Discrete Element Simulation of Transverse Cracking During the Pyrolysis of Carbon Fibre Reinforced Plastics to Carbon/Carbon Composites
The fracture behavior of fiber-ceramics like C/C-SiC strongly depends on the initial damage arising during the production process. We study the transverse cracking of the 90° ply in [0/90]S cross-ply laminates due to the thermochemical degradation of the matrix material during the carbonization process by means of a discrete element method. The crack morphology strongly depends on the fiber-matrix interface properties, the transverse ply thickness as well as on the carbonization process itself. To model the 90° ply a two-dimensional triangular lattice of springs is constructed where nodes of the lattice represent fibers. Springs with random breaking thresholds model the disordered matrix material and interfaces. The spring-lattice is coupled by interface springs to two rigid bars which capture the two 0° plies or adjacent sublaminates in the model. Molecular dynamics simulation is used to follow the time evolution of the model system. It was found that under gradual heating of the specimen, after some distributed cracking, segmentation cracks occur in the 90° ply which then develop into a saturated state where the ply cannot support additional load. The dependence of the micro-structure of damage on the ply thickness and on the disorder in spring properties is also studied. Crack density and porosity of the system are monitored as a function of the temperature and compared to an analytic approach and experiments.