Source author record

L. W. Yang

L. W. Yang appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

cond-mat.mtrl-sci cond-mat.mes-hall

Catalog footprint

What is connected

3works

2topics

4close collaborators

Actions

Connect this record

Open graph Browse works

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2020arXiv

Nanomechanical characterization of the fracture toughness of Al/SiC nanolaminates

The fracture toughness of Al/SiC nanolaminates with different layer thicknesses (in the range 10 to 100 nm) was measured by means of micropillar splitting and bending of a notched beam. The crack plane was perpendicular to the layers in the former while notched beams with the notch parallel and perpendicular to the layers were milled in the latter. It was found that crack propagation parallel to the layers took place along the metal-ceramic interfaces and the toughness increased with the layer thickness due to the contribution of the plastic deformation of the Al layers. Crack propagation perpendicular to the layers showed evidence of crack deflection/arrest at the interface. The toughness in this orientation increased as the layer thickness decreased due to the higher density of interfaces except for the nanolaminates with 10 nm layer thickness. In the latter case, crack propagation took place along the weak columnar grain boundaries, leading to a marked reduction in toughness.

preprint2016arXiv

Selective oxidation-induced strengthening of Zr/Nb nanoscale multilayers

The paper presents a new approach, based on controlled oxidation of nanoscale metallic multilayers, to produce strong and hard oxide/metal nanocomposite coatings with high strength and good thermal stability. The approach is demonstrated by performing long term annealing on sputtered Zr/Nb nanoscale metallic multilayers and investigating the evolution of their microstructure and mechanical properties by combining analytical transmission electron microscopy, nano-mechanical tests and finite element models. As-deposited multilayers were annealed at 350 C in air for times ranging between 1 - 336 hours. The elastic modulus increased by approx. 20% and the hardness by approx. 42% after 15 hours of annealing. Longer annealing times did not lead to changes in hardness, although the elastic modulus increased up to 35% after 336 hrs. The hcp Zr layers were rapidly transformed into monoclinic ZrO2 (in the first 15 hours), while the Nb layers were progressively oxidised, from top surface down towards the substrate, to form an amorphous oxide phase at a much lower rate. The sequential oxidation of Zr and Nb layers was key for the oxidation to take place without rupture of the multi-layered structure and without coating spallation, as the plastic deformation of the metallic Nb layers allowed for the partial relieve of the residual stresses developed as a result of the volumetric expansion of the Zr layers upon oxidation. Moreover, the development of residual stresses induced further changes in mechanical properties in relation to the annealing time, as revealed by finite element simulations.

preprint2011arXiv

Raman spectroscopic determination of the length, strength, compressibility, Debye temperature, elasticity, and force constant of the C-C bond in graphene

From the perspective of bond relaxation and vibration, we have reconciled the Raman shifts of graphene under the stimuli of the number-of-layer, uni-axial-strain, pressure, and temperature in terms of the response of the length and strength of the representative bond of the entire specimen to the applied stimuli. Theoretical unification of the measurements clarifies that: (i) the opposite trends of Raman shifts due to number-of-layer reduction indicate that the G-peak shift is dominated by the vibration of a pair of atoms while the D- and the 2D-peak shifts involves z-neighbor of a specific atom; (ii) the tensile strain-induced phonon softening and phonon-band splitting arise from the asymmetric response of the C3v bond geometry to the C2v uni-axial bond elongation; (iii) the thermal-softening of the phonons originates from bond expansion and weakening; and (iv) the pressure- stiffening of the phonons results from bond compression and work hardening. Reproduction of the measurements has led to quantitative information about the referential frequencies from which the Raman frequencies shift, the length, energy, force constant, Debye temperature, compressibility, elastic modulus of the C-C bond in graphene, which is of instrumental importance to the understanding of the unusual behavior of graphene.