Outdoor Characterization of Solar Cells with Micro-structured Anti-Reflective Coating in a Concentrator Photovoltaic Module
Micro-structured anti reflective coatings (ARC) have been identified as a promising solution to reduce optical losses in Concentrator Photovoltaics modules (CPV). We fabricated and tested in field a CPV modules made of 4 sub-modules with a concentration factor of 250x, that embed either solar cells with micro-structured encapsulating ARC or solar cells with multilayer ARC as a reference. The micro-structured encapsulating ARC was made of semi-buried silica beads in polydimethylsiloxane (PDMS). The module was in operation for 1 year in the severe climatic conditions of Sherbrooke, Quebec, Canada, before extracting the sub-modules performance under Concentrator Standard Operating Condition (CSOC). An acceptance angle of +/-0.78 degree was determined for all sub-modules, demonstrating that improving angular collection at the cell level has no significant impact on the angle of acceptance at the module level. We report an increase of 12 to 14% of the short-circuit current and of 15 to 19% of maximum power at CSOC for solar cells with a micro structured encapsulating ARC compared to the reference. Despite a sub-optimal module design, we report a sub-module efficiency of 29.7% at CSOC for a cell with micro-structured encapsulating ARC. This proves the potential of micro-structured encapsulating ARC to improve CPV system performance and shows promise of reliability for sumi-buried microbeads in PDMS as encapsulating ARC.