Source author record

J. Blum

J. Blum appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

astro-ph.EP astro-ph.IM physics.space-ph

Catalog footprint

What is connected

14works

3topics

4close collaborators

Actions

Connect this record

Open graph Browse works

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2021arXiv

Cometary dust analogues for physics experiments

The CoPhyLab (Cometary Physics Laboratory) project is designed to study the physics of comets through a series of earth-based experiments. For these experiments, a dust analogue was created with physical properties comparable to those of the non-volatile dust found on comets. This "CoPhyLab dust" is planned to be mixed with water and CO$_2$ ice and placed under cometary conditions in vacuum chambers to study the physical processes taking place on the nuclei of comets. In order to develop this dust analogue, we mixed two components representative for the non-volatile materials present in cometary nuclei. We chose silica dust as representative for the mineral phase and charcoal for the organic phase, which also acts as a darkening agent. In this paper, we provide an overview of known cometary analogues before presenting measurements of eight physical properties of different mixtures of the two materials and a comparison of these measurements with known cometary values. The physical properties of interest are: particle size, density, gas permeability, spectrophotometry, mechanical, thermal and electrical properties. We found that the analogue dust that matches the highest number of physical properties of cometary materials consists of a mixture of either 60\%/40\% or 70\%/30\% of silica dust/charcoal by mass. These best-fit dust analogue will be used in future CoPhyLab experiments.

preprint2020arXiv

The tensile strength of compressed dust samples and the catastrophic disruption threshold of pre-planetary matter

During the planetary formation process, mutual collisions among planetesimals take place, making an impact on their porosity evolution. The outcome of these collisions depends, among other parameters, on the tensile strength of the colliding objects. In the first stage of this work, we performed impact experiments into dust samples, assembled with material analogous to that of the primitive Solar System, to obtain highly compressed samples that represent the porosities measured in chondritic meteorites. In the second stage, we obtained the tensile strengths of the compressed dust samples by the Brazilian Disk Test. We found a correlation between the tensile strength and the volume filling factor of the compressed dust samples and obtained the corresponding critical fragmentation strength in mutual collisions and its dependence on the volume filling factor. Finally, we give prescriptions for the catastrophic disruption threshold as a function of the object size, for different values of the volume filling factor that can be utilized in collisional models.

preprint2016arXiv

Comet formation in collapsing pebble clouds. What cometary bulk density implies for the cloud mass and dust-to-ice ratio

Comets are remnants of the icy planetesimals that formed beyond the ice line in the Solar Nebula. Growing from micrometre-sized dust and ice particles to km-sized objects is, however, difficult because of growth barriers and time scale constraints. The gravitational collapse of pebble clouds that formed through the streaming instability may provide a suitable mechanism for comet formation. We study the collisional compression of cm-sized porous ice/dust-mixed pebbles in collapsing pebble clouds. For this, we developed a collision model for pebbles consisting of a mixture of ice and dust, characterised by their dust-to-ice mass ratio. Using the final compression of the pebbles, we constrain combinations of initial cloud mass, initial pepple porosity, and dust-to-ice ratio that lead to cometesimals which are consistent with observed bulk properties of cometary nuclei. We find that observed high porosity and low density of ~0.5 g/cc of comet nuclei can only be explained if comets formed in clouds with mass approximately M>1e18 g. Lower mass clouds would only work if the pebbles were initially very compact. Furthermore, the dust-to-ice ratio must be in the range of between 3 and 9 to match the observed bulk properties of comet nuclei. (abridged version)

preprint2016arXiv

Why are Jupiter-family comets active and asteroids in cometary-like orbits inactive?

Context: Surveys in the visible and near-infrared spectral range have revealed the presence of low-albedo asteroids in cometary like orbits (ACOs). In contrast to Jupiter family comets (JFCs), ACOs are inactive, but possess similar orbital parameters. Aims: In this work, we discuss why ACOs are inactive, whereas JFCs show gas-driven dust activity, although both belong to the same class of primitive solar system bodies. Methods: We hypothesize that ACOs and JFCs have formed under the same physical conditions, namely by the gravitational collapse of ensembles of ice and dust aggregates. We use the memory effect of dust-aggregate layers under gravitational compression to discuss under which conditions the gas-driven dust activity of these bodies is possible. Results: Owing to their smaller sizes, JFCs can sustain gas-driven dust activity much longer than the bigger ACOs, whose sub-surface regions possess an increased tensile strength, due to gravitational compression of the material. The increased tensile strength leads to the passivation against dust activity after a relatively short time of activity. Conclusions: The gravitational-collapse model of the formation of planetesimals, together with the gravitational compression of the sub-surface material simultaneously, explains the inactivity of ACOs and the gas-driven dust activity of JFCs. Their initially larger sizes means that ACOs possess a higher tensile strength of their sub-surface material, which leads to a faster termination of gas-driven dust activity. Most objects with radii larger than $2 \, \mathrm{km}$ have already lost their activity due to former gravitational compression of their current surface material.

preprint2015arXiv

Collisions of small ice particles under microgravity conditions (II): Does the chemical composition of the ice change the collisional properties?

Context: Understanding the collisional properties of ice is important for understanding both the early stages of planet formation and the evolution of planetary ring systems. Simple chemicals such as methanol and formic acid are known to be present in cold protostellar regions alongside the dominant water ice; they are also likely to be incorporated into planets which form in protoplanetary disks, and planetary ring systems. However, the effect of the chemical composition of the ice on its collisional properties has not yet been studied. Aims: Collisions of 1.5 cm ice spheres composed of pure crystalline water ice, water with 5% methanol, and water with 5% formic acid were investigated to determine the effect of the ice composition on the collisional outcomes. Methods: The collisions were conducted in a dedicated experimental instrument, operated under microgravity conditions, at relative particle impact velocities between 0.01 and 0.19 m s^-1, temperatures between 131 and 160 K and a pressure of around 10^-5 mbar. Results: A range of coefficients of restitution were found, with no correlation between this and the chemical composition, relative impact velocity, or temperature. Conclusions: We conclude that the chemical composition of the ice (at the level of 95% water ice and 5% methanol or formic acid) does not affect the collisional properties at these temperatures and pressures due to the inability of surface wetting to take place. At a level of 5% methanol or formic acid, the structure is likely to be dominated by crystalline water ice, leading to no change in collisional properties. The surface roughness of the particles is the dominant factor in explaining the range of coefficients of restitution.

preprint2015arXiv

What drives the dust activity of comet 67P/Churyumov-Gerasimenko?

We use the gravitational instability formation scenario of cometesimals to derive the aggregate size that can be released by the gas pressure from the nucleus of comet 67P/Churyumov-Gerasimenko for different heliocentric distances and different volatile ices. To derive the ejected aggregate sizes, we developed a model based on the assumption that the entire heat absorbed by the surface is consumed by the sublimation process of one volatile species. The calculations were performed for the three most prominent volatile materials in comets, namely, H_20 ice, CO_2 ice, and CO ice. We find that the size range of the dust aggregates able to escape from the nucleus into space widens when the comet approaches the Sun and narrows with increasing heliocentric distance, because the tensile strength of the aggregates decreases with increasing aggregate size. The activity of CO ice in comparison to H_20 ice is capable to detach aggregates smaller by approximately one order of magnitude from the surface. As a result of the higher sublimation rate of CO ice, larger aggregates are additionally able to escape from the gravity field of the nucleus. Our model can explain the large grains (ranging from 2 cm to 1 m in radius) in the inner coma of comet 67P/Churyumov-Gerasimenko that have been observed by the OSIRIS camera at heliocentric distances between 3.4 AU and 3.7 AU. Furthermore, the model predicts the release of decimeter-sized aggregates (trail particles) close to the heliocentric distance at which the gas-driven dust activity vanishes. However, the gas-driven dust activity cannot explain the presence of particles smaller than ~1 mm in the coma because the high tensile strength required to detach these particles from the surface cannot be provided by evaporation of volatile ices. These smaller particles can be produced for instance by spin-up and centrifugal mass loss of ejected larger aggregates.

preprint2014arXiv

Collisions of small ice particles under microgravity conditions

Planetisimals are thought to be formed from the solid material of a protoplanetary disk by a process of dust aggregation. It is not known how growth proceeds to kilometre sizes, but it has been proposed that water ice beyond the snowline might affect this process. To better understand collisional processes in protoplanetary disks leading to planet formation, the individual low velocity collisions of small ice particles were investigated. The particles were collided under microgravity conditions on a parabolic flight campaign using a purpose-built, cryogenically cooled experimental setup. The setup was capable of colliding pairs of small ice particles (between 4.7 and 10.8 mm in diameter) together at relative collision velocities of between 0.27 and 0.51 m s ^-1 at temperatures between 131 and 160 K. Two types of ice particle were used: ice spheres and irregularly shaped ice fragments. Bouncing was observed in the majority of cases with a few cases of fragmentation. A full range of normalised impact parameters (b/R = 0.0-1.0) was realised with this apparatus. Coefficients of restitution were evenly spread between 0.08 and 0.65 with an average value of 0.36, leading to a minimum of 58% of translational energy being lost in the collision. The range of coefficients of restitution is attributed to the surface roughness of the particles used in the study. Analysis of particle rotation shows that up to 17% of the energy of the particles before the collision was converted into rotational energy. Temperature did not affect the coefficients of restitution over the range studied.

preprint2014arXiv

The stickiness of micrometer-sized water-ice particles

Water ice is one of the most abundant materials in dense molecular clouds and in the outer reaches of protoplanetary disks. In contrast to other materials (e.g., silicates) water ice is assumed to be stickier due to its higher specific surface energy, leading to faster or more efficient growth in mutual collisions. However, experiments investigating the stickiness of water ice have been scarce, particularly in the astrophysically relevant micrometer-size region and at low temperatures. In this work, we present an experimental setup to grow aggregates composed of $\mathrmμ$m-sized water-ice particles, which we used to measure the sticking and erosion thresholds of the ice particles at different temperatures between $114 \, \mathrm{K}$ and $260 \, \mathrm{K}$. We show with our experiments that for low temperatures (below $\sim 210 \, \mathrm{K}$), $\mathrmμ$m-sized water-ice particles stick below a threshold velocity of $9.6 \, \mathrm{m \, s^{-1}}$, which is approximately ten times higher than the sticking threshold of $\mathrmμ$m-sized silica particles. Furthermore, erosion of the grown ice aggregates is observed for velocities above $15.3 \, \mathrm{m \, s^{-1}}$. A comparison of the experimentally derived sticking threshold with model predictions is performed to determine important material properties of water ice, i.e., the specific surface energy and the viscous relaxation time. Our experimental results indicate that the presence of water ice in the outer reaches of protoplanetary disks can enhance the growth of planetesimals by direct sticking of particles.

preprint2013arXiv

Thermophysical properties of near-Earth asteroid (341843) 2008 EV5 from WISE data

Aims. To derive the thermal inertia of 2008 EV$_5$, the baseline target for the Marco Polo-R mission proposal, and infer information about the size of the particles on its surface. Methods. Values of thermal inertia are obtained by fitting an asteroid thermophysical model to NASA's Wide-field Infrared Survey Explorer (WISE) infrared data. From the constrained thermal inertia and a model of heat conductivity that accounts for different values of the packing fraction (a measure of the degree of compaction of the regolith particles), grain size is derived. Results. We obtain an effective diameter $D = 370 \pm 6\,\mathrm{m}$, geometric visible albedo $p_V = 0.13 \pm 0.05$ (assuming $H=20.0 \pm 0.4$), and thermal inertia $Γ= 450 \pm 60$ J/m2/s(1/2)/K at the 1-$σ$ level of significance for its retrograde spin pole solution. The regolith particles radius is $r = 6.6^{+1.3}_{-1.3}$ mm for low degrees of compaction, and $r = 12.5^{+2.7}_{-2.6}$ mm for the highest packing densities.

preprint2012arXiv

A note on the survival of the sungrazing comet C/2011 W3 (Lovejoy) within the Roche limit

In this work, a novel approach to explain the survival of sungrazing comets within the Roche limit is presented. It is shown that in the case of low tensile strength of the cometary nucleus, tidal splitting of the nucleus can be prevented by the reaction force caused by the sublimation of the icy constituents. The survival of Comet C/2011 W3 (Lovejoy) within the Roche limit of the Sun is, thus, the result of high tensile strength of the nucleus, or the result of the reaction force caused by the strong outgassing of the icy constituents near the Sun.

preprint2011arXiv

Activity of comets: Gas Transport in the Near-Surface Porous Layers of a Cometary Nucleus

The gas transport through non-volatile random porous media is investigated numerically. We extend our previous research of the transport of molecules inside the uppermost layer of a cometary surface (Skorov and Rickmann, 1995; Skorov et al. 2001). We assess the validity of the simplified capillary model and its assumptions to simulate the gas flux trough the porous dust mantle as it has been applied in cometary physics. A new microphysical computational model for molecular transport in random porous media formed by packed spheres is presented. The main transport characteristics such as the mean free path distribution and the permeability are calculated for a wide range of model parameters and compared with those obtained by more idealized models. The focus in this comparison is on limitations inherent in the capillary model. Finally a practical way is suggested to adjust the algebraic Clausing formula taking into consideration the nonlinear dependence of permeability on layer porosity. The retrieved dependence allows us to accurately calculate the permeability of layers whose thickness and porosity vary in the range of values expected for the near-surface regions of a cometary nucleus.

preprint2010arXiv

The outcome of protoplanetary dust growth: pebbles, boulders, or planetesimals? II. Introducing the bouncing barrier

The sticking of micron sized dust particles due to surface forces in circumstellar disks is the first stage in the production of asteroids and planets. The key ingredients that drive this process are the relative velocity between the dust particles in this environment and the complex physics of dust aggregate collisions. Here we present the results of a collision model, which is based on laboratory experiments of these aggregates. We investigate the maximum aggregate size and mass that can be reached by coagulation in protoplanetary disks. We model the growth of dust aggregates at 1 AU at the midplane at three different gas densities. We find that the evolution of the dust does not follow the previously assumed growth-fragmentation cycles. Catastrophic fragmentation hardly occurs in the three disk models. Furthermore we see long lived, quasi-steady states in the distribution function of the aggregates due to bouncing. We explore how the mass and the porosity change upon varying the turbulence parameter and by varying the critical mass ratio of dust particles. Particles reach Stokes numbers of roughly 10^-4 during the simulations. The particle growth is stopped by bouncing rather than fragmentation in these models. The final Stokes number of the aggregates is rather insensitive to the variations of the gas density and the strength of turbulence. The maximum mass of the particles is limited to approximately 1 gram (chondrule-sized particles). Planetesimal formation can proceed via the turbulent concentration of these aerodynamically size-sorted chondrule-sized particles.

preprint2009arXiv

A Zero-Gravity Instrument to Study Low Velocity Collisions of Fragile Particles at Low Temperatures

We discuss the design, operation, and performance of a vacuum setup constructed for use in zero (or reduced) gravity conditions to initiate collisions of fragile millimeter-sized particles at low velocity and temperature. Such particles are typically found in many astronomical settings and in regions of planet formation. The instrument has participated in four parabolic flight campaigns to date, operating for a total of 2.4 hours in reduced gravity conditions and successfully recording over 300 separate collisions of loosely packed dust aggregates and ice samples. The imparted particle velocities achieved range from 0.03-0.28 m s^-1 and a high-speed, high-resolution camera captures the events at 107 frames per second from two viewing angles separated by either 48.8 or 60.0 degrees. The particles can be stored inside the experiment vacuum chamber at temperatures of 80-300 K for several uninterrupted hours using a built-in thermal accumulation system. The copper structure allows cooling down to cryogenic temperatures before commencement of the experiments. Throughout the parabolic flight campaigns, add-ons and modifications have been made, illustrating the instrument flexibility in the study of small particle collisions.

preprint2009arXiv

Morphological effects on IR band profiles: Experimental spectroscopic analysis with application to observed spectra of oxygen-rich AGB stars

To trace the source of the unique 13, 19.5, and 28 $μ$m emission features in the spectra of oxygen-rich circumstellar shells around AGB stars, we have compared dust extinction spectra obtained by aerosol measurements. We have measured the extinction spectra for 19 oxide powder samples of eight different types, such as Ti-compounds (TiO, TiO$_2$, Ti$_2$O$_3$, Ti$_3$O$_5$, Al$_2$TiO$_5$, CaTiO$_3$), $α$-, $γ$-, $χ$-$δ$-$κ$-Al$_2$O$_3$, and MgAl$_2$O$_4$ in the infrared region (10 - 50 $μ$m) paying special attention to the morphological (size, shape, and agglomeration) effects and the differences in crystal structure. Anatase (TiO$_2$) particles with rounded edges are the possible 13, 19.5 and 28 $μ$m band carriers as the main contributor in the spectra of AGB stars, and spherically shaped nano-sized spinel and Al$_2$TiO$_5$ dust grains are possibly associated with the anatase, enhancing the prominence of the 13 $μ$m feature and providing additional features at 28 $μ$m. The extinction data sets obtained by the aerosol and CsI pellet measurements have been made available for public use at http://elbe.astro.uni-jena.de

J. Blum

What is connected

Connect this record

See the researcher in context

Building this map preview

14 published item(s)

Cometary dust analogues for physics experiments

The tensile strength of compressed dust samples and the catastrophic disruption threshold of pre-planetary matter

Comet formation in collapsing pebble clouds. What cometary bulk density implies for the cloud mass and dust-to-ice ratio

Why are Jupiter-family comets active and asteroids in cometary-like orbits inactive?

Collisions of small ice particles under microgravity conditions (II): Does the chemical composition of the ice change the collisional properties?

What drives the dust activity of comet 67P/Churyumov-Gerasimenko?

Collisions of small ice particles under microgravity conditions

The stickiness of micrometer-sized water-ice particles

Thermophysical properties of near-Earth asteroid (341843) 2008 EV5 from WISE data

A note on the survival of the sungrazing comet C/2011 W3 (Lovejoy) within the Roche limit

Activity of comets: Gas Transport in the Near-Surface Porous Layers of a Cometary Nucleus

The outcome of protoplanetary dust growth: pebbles, boulders, or planetesimals? II. Introducing the bouncing barrier

A Zero-Gravity Instrument to Study Low Velocity Collisions of Fragile Particles at Low Temperatures

Morphological effects on IR band profiles: Experimental spectroscopic analysis with application to observed spectra of oxygen-rich AGB stars