Source author record

H. Kumawat

H. Kumawat appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

13works
7topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

13 published item(s)

preprint2022arXiv

Inclusive $α$ Production for $^{6}$Li+$^{51}$V System

Measurement of angular distributions and energy spectra of $α$ and deuterons through breakup, transfer and incomplete fusion processes to dis-entangle their relative contributions and to investigate relative importance of breakup-fusion compared to transfer. Inclusive $α$ production cross-sections have been measured for $^6$Li + $^{51}$V system near Coulomb barrier energies. Theoretical calculations for estimation of various reaction channels contributing to $α$ production have been performed with finite range coupled reaction method using \textsc{FRESCO} code. The cross-sections from non-capture breakup (NCBU) ($α$ + \textit{d}) and 1\textit{n}, 1\textit{p}, and 1\textit{d} transfer channels, compound nuclear decay channel and incomplete fusion (ICF) leading to $α$ production were estimated to get the cumulative production cross-sections. Contributions from breakup, transfer and incomplete fusion channels could reproduce the integral direct $α$ production cross-sections and their angular distributions quite well. The direct $α$ production cross-sections are in agreement with other targets. The $α$ production cross-sections are higher compared to the deuteron production. Kinematic analysis of the energy spectra of $α$ particles and deuterons suggest that $α$ particle spectra is dominated by breakp-fusion and deuteron spectra have contribution of breakup and transfer reactions. A systematic study of direct $α$ production with various targets follow a universal behavior on average but noticeable differences are observed for different targets. A ratio of $α$ and deuteron yields for a wide mass range of targets shows a saturation above barrier and an increasing production of $α$ particles relative to deuteron around Coulomb barrier.

preprint2022arXiv

Reaction mechanism study for multinucleon transfer processes in collisions of spherical and deformed nuclei at energies near and above the Coulomb barrier: The $^{16}$O+$^{154}$Sm reaction

Background: Multinucleon transfer reactions at energies around the Coulomb barrier offer a vital opportunity to study rich physics of nuclear structure and dynamics. Despite the continuous development in the field, we have still limited knowledge about how deformation - one of the representative nuclear structures - affects multinucleon transfer reactions. Purpose: To shed light on the effect of deformation in multinucleon transfer processes, we study the $^{16}$O+$^{154}$Sm reaction at $E_{\rm lab}$=85 MeV (around the Coulomb barrier) and 134 MeV (substantially above the Coulomb barrier), where the target nucleus, $^{154}$Sm, is a well-established, deformed nucleus. Results: Angular distributions for elastic scattering and for various transfer channels were measured over a wide angular range at the BARC-TIFR pelletron-Linac accelerator facility, Mumbai. The $Q$-value- and angle-integrated isotope production cross sections have been extracted from the measured angular distributions. The experimental data are analyzed along with time-dependent Hartree-Fock calculations. For the lower incident energy case, we find a reasonable agreement between the measurements and the TDHF calculations for a-few-nucleon transfer channels; whereas TDHF underestimates cross sections for many-nucleon transfers, consistent with earlier works. On the other side, we find that calculated cross sections for secondary reaction products for the higher incident energy case, qualitatively explains the measured trends of isotopic distributions observed for the lower energy. The latter observation indicates possible underestimation of excitation energies in the present TDHF+GEMINI analysis. Although certain orientation effects were observed in TDHF results, it is difficult to disentangle them from the $Q$-value- and angle-integrated production cross sections. (Shortened due to the arXiv's length limit.)

preprint2021arXiv

Modeling the triple-GEM detector response to background particles for the CMS Experiment

An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The simulation framework uses a combination of the FLUKA and Geant4 packages to obtain the hit rate. FLUKA provides the radiation environment around the GE1/1 chambers, which is comprised of the particle flux with momentum direction and energy spectra ranging from $10^{-11}$ to $10^{4}$ MeV for neutrons, $10^{-3}$ to $10^{4}$ MeV for $γ$'s, $10^{-2}$ to $10^{4}$ MeV for $e^{\pm}$, and $10^{-1}$ to $10^{4}$ MeV for charged hadrons. Geant4 provides an estimate of detector response (sensitivity) based on an accurate description of detector geometry, material composition and interaction of particles with the various detector layers. The MC simulated hit rate is estimated as a function of the perpendicular distance from the beam line and agrees with data within the assigned uncertainties of 10-14.5%. This simulation framework can be used to obtain a reliable estimate of background rates expected at the High Luminosity LHC.

preprint2020arXiv

Accelerator Based Production of $^{225}$Ac for Cancer Treatment

Targeted Alpha Therapy potentially offers a more specific action in killing tumor cells and less damage to neighbouring normal cells compared to $β$-emitters. $^{225}$Ac along with three other $α$-emitting daughter nuclei $^{221}$Fr, $^{217}$At and $^{213}$Po have significant potency for clinical use. Monte carlo simulation has been carried out using MONC code for production routes of $^{225}$Ac for its possible generation using proton accelerators with Thorium-232 and Radium-226 targets. All the calculations has been carried out using global model parameters without adjusting for individual target. The study reveals that proton beam of 20-30MeV energy with 5$μ$A current on radium-226 target can give rise to 1Ci of $^{225}$Ac activity in a week of irradiation. Thorium irradiation at low proton energy produces smaller $^{225}$Ac activity but one can benefit from high current, stable proton accelerators. Proton energy of 100MeV or above with hundreds of $μ$A current can produce reasonable $^{225}$Ac activity for practical use. However, the contamination of other co-produced radio-isotopes is much less at low proton energy hence low energy high current proton accelerators are also viable alternative to generate Actinium-225 radio isotope.

preprint2020arXiv

GeantV: Results from the prototype of concurrent vector particle transport simulation in HEP

Full detector simulation was among the largest CPU consumer in all CERN experiment software stacks for the first two runs of the Large Hadron Collider (LHC). In the early 2010's, the projections were that simulation demands would scale linearly with luminosity increase, compensated only partially by an increase of computing resources. The extension of fast simulation approaches to more use cases, covering a larger fraction of the simulation budget, is only part of the solution due to intrinsic precision limitations. The remainder corresponds to speeding-up the simulation software by several factors, which is out of reach using simple optimizations on the current code base. In this context, the GeantV R&D project was launched, aiming to redesign the legacy particle transport codes in order to make them benefit from fine-grained parallelism features such as vectorization, but also from increased code and data locality. This paper presents extensively the results and achievements of this R&D, as well as the conclusions and lessons learnt from the beta prototype.

preprint2020arXiv

Interstrip Capacitances of the Readout Board used in Large Triple-GEM Detectors for the CMS Muon Upgrade

We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequently maximize the signal-to-noise ratio for the detector. We find agreement at the 1.5--4.8% level between the two methods of calculations and on the average at the 17% level between calculations and measurements. A configuration with halved strip lengths and doubled strip widths results in a measured 27--29% reduction over the original configuration while leaving the total number of strips unchanged. We have now adopted this design modification for all eight module types of the GE2/1 detector and will produce the final detector with this new strip design.

preprint2020arXiv

Status and Scope of MONC Transport Code

$\underline{\textbf{MO}}$nte-carlo $\underline{\textbf{N}}$ucleon transport $\underline{\textbf{C}}$ode (MONC) for nucleon transport is being developed for several years. Constructive Solid Geometry concept is applied with the help of solid bodies. Union, subtraction and intersection Boolean operations are used to construct heterogeneous zones. Scaling, rotation, and translation operation of the basic bodies are allowed to construct more complex zones. Module of repetitive structure for lattice, core calculations in reactor and detector simulation is developed. Graphical User Interface along with visualization tools is developed to make input, construction and display of geometry, and analysis of output data. Low energy neutron transport module is developed using continuous linearly interpolable point neutron cross section data below 20MeV neutron energy. The code is benchmarked for simulation of accelerator driven sub-critical system, neutron shielding, heat and neutron flux distribution and keff of the critical assemblies. It is observed that results of keff are in agreement within $\sim$ 3mk with experimental results of critical assemblies as well as the values obtained from MCNP.

preprint2019arXiv

Technical Design Report for the PANDA Endcap Disc DIRC

PANDA (anti-Proton ANnihiliation at DArmstadt) is planned to be one of the four main experiments at the future international accelerator complex FAIR (Facility for Antiproton and Ion Research) in Darmstadt, Germany. It is going to address fundamental questions of hadron physics and quantum chromodynamics using cooled antiproton beams with a high intensity and and momenta between 1.5 and 15 GeV/c. PANDA is designed to reach a maximum luminosity of 2x10^32 cm^2 s. Most of the physics programs require an excellent particle identification (PID). The PID of hadronic states at the forward endcap of the target spectrometer will be done by a fast and compact Cherenkov detector that uses the detection of internally reflected Cherenkov light (DIRC) principle. It is designed to cover the polar angle range from 5° to 22° and to provide a separation power for the separation of charged pions and kaons up to 3 standard deviations (s.d.) for particle momenta up to 4 GeV/c in order to cover the important particle phase space. This document describes the technical design and the expected performance of the novel PANDA Disc DIRC detector that has not been used in any other high energy physics experiment (HEP) before. The performance has been studied with Monte-Carlo simulations and various beam tests at DESY and CERN. The final design meets all PANDA requirements and guarantees suffcient safety margins.

preprint2016arXiv

Experimental access to Transition Distribution Amplitudes with the PANDA experiment at FAIR

Baryon-to-meson Transition Distribution Amplitudes (TDAs) encoding valuable new information on hadron structure appear as building blocks in the collinear factorized description for several types of hard exclusive reactions. In this paper, we address the possibility of accessing nucleon-to-pion ($πN$) TDAs from $\bar{p}p \to e^+e^- π^0$ reaction with the future PANDA detector at the FAIR facility. At high center of mass energy and high invariant mass squared of the lepton pair $q^2$, the amplitude of the signal channel $\bar{p}p \to e^+e^- π^0$ admits a QCD factorized description in terms of $πN$ TDAs and nucleon Distribution Amplitudes (DAs) in the forward and backward kinematic regimes. Assuming the validity of this factorized description, we perform feasibility studies for measuring $\bar{p}p \to e^+e^- π^0$ with the PANDA detector. Detailed simulations on signal reconstruction efficiency as well as on rejection of the most severe background channel, i.e. $\bar{p}p \to π^+π^- π^0$ were performed for the center of mass energy squared $s = 5$ GeV$^2$ and $s = 10$ GeV$^2$, in the kinematic regions $3.0 < q^2 < 4.3$ GeV$^2$ and $5 < q^2 < 9$ GeV$^2$, respectively, with a neutral pion scattered in the forward or backward cone $| \cosθ_{π^0}| > 0.5 $ in the proton-antiproton center of mass frame. Results of the simulation show that the particle identification capabilities of the PANDA detector will allow to achieve a background rejection factor of $5\cdot 10^7$ ($1\cdot 10^7$) at low (high) $q^2$ for $s=5$ GeV$^2$, and of $1\cdot 10^8$ ($6\cdot 10^6$) at low (high) $q^2$ for $s=10$ GeV$^2$, while keeping the signal reconstruction efficiency at around $40\%$. At both energies, a clean lepton signal can be reconstructed with the expected statistics corresponding to $2$ fb$^{-1}$ of integrated luminosity. (.../...)

preprint2016arXiv

Feasibility studies of time-like proton electromagnetic form factors at PANDA at FAIR

Simulation results for future measurements of electromagnetic proton form factors at \PANDA (FAIR) within the PandaRoot software framework are reported. The statistical precision with which the proton form factors can be determined is estimated. The signal channel $\bar p p \to e^+ e^-$ is studied on the basis of two different but consistent procedures. The suppression of the main background channel, $\textit{i.e.}$ $\bar p p \to π^+ π^-$, is studied. Furthermore, the background versus signal efficiency, statistical and systematical uncertainties on the extracted proton form factors are evaluated using two different procedures. The results are consistent with those of a previous simulation study using an older, simplified framework. However, a slightly better precision is achieved in the PandaRoot study in a large range of momentum transfer, assuming the nominal beam conditions and detector performance.

preprint2015arXiv

Excitation functions of the nat-Ta(p,x)178m2Hf and nat-W(p,x)178m2Hf reactions at energies up to 2600 MeV

Due to potential level of energy intensity 178m2Hf is an extremely interesting isomer. One possible way to produce this isomer is irradiation of nat-Ta or nat-W samples with high energy protons. Irradiation of nat-Ta and nat-W samples performed for other purposes provides an opportunity to study the corresponding reactions. This paper pre-sents the 178m2Hf independent production cross sections for both targets measured by the gamma-ray spectrometry method. The reaction excitation functions have been obtained for the proton energies from 40 up to 2600 MeV. The experimental results were compared with calculations by various versions of the intranuclear cascade model in the well-known codes: ISABEL, Bertini, INCL4.5+ABLA07, PHITS, CASCADE07 and CEM03.02. The isomer ratio for the nat-Ta(p,x)178m2Hf reaction is evaluated on the basis of the available data.

preprint2013arXiv

Excitation Function of the nat-Ta(p,x)178m2-Hf Reaction

178m2-Hf is an extremely interesting isomeric state due to its potential energy capacity level. One possible way to obtain it is by irradiation of a nat-Ta sample with a high-current proton accelerator. Up to now, there was no information in the international experimental nuclear data base (EXFOR) for this reaction. Irradiations of nat-Ta samples performed for other purposes provide an opportunity to address this question. This paper presents the 172m2-Hf independent production cross-sections determined by gamma-ray spectrometry. The nat-Ta(p,x)172m2-Hf excitation function is studied in the 20-3500 MeV energy range. Comparisons with results by several nuclear models (ISABEL, Bertini, INCL4.5+ABLA07, PHITS, CASCADE07, and CEM03.02) used as event-generators in modern transport codes are also reported. However, since such models are generally not able to separately predict ground and isomeric states of reaction products, only 178-Hf independent and cumulative cross-section data are compared.

preprint2011arXiv

Verification of high-energy transport codes on the basis of activation data

Nuclide production cross sections measured at ITEP for the targets of nat-Cr, 56-Fe, nat-Ni, 93-Nb, 181-Ta, nat-W, nat-Pb, 209-Bi irradiated by protons with energies from 40 to 2600 MeV were used to estimate the predictive accuracy of several popular high-energy transport codes. A general agreement of the ITEP data with the data obtained by other groups, including the numerous GSI data measured by the inverse kinematics method was found. Simulations of the measured data were performed with the MCNPX (Bertini and ISABEL options), CEM03.02, INCL4.2+ABLA, INCL4.5+ABLA07, PHITS, and CASCADE.07 codes. Deviation factors between the calculated and experimental cross sections have been estimated for each target and for the whole energy range covered by our measurements. Two-dimensional diagrams of deviation factor values were produced for estimating the predictive power of every code for intermediate, not measured masses of nuclei-targets and bombarding energies of protons. Further improvements of all tested here codes are recommended. In addition, new measurements at ITEP of nuclide yields from a 208-Pb target irradiated by 500 MeV protons are presented. A good agreement between these new data and the GSI measurements obtained by the inverse kinematics method was found