIC10920273 and KIC11395018

Determining fundamental properties of stars through stellar modeling has improved substantially due to recent advances in asteroseismology. Thanks to the unprecedented data quality obtained by space missions, particularly CoRoT and Kepler, invaluable information is extracted from the high-precision stellar oscillation frequencies, which provide very strong constraints on possible stellar models for a given set of classical observations. In this work, we have characterized two relatively faint stars, KIC10920273 and KIC11395018, using oscillation data from Kepler photometry and atmospheric constraints from ground-based spectroscopy. Both stars have very similar atmospheric properties; however, using the individual frequencies extracted from the Kepler data, we have determined quite distinct global properties, with increased precision compared to that of earlier results. We found that both stars have left the main sequence and characterized them as follows: KIC10920273 is a one-solar-mass star (M=1.00 +/- 0.04 M_sun), but much older than our Sun (t=7.12 +/- 0.47 Gyr), while KIC11395018 is significantly more massive than the Sun (M=1.27 +/- 0.04 M_sun) with an age close to that of the Sun (t=4.57 +/- 0.23 Gyr). We confirm that the high lithium abundance reported for these stars should not be considered to represent young ages, as we precisely determined them to be evolved subgiants. We discuss the use of surface lithium abundance, rotation and activity relations as potential age diagnostics.

preprint2012arXiv

Estimating the p-mode frequencies of the solar twin 18 Sco

Solar twins have been a focus of attention for more than a decade, because their structure is extremely close to that of the Sun. Today, thanks to high-precision spectrometers, it is possible to use asteroseismology to probe their interiors. Our goal is to use time series obtained from the HARPS spectrometer to extract the oscillation frequencies of 18 Sco, the brightest solar twin. We used the tools of spectral analysis to estimate these quantities. We estimate 52 frequencies using an MCMC algorithm. After examination of their probability densities and comparison with results from direct MAP optimization, we obtain a minimal set of 21 reliable modes. The identification of each pulsation mode is straightforwardly accomplished by comparing to the well-established solar pulsation modes. We also derived some basic seismic indicators using these values. These results offer a good basis to start a detailed seismic analysis of 18 Sco using stellar models.

preprint2012arXiv

Fundamental Properties of Stars using Asteroseismology from Kepler & CoRoT and Interferometry from the CHARA Array

We present results of a long-baseline interferometry campaign using the PAVO beam combiner at the CHARA Array to measure the angular sizes of five main-sequence stars, one subgiant and four red giant stars for which solar-like oscillations have been detected by either Kepler or CoRoT. By combining interferometric angular diameters, Hipparcos parallaxes, asteroseismic densities, bolometric fluxes and high-resolution spectroscopy we derive a full set of near model-independent fundamental properties for the sample. We first use these properties to test asteroseismic scaling relations for the frequency of maximum power (nu_max) and the large frequency separation (Delta_nu). We find excellent agreement within the observational uncertainties, and empirically show that simple estimates of asteroseismic radii for main-sequence stars are accurate to <~4%. We furthermore find good agreement of our measured effective temperatures with spectroscopic and photometric estimates with mean deviations for stars between T_eff = 4600-6200 K of -22+/-32 K (with a scatter of 97K) and -58+/-31 K (with a scatter of 93 K), respectively. Finally we present a first comparison with evolutionary models, and find differences between observed and theoretical properties for the metal-rich main-sequence star HD173701. We conclude that the constraints presented in this study will have strong potential for testing stellar model physics, in particular when combined with detailed modelling of individual oscillation frequencies.

preprint2012arXiv

On the possibility of using seismic probes to study the core composition in pulsating white dwarfs

White dwarfs correspond to the final stages of stellar evolution of solar-type stars. In these objects, production of energy by nuclear burning has ended which means that a white dwarf simply cools down over the course of the next billion years. It is now known that white dwarfs spend some of their cooling history in an instability strip. The pulsating white dwarfs with an hydrogen atmosphere (called DAV or ZZ Ceti stars) show non-radial oscillation modes with periods in the range 100 - 1200s. In this work we try to illustrate how the oscillation p-mode frequencies of idealized white dwarf models change as the result of a different chemical composition in the core, with the ultimate goal of determining the chemical stratification from seismic observations. The presence of acoustic glitches in the internal structure results in a periodic signal in the frequencies. We find that this signal depends on the chemical stratification/composition of the core in a form that can be analytically modelled.

preprint2012arXiv

The radius and mass of the close solar twin 18 Sco derived from asteroseismology and interferometry

The growing interest in solar twins is motivated by the possibility of comparing them directly to the Sun. To carry on this kind of analysis, we need to know their physical characteristics with precision. Our first objective is to use asteroseismology and interferometry on the brightest of them: 18 Sco. We observed the star during 12 nights with HARPS for seismology and used the PAVO beam-combiner at CHARA for interferometry. An average large frequency separation $134.4\pm0.3$ $μ$Hz and angular and linear radiuses of $0.6759 \pm 0.0062$ mas and $1.010\pm0.009$ R$_{\odot}$ were estimated. We used these values to derive the mass of the star, $1.02\pm0.03$ M$_{\odot}$.

preprint2012arXiv

Verifying asteroseismically determined parameters of Kepler stars using hipparcos parallaxes: self-consistent stellar properties and distances

Accurately determining the properties of stars is of prime importance for characterizing stellar populations in our Galaxy. The field of asteroseismology has been thought to be particularly successful in such an endeavor for stars in different evolutionary stages. However, to fully exploit its potential, robust methods for estimating stellar parameters are required and independent verification of the results is mandatory. With this purpose, we present a new technique to obtain stellar properties by coupling asteroseismic analysis with the InfraRed Flux Method. By using two global seismic observables and multi-band photometry, the technique allows us to obtain masses, radii, effective temperatures, bolometric fluxes, and hence distances for field stars in a self-consistent manner. We apply our method to 22 solar-like oscillators in the Kepler short-cadence sample, that have accurate Hipparcos parallaxes. Our distance determinations agree to better than 5%, while measurements of spectroscopic effective temperatures and interferometric radii also validate our results. We briefly discuss the potential of our technique for stellar population analysis and models of Galactic Chemical Evolution.

preprint2011arXiv

Asteroseismology from multi-month Kepler photometry: the evolved Sun-like stars KIC 10273246 and KIC 10920273

The evolved main-sequence Sun-like stars KIC 10273246 (F-type) and KIC 10920273 (G-type) were observed with the NASA Kepler satellite for approximately ten months with a duty cycle in excess of 90%. Such continuous and long observations are unprecedented for solar-type stars other than the Sun. We aimed mainly at extracting estimates of p-mode frequencies - as well as of other individual mode parameters - from the power spectra of the light curves of both stars, thus providing scope for a full seismic characterization. The light curves were corrected for instrumental effects in a manner independent of the Kepler Science Pipeline. Estimation of individual mode parameters was based both on the maximization of the likelihood of a model describing the power spectrum and on a classic prewhitening method. Finally, we employed a procedure for selecting frequency lists to be used in stellar modeling. A total of 30 and 21 modes of degree l=0,1,2 - spanning at least eight radial orders - have been identified for KIC 10273246 and KIC 10920273, respectively. Two avoided crossings (l=1 ridge) have been identified for KIC 10273246, whereas one avoided crossing plus another likely one have been identified for KIC 10920273. Good agreement is found between observed and predicted mode amplitudes for the F-type star KIC 10273246, based on a revised scaling relation. Estimates are given of the rotational periods, the parameters describing stellar granulation and the global asteroseismic parameters $Δν$ and $ν_{\rm{max}}$.

preprint2011arXiv

Constructing a one-solar-mass evolutionary sequence using asteroseismic data from \textit{Kepler}

Asteroseismology of solar-type stars has entered a new era of large surveys with the success of the NASA \textit{Kepler} mission, which is providing exquisite data on oscillations of stars across the Hertzprung-Russell (HR) diagram. From the time-series photometry, the two seismic parameters that can be most readily extracted are the large frequency separation ($Δν$) and the frequency of maximum oscillation power ($ν_\mathrm{max}$). After the survey phase, these quantities are available for hundreds of solar-type stars. By scaling from solar values, we use these two asteroseismic observables to identify for the first time an evolutionary sequence of 1-M$_\odot$ field stars, without the need for further information from stellar models. Comparison of our determinations with the few available spectroscopic results shows an excellent level of agreement. We discuss the potential of the method for differential analysis throughout the main-sequence evolution, and the possibility of detecting twins of very well-known stars.

preprint2011arXiv

Ensemble Asteroseismology of Solar-Type Stars with the NASA Kepler Mission

In addition to its search for extra-solar planets, the NASA Kepler Mission provides exquisite data on stellar oscillations. We report the detections of oscillations in 500 solartype stars in the Kepler field of view, an ensemble that is large enough to allow statistical studies of intrinsic stellar properties (such as mass, radius and age) and to test theories of stellar evolution. We find that the distribution of observed masses of these stars shows intriguing differences to predictions from models of synthetic stellar populations in the Galaxy.

preprint2011arXiv

Evidence for the impact of stellar activity on the detectability of solar-like oscillations observed by Kepler

We use photometric observations of solar-type stars, made by the NASA Kepler Mission, to conduct a statistical study of the impact of stellar surface activity on the detectability of solar-like oscillations. We find that the number of stars with detected oscillations fall significantly with increasing levels of activity. The results present strong evidence for the impact of magnetic activity on the properties of near-surface convection in the stars, which appears to inhibit the amplitudes of the stochastically excited, intrinsically damped solar-like oscillations.

preprint2011arXiv

Fundamental properties of five Kepler stars using global asteroseismic quantities and ground-based observations

We present an asteroseismic study of the solar-like stars KIC 11395018, KIC 10273246, KIC 10920273, KIC 10339342, and KIC 11234888 using short-cadence time series of more than eight months from the Kepler satellite. For four of these stars, we derive atmospheric parameters from spectra acquired with the Nordic Optical Telescope. The global seismic quantities (average large frequency separation and frequency of maximum power), combined with the atmospheric parameters, yield the mean density and surface gravity with precisions of 2% and ~0.03 dex, respectively. We also determine the radius, mass, and age with precisions of 2-5%, 7-11%, and ~35%, respectively, using grid-based analyses. We determine asteroseismic distances to these stars with a precision better than 10%, and constrain the stellar inclination for three of the stars. An Li abundance analysis yields an independent estimate of the age, but this is inconsistent with the asteroseismically determined age for one of the stars. We compare the results from five different grid-based analyses, and we find that they all provide radius and mass values to within 2.4sigma. The absence of a metallicity constraint when the average large frequency separation is measured with a precision of 1% biases the fitted radius and mass for the stars with non-solar metallicity (metal-rich KIC 11395018 and metal-poor KIC 10273246), while including a metallicity constraint reduces the uncertainties in both of these parameters by almost a factor of two. We found that including the average small frequency separation improves the determination of the age only for KIC 11395018 and KIC 11234888, and for the latter this improvement was due to the lack of strong atmospheric constraints. (Abridged).

preprint2011arXiv

Predicting the detectability of oscillations in solar-type stars observed by Kepler

Asteroseismology of solar-type stars has an important part to play in the exoplanet program of the NASA Kepler Mission. Precise and accurate inferences on the stellar properties that are made possible by the seismic data allow very tight constraints to be placed on the exoplanetary systems. Here, we outline how to make an estimate of the detectability of solar-like oscillations in any given Kepler target, using rough estimates of the temperature and radius, and the Kepler apparent magnitude.

preprint2011arXiv

Preparation of Kepler lightcurves for asteroseismic analyses

The Kepler mission is providing photometric data of exquisite quality for the asteroseismic study of different classes of pulsating stars. These analyses place particular demands on the pre-processing of the data, over a range of timescales from minutes to months. Here, we describe processing procedures developed by the Kepler Asteroseismic Science Consortium (KASC) to prepare light curves that are optimized for the asteroseismic study of solar-like oscillating stars in which outliers, jumps and drifts are corrected.

preprint2011arXiv

Seismic analysis of four solar-like stars observed during more than eight months by Kepler

Having started science operations in May 2009, the Kepler photometer has been able to provide exquisite data of solar-like stars. Five out of the 42 stars observed continuously during the survey phase show evidence of oscillations, even though they are rather faint (magnitudes from 10.5 to 12). In this paper, we present an overview of the results of the seismic analysis of 4 of these stars observed during more than eight months.

preprint2011arXiv

Solar-like oscillations in KIC11395018 and KIC11234888 from 8 months of Kepler data

We analyze the photometric short-cadence data obtained with the Kepler Mission during the first eight months of observations of two solar-type stars of spectral types G and F: KIC 11395018 and KIC 11234888 respectively, the latter having a lower signal-to-noise ratio compared to the former. We estimate global parameters of the acoustic (p) modes such as the average large and small frequency separations, the frequency of the maximum of the p-mode envelope and the average linewidth of the acoustic modes. We were able to identify and to measure 22 p-mode frequencies for the first star and 16 for the second one even though the signal-to-noise ratios of these stars are rather low. We also derive some information about the stellar rotation periods from the analyses of the low-frequency parts of the power spectral densities. A model-independent estimation of the mean density, mass and radius are obtained using the scaling laws. We emphasize the importance of continued observations for the stars with low signal-to-noise ratio for an improved characterization of the oscillation modes. Our results offer a preview of what will be possible for many stars with the long data sets obtained during the remainder of the mission.

preprint2011arXiv

Testing Scaling Relations for Solar-Like Oscillations from the Main Sequence to Red Giants using Kepler Data

We have analyzed solar-like oscillations in ~1700 stars observed by the Kepler Mission, spanning from the main-sequence to the red clump. Using evolutionary models, we test asteroseismic scaling relations for the frequency of maximum power (nu_max), the large frequency separation (Delta_nu) and oscillation amplitudes. We show that the difference of the Delta_nu-nu_max relation for unevolved and evolved stars can be explained by different distributions in effective temperature and stellar mass, in agreement with what is expected from scaling relations. For oscillation amplitudes, we show that neither (L/M)^s scaling nor the revised scaling relation by Kjeldsen & Bedding (2011) are accurate for red-giant stars, and demonstrate that a revised scaling relation with a separate luminosity-mass dependence can be used to calculate amplitudes from the main-sequence to red-giants to a precision of ~25%. The residuals show an offset particularly for unevolved stars, suggesting that an additional physical dependency is necessary to fully reproduce the observed amplitudes. We investigate correlations between amplitudes and stellar activity, and find evidence that the effect of amplitude suppression is most pronounced for subgiant stars. Finally, we test the location of the cool edge of the instability strip in the Hertzsprung-Russell diagram using solar-like oscillations and find the detections in the hottest stars compatible with a domain of hybrid stochastically excited and opacity driven pulsation.

preprint2011arXiv

Towards precise asteroseismology of solar-like stars

Adiabatic modeling of solar-like oscillations cannot exceed a certain level of precision for fitting individual frequencies. This is known as the problem of near surface effects on the mode physics. We present a theoretical study which addresses the problem of frequency precision in non-adiabatic models using a time-dependent convection treatment. We find that the number of acceptable model solutions is significantly reduced and more precise constraints can be imposed on the models. Results obtained for a specific star (beta Hydri) lead to very good agreement with both global and local seismic observables. This indicates that the accuracy of model fitting to seismic data is greatly improved when a more complete description of the interaction between convection and pulsation is taken into account.

preprint2010arXiv

A precise asteroseismic age and radius for the evolved Sun-like star KIC 11026764

The primary science goal of the Kepler Mission is to provide a census of exoplanets in the solar neighborhood, including the identification and characterization of habitable Earth-like planets. The asteroseismic capabilities of the mission are being used to determine precise radii and ages for the target stars from their solar-like oscillations. Chaplin et al. (2010) published observations of three bright G-type stars, which were monitored during the first 33.5 days of science operations. One of these stars, the subgiant KIC 11026764, exhibits a characteristic pattern of oscillation frequencies suggesting that it has evolved significantly. We have derived asteroseismic estimates of the properties of KIC 11026764 from Kepler photometry combined with ground-based spectroscopic data. We present the results of detailed modeling for this star, employing a variety of independent codes and analyses that attempt to match the asteroseismic and spectroscopic constraints simultaneously. We determine both the radius and the age of KIC 11026764 with a precision near 1%, and an accuracy near 2% for the radius and 15% for the age. Continued observations of this star promise to reveal additional oscillation frequencies that will further improve the determination of its fundamental properties.

preprint2010arXiv

Asteroseismology of Solar-type Stars with Kepler I: Data Analysis

We report on the first asteroseismic analysis of solar-type stars observed by Kepler. Observations of three G-type stars, made at one-minute cadence during the first 33.5d of science operations, reveal high signal-to-noise solar-like oscillation spectra in all three stars: About 20 modes of oscillation can clearly be distinguished in each star. We discuss the appearance of the oscillation spectra, including the presence of a possible signature of faculae, and the presence of mixed modes in one of the three stars.

preprint2010arXiv

Asteroseismology of Solar-type stars with Kepler II: Stellar Modeling

Observations from the Kepler satellite were recently published for three bright G-type stars, which were monitored during the first 33.5d of science operations. One of these stars, KIC 11026764, exhibits a characteristic pattern of oscillation frequencies suggesting that the star has evolved significantly. We have derived initial estimates of the properties of KIC 11026764 from the oscillation frequencies observed by Kepler, combined with ground-based spectroscopic data. We present preliminary results from detailed modeling of this star, employing a variety of independent codes and analyses that attempt to match the asteroseismic and spectroscopic constraints simultaneously.

preprint2010arXiv

Atmospheric parameters and pulsational properties for a sample of $δ$\,Sct, $γ$\,Dor, and hybrid {\it Kepler} targets

We report spectroscopic observations for 19 $δ$\,Sct candidates observed by the {\it Kepler} satellite both in long and short cadence mode. For all these stars, by using spectral synthesis, we derive the effective temperature, the surface gravity and the projected rotational velocity. An equivalent spectral type classification has been also performed for all stars in the sample. These determinations are fundamental for modelling the frequency spectra that will be extracted from the {\it Kepler} data for asteroseismic inference. For all the 19 stars, we present also periodograms obtained from {\it Kepler} data. We find that all stars show peaks in both low- ($γ$\,Dor; g mode) and high-frequency ($δ$\,Sct; p mode) regions. Using the amplitudes and considering 5\,c/d as a boundary frequency, we classified 3 stars as pure $γ$\,Dor, 4 as $γ$\,Dor\,-\,$δ$\ hybrid, Sct, 5 as $δ$\,Sct\,-\,$γ$\,Dor hybrid, and 6 as pure $δ$\,Sct. The only exception is the star KIC\,05296877 which we suggest could be a binary.

preprint2010arXiv

Hybrid gamma Doradus - delta Scuti pulsators: New insights into the physics of the oscillations from Kepler observations

Observations of the pulsations of stars can be used to infer their interior structure and test theoretical models. The main sequence $γ$ Doradus (Dor) and $δ$ Scuti (Sct) stars with masses 1.2-2.5 $M_{\sun}$ are particularly useful for these studies. The $γ$ Dor stars pulsate in high-order $g$ modes with periods of order 1 day, driven by convective blocking at the base of their envelope convection zone. The $δ$ Sct stars pulsate in low-order $g$ and $p$ modes with periods of order 2 hours, driven by the $κ$ mechanism operating in the Heii ionization zone. Theory predicts an overlap region in the Hertzsprung-Russell diagram between instability regions, where 'hybrid' stars pulsating in both types of modes should exist. The two types of modes with properties governed by different portions of the stellar interior provide complementary model constraints. Among the known $γ$ Dor and $δ$ Sct stars, only four have been confirmed as hybrids. Now, analysis of combined Quarter 0 and Quarter 1 Kepler data for hundreds of variable stars shows that the frequency spectra are so rich that there are practically no pure $δ$ Sct or $γ$ Dor pulsators, i.e. essentially all of the stars show frequencies in both the $δ$ Sct and $γ$ Dor frequency range. A new observational classification scheme is proposed that takes into account the amplitude as well as the frequency, and is applied to categorize 234 stars as $δ$ Sct, $γ$ Dor, $δ$ Sct/$γ$ Dor or $γ$ Dor/$δ$ Sct hybrids.

preprint2010arXiv

Might intermediate-order g modes observed in the CoRoT hybrid gamma Doradus/delta Scuti star HD 49434 be stochastically excited?

The primary target in the seismo-field of CoRoT, HD 49434, known to be a bona fide hybrid gamma Doradus/delta Scuti, shows excited intermediate-order g modes. Time-Dependent Convection models, however, predict a range in frequency that is stable to pulsations, between the simultaneously excited high-order g modes (gamma Dor) and low-order p and g modes (delta Sct). Furthermore, theoretical studies based on model computations of delta Sct stars suggest that stochastically excited modes are likely to be observed. A pertinent question would then be to ask: Might those observed intermediate-order g modes be stochastically excited? By employing a statistical method which searches for the signature of stochastic excitation in stellar pulsations, we investigate the nature of those modes with possible implications on the identification of their excitation mechanism. Preliminary results are rather inconclusive about the presence of stochastic excitation. A new analysis that thoroughly takes into account sampling effects is necessary in order to get more reliable results.

preprint2010arXiv

The asteroseismic potential of Kepler: first results for solar-type stars

We present preliminary asteroseismic results from Kepler on three G-type stars. The observations, made at one-minute cadence during the first 33.5d of science operations, reveal high signal-to-noise solar-like oscillation spectra in all three stars: About 20 modes of oscillation may be clearly distinguished in each star. We discuss the appearance of the oscillation spectra, use the frequencies and frequency separations to provide first results on the radii, masses and ages of the stars, and comment in the light of these results on prospects for inference on other solar-type stars that Kepler will observe.

preprint2009arXiv

Kepler Asteroseismology Program: Introduction and First Results

Asteroseismology involves probing the interiors of stars and quantifying their global properties, such as radius and age, through observationsof normal modes of oscillation. The technical requirements for conducting asteroseismology include ultra-high precision measured in photometry in parts per million, as well as nearly continuous time series over weeks to years, and cadences rapid enough to sample oscillations with periods as shortas a few minutes. We report on results from the first 43 days of observations in which the unique capabilities of Kepler in providing a revolutionary advance in asteroseismology are already well in evidence. The Kepler asteroseismology program holds intrinsic importance in supporting the core planetary search program through greatly enhanced knowledge of host star properties, and extends well beyond this to rich applications in stellar astrophysics.

preprint2009arXiv

Multisite photometry of the pulsating Herbig Ae star V346 Ori

CONTEXT: The study of pulsation in Pre--Main--Sequence intermediate-mass stars represents an important tool for deriving information on fundamental stellar parameters and internal structure, as well as for testing current theoretical models. Interest in this class of variable stars has significantly increased during the last decade and about 30 members are presently known in the literature. AIMS: We have constructed the frequency spectrum of the oscillations in V346 Ori. We apply asteroseismic tools to these data to estimate the intrinsic parameters (mass, luminosity, effective temperature) of V346 Ori and to obtain information on its internal structure. METHODS: CCD time series photometry in the Johnson V filter has been obtained for a total of 145.7 h of observations distributed over 36 nights. The resulting light curves have been subjected to a detailed frequency analysis using updated numerical techniques. Photometric and spectroscopic data have also been acquired to determine reliable estimates of the stellar properties. RESULTS: We have identified 13 oscillation frequencies, 6 of which with higher significance. These have been compared with the predictions of non-radial adiabatic models. The resulting best fit model has a mass of 2.1$\pm$0.2 $M_{\odot}$, luminosity $\log{L/L_{\odot}}=1.37^{+0.11}_{-0.13}$, and effective temperature 7300$\pm$200 K. These values are marginally consistent with the association of V346 Ori to Orion OB1a. Alternatively, V346 Ori could be placed at a slightly larger distance than previously estimated.

preprint2007arXiv

The complementary roles of interferometry and asteroseismology in determining the mass of solar-type stars

How important is an independent diameter measurement for the determination of stellar parameters of solar-type stars? When coupled with seismic observables, how well can we determine the stellar mass? If we can determine the radius of the star to between 1% and 4%, how does this affect the theoretical uncertainties? Interferometry can provide an independent radius determination and it has been suggested that we should expect at least a 4% precision on such a measurement for nearby solar-type stars. This study aims to provide both qualitative and quantitive answers to these questions for a star such as our Sun, where seismic information will be available. We show that the importance of an independent radius measurement depends on the combination of observables available and the size of the measurement errors. It is important for determining all stellar parameters and in particular the mass, where a good radius measurement can even allow us to determine the mass with a precision better than 2%. Our results also show that measuring the small frequency separation significantly improves the determination of the evolutionary stage and the mixing-length parameter.

preprint2003arXiv

Multisite observations of the PMS delta Scuti star V351 Ori

We present the results of multisite observations spanning two years on the pre--main-sequence (PMS) star V351 Ori. A total of around 180 hours of observations over 29 nights have been collected, allowing us to measure five different periodicities, most likely related to the delta Scuti variability of V351 Ori. Comparison with the predictions of linear nonadiabatic radial pulsation models put stringent constraints on the stellar parameters and indicate that the distance to V351 Ori is intermediate between the lower limit measured by Hipparcos (210 pc) and that of the Orion Nebula (450 pc). However, radial pulsation models are unable to reproduce all of the observed frequencies with a single choice of (M, L, and Te), suggesting the presence of additional nonradial modes.