Physical properties of a fan-shaped jet backlit by an X9.3 flare
Fan-shaped jets can be observed above light bridges and are driven by reconnection of the vertical umbral field with the more horizontal field above the light bridges. Because these jets are not fully opaque in chromospheric lines, one cannot study their spectra without the highly complex considerations of radiative transfer in spectral lines from the atmosphere behind the fan. We get around this by taking advantage of a unique set of observations of the H$α$ line along with the Ca II 8542 and Ca II K lines obtained with the Swedish 1-m Solar Telescope where a fan-shaped jet was backlit by an X9.3 flare. The H$α$ flare ribbon emission profiles from behind the fan are highly broadened and flattened, allowing us to investigate the fan as if it were backlit by continuous emission. Using this model we derived the opacity and velocity of the material in the jet and what we believe to be the first observationally derived estimate of the mass and density of material in a fan-shaped jet. Using inversions of Ca II 8542 emission via STiC, we were also able to estimate the temperature in the jet. Finally, we use the masses and POS and LOS velocities as functions of time to investigate the downward supply of energy and momentum to the photosphere in the collapse of this jet, and evaluate it as a potential driver for a sunquake beneath. We found that the physical properties of the fan material are reasonably chromospheric in nature, with a temperature of 7050 $\pm$ 250 K and a mean density of 2 $\pm$ 0.3 $\times$ 10$^{-11}$ g cm$^{-3}$. The total mass observed in $\mathrm{Hα}$ was found to be 3.9 $\pm$ 0.7 $\times$ 10$^{13}$g and the kinetic energy delivered to the base of the fan in its collapse was nearly two orders of magnitude below typical sunquake energies. We therefore rule out this jet as the sunquake driver, but cannot completely rule out larger fan jets as potential drivers.