Source author record

Jen-Chieh Cheng

Jen-Chieh Cheng appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

2works
1topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

2 published item(s)

preprint2022arXiv

Development of digital sideband separating down-conversion for Yuan-Tseh Lee Array

This report presents a down-conversion method involving digital sideband separation for the Yuan Tseh Lee Array to double the processing bandwidth. The receiver consists of a MMIC HEMT LNA frontend operating at a wavelength of 3 mm, and sub-harmonic mixers that output signals at intermediate frequencies of 2 - 18 GHz. The sideband separation scheme involves an analog 90 degree hybrid followed by two mixers that provide down conversion of the IF signal to a pair of in phase (I) and quadrature (Q) signals in baseband. The I and Q baseband signals are digitized using 5 Giga sample per second analog to digital converters. A second hybrid is digitally implemented using field programmable gate arrays to produce two sidebands, each with a bandwidth of 1.6 GHz. The 2 x 1.6 GHz band can be tuned to cover any 3.2 GHz window within the aforementioned IF range of the array. Sideband rejection ratios (SRRs) above 20 dB can be obtained across the 3.2 GHz bandwidth by equalizing the power and delay between the I and Q baseband signals. Furthermore, SRRs above 30 dB can be achieved when calibration is applied.

preprint2022arXiv

Metal Mesh IR Filter for wSMA

Since the start of full science operations from 2004, the Submillimeter Array has been implementing plans to expand IF bandwidths and upgrade receivers and cryostats. Metal mesh low-pass filters were designed to block infrared (IR) radiation to reduce the thermal load on the cryostats. Filters were fabricated on a quartz wafer through photolithography and coated with anti-reflection (AR) material. The filters were tested from 200 to 400 GHz to verify their passband performances. The measurement results were found to be in good agreement with EM simulation results. They were tested in the far-infrared (FIR) frequency range to verify out-of-band rejection. The IR reflectivity was found to be approximately 70%, which corresponded to the percentage of the area blocked by metal.