Catalog footprint

What is connected

55works
43topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

55 published item(s)

preprint2026arXiv

Topological phase transition induced by modulating unit cells in photonic Lieb lattice

Topological photonics was embarked from realizing the first-order chiral state in gyromagnetic media, but its higher-order states were mostly studied in dielectric lattice instead. In this paper we theoretically unveil a hierarchy of topological phases under broken time-reversal symmetry, which include the first-order Chern, and the second-order dipole, quadrupole phases. Concretely, by relaxing a certain spatial symmetry of unit cell, versatile topological phases including both edge and corner states can be established to transit around, with bandgap closures marking the phase boundaries. Our results on gyromagnetic photonic crystals may broaden the scope of sublattice engineering design for topological phase manipulation, potentially enabling multifunctional disorder-resistant waveguides and integrated photonic circuits for information communication.

preprint2025arXiv

Ultrahigh-Energy Gamma-ray Emission Associated with Black Hole-Jet Systems

Black holes (BH), one of the most intriguing objects in the universe, can manifest themselves through electromagnetic radiation initiated by the accretion flow. Some stellar-mass BHs drive relativistic jets when accreting matter from their companion stars, forming microquasars. Non-thermal emission from the radio to tera-electronvolt (TeV) gamma-ray band has been observed from microquasars, indicating the acceleration of relativistic particles. Here we report detection of four microquasars (SS 433, V4641 Sgr, GRS 1915+105, MAXI J1820+070) of spectrum extending to the ultrahigh-energy (UHE; photon energy $E>100$ TeV) band and one microquasar (Cygnus X-1) of spectrum approaching 100 TeV, using the Large High Altitude Air Shower Observatory (LHAASO). Notably, the total emission associated with SS 433 cannot be interpreted with a single leptonic component. In the UHE band, its emission is in spatial coincidence with a giant atomic cloud, which is consistent with a hadronic origin. An elongated source is discovered from V4641 Sgr with the spectrum continuing up to 800 TeV. The detection of UHE gamma rays demonstrates that accreting BHs and their environments can operate as extremely efficient accelerators of particles out of 1 peta-electronvolt (PeV), suggesting microquasars to be important contributors to Galactic cosmic rays especially around the `knee' region.

preprint2024arXiv

Automated calculation of Jet fragmentation at NLO in QCD

We present FMNLO, a framework to combine general-purpose Monte Carlo generators and fragmentation functions (FFs). It is based on a hybrid scheme of phase-space slicing method and local subtraction method, and accurate to next-to-leading order (NLO) in QCD. The new framework has been interfaced to MG5 aMC@NLO and made publicly available in this work. We demonstrate its unique ability by giving theoretical predictions of various fragmentation measurements at the LHC, followed by comparison with the data. With the help of interpolation techniques, FMNLO allows for fast calculation of fragmentation processes for a large number of different FFs, which makes it a promising tool for future fits of FFs. As an example, we perform a NLO fit of parton fragmentation functions to unidentified charged hadrons using measurements at the LHC. We find the ATLAS data from inclusive dijet production show a strong constraining power. Notable disparities are found between our gluon FF and that of BKK, DSS and NNFF, indicating the necessities of additional constraints and data for gluon fragmentation function.

preprint2024arXiv

High-Efficiency Resonant Beam Charging and Communication

With the development of Internet of Things (IoT), demands of power and data for IoT devices increase drastically. In order to resolve the supply-demand contradiction, simultaneous wireless information and power transfer (SWIPT) has been envisioned as an enabling technology by providing high-power energy transfer and high-rate data delivering concurrently. In this paper, we introduce a high-efficiency resonant beam (RB) charging and communication scheme. The scheme utilizes the semiconductor materials as gain medium, which has a better energy absorption capacity compared with the traditional solid-state one. Moreover, the telescope internal modulator (TIM) are adopted in the scheme which can concentrate beams to match the gain size, reducing the transmission loss. To evaluate the scheme SWIPT performance, we establish an analytical model and study the influence factors of its beam transmission, energy conversion, output power, and spectral efficiency. Numerical results shows that the proposed RB system can realize 16 W electric power output with 11 % end-to-end conversion efficiency, and support 18 bit/s/Hz spectral efficiency for communication.

preprint2023arXiv

Magnon corner states in twisted bilayer honeycomb magnets

Search for higher-order topological insulators, characterized by topologically protected gapless boundary states of codimension higher than one, in bosonic systems has attracted growing interest. Here, we establish twisted bilayer honeycomb magnets as a new platform for hosting second-order topological magnon insulators (SOTMIs) without fine-tuning. We employ a simple, minimal Heisenberg spin model to describe misaligned bilayer sheets of honeycomb ferromagnetic magnets with a large commensurate twist angle. We found that the higher-order topology in this bilayer system shows a significant dependence on the interlayer exchange coupling. The SOTMI, featuring topologically protected magnon corner states, appears for ferromagnetic interlayer couplings, while the twisted bilayer exhibits a nodal phase in the case of antiferromagnetic interlayer coupling.

preprint2023arXiv

Periodically driven four-dimensional topological insulator with tunable second Chern number

In recent years, Floquet engineering has attracted considerable attention as a promising approach for tuning topological phase transitions. In this work, we investigate the effects of high-frequency time-periodic driving in a four-dimensional (4D) topological insulator, focusing on topological phase transitions at the off-resonant quasienergy gap. The 4D topological insulator hosts gapless three-dimensional boundary states characterized by the second Chern number $C_{2}$. We demonstrate that the second Chern number of 4D topological insulators can be modulated by tuning the amplitude of time-periodic driving. This includes transitions from a topological phase with $C_{2}=\pm3$ to another topological phase with $C_{2}=\pm1$, or to a topological phase with an even second Chern number $C_{2}=\pm2$ which is absent in the 4D static system. Finally, the approximation theory in the high-frequency limit further confirms the numerical conclusions.

preprint2022arXiv

A novel time delay estimation algorithm of acoustic pyrometry for furnace

Acoustic pyrometry is a non-contact measurement technology for monitoring furnace combustion reaction, diagnosing energy loss due to incomplete combustion and ensuring safe production. The accuracy of time of flight (TOF) estimation of an acoustic pyrometry directly affects the authenticity of furnace temperature measurement. In this paper presented is a novel TOF (i.e. time delay) estimation algorithm based on digital lock-in filtering (DLF) algorithm. In this research, the time-frequency relationship between the first harmonic of the acoustic signal and the moment of characteristic frequency applied is established through the digital lock-in and low-pass filtering techniques. The accurate estimation of TOF is obtained by extracting and comparing the temporal relationship of the characteristic frequency occurrence between received and source acoustic signals. The computational error analysis indicates that the accuracy of the proposed algorithm is better than that of the classical generalized cross-correlation (GCC) algorithm, and the computational effort is significantly reduced to half of that the GCC can offer. It can be confirmed that with this method, the temperature measurement in furnaces can be improved in terms of computational effort and accuracy, which are vital parameters in furnace combustion control. It provides a new idea of time delay estimation with the utilization of acoustic pyrometry for furnace.

preprint2022arXiv

Aesthetics Driven Autonomous Time-Lapse Photography Generation by Virtual and Real Robots

Time-lapse photography is employed in movies and promotional films because it can reflect the passage of time in a short time and strengthen the visual attraction. However, since it takes a long time and requires the stable shooting, it is a great challenge for the photographer. In this article, we propose a time-lapse photography system with virtual and real robots. To help users shoot time-lapse videos efficiently, we first parameterize the time-lapse photography and propose a parameter optimization method. For different parameters, different aesthetic models, including image and video aesthetic quality assessment networks, are used to generate optimal parameters. Then we propose a time-lapse photography interface to facilitate users to view and adjust parameters and use virtual robots to conduct virtual photography in a three-dimensional scene. The system can also export the parameters and provide them to real robots so that the time-lapse videos can be filmed in the real world. In addition, we propose a time-lapse photography aesthetic assessment method that can automatically evaluate the aesthetic quality of time-lapse video. The experimental results show that our method can efficiently obtain the time-lapse videos. We also conduct a user study. The results show that our system has the similar effect as professional photographers and is more efficient.

preprint2022arXiv

Autofocus for Event Cameras

Focus control (FC) is crucial for cameras to capture sharp images in challenging real-world scenarios. The autofocus (AF) facilitates the FC by automatically adjusting the focus settings. However, due to the lack of effective AF methods for the recently introduced event cameras, their FC still relies on naive AF like manual focus adjustments, leading to poor adaptation in challenging real-world conditions. In particular, the inherent differences between event and frame data in terms of sensing modality, noise, temporal resolutions, etc., bring many challenges in designing an effective AF method for event cameras. To address these challenges, we develop a novel event-based autofocus framework consisting of an event-specific focus measure called event rate (ER) and a robust search strategy called event-based golden search (EGS). To verify the performance of our method, we have collected an event-based autofocus dataset (EAD) containing well-synchronized frames, events, and focal positions in a wide variety of challenging scenes with severe lighting and motion conditions. The experiments on this dataset and additional real-world scenarios demonstrated the superiority of our method over state-of-the-art approaches in terms of efficiency and accuracy.

preprint2022arXiv

Chern insulator in a hyperbolic lattice

Motivated by the recent experimental realizations of hyperbolic lattices in circuit quantum electrodynamics and the research interest in the non-Euclidean generalization of topological phenomena, we investigate the Chern insulator phases in a hyperbolic $\{8,3\}$ lattice, which is made from regular octagons ($8$-gons) such that the coordination number of each lattice site is $3$. Based on the conformal projection of the hyperbolic lattice into the Euclidean plane, i.e., the Poincaré disk model, by calculating the Bott index ($B$) and the two-terminal conductance, we reveal two Chern insulator phases (with $B=1$ and $B=-1$, respectively) accompanied with quantized conductance plateaus in the hyperbolic $\{8,3\}$ lattice. The numerical calculation results of the nonequilibrium local current distribution further confirm that the quantized conductance plateau originates from the chiral edge states and the two Chern insulator phases exhibit opposite chirality. Moreover, we explore the effect of disorder on topological phases in the hyperbolic lattice. It is demonstrated that the chiral edge states of Chern insulators are robust against weak disorder in the hyperbolic lattice. More fascinating is the discovery of disorder-induced topological non-trivial phases exhibiting chiral edge states in the hyperbolic lattice, realizing a non-Euclidean analog of topological Anderson insulator. Our work provides a route for the exploration of topological non-trivial states in hyperbolic geometric systems.

preprint2022arXiv

EpiGNN: Exploring Spatial Transmission with Graph Neural Network for Regional Epidemic Forecasting

Epidemic forecasting is the key to effective control of epidemic transmission and helps the world mitigate the crisis that threatens public health. To better understand the transmission and evolution of epidemics, we propose EpiGNN, a graph neural network-based model for epidemic forecasting. Specifically, we design a transmission risk encoding module to characterize local and global spatial effects of regions in epidemic processes and incorporate them into the model. Meanwhile, we develop a Region-Aware Graph Learner (RAGL) that takes transmission risk, geographical dependencies, and temporal information into account to better explore spatial-temporal dependencies and makes regions aware of related regions' epidemic situations. The RAGL can also combine with external resources, such as human mobility, to further improve prediction performance. Comprehensive experiments on five real-world epidemic-related datasets (including influenza and COVID-19) demonstrate the effectiveness of our proposed method and show that EpiGNN outperforms state-of-the-art baselines by 9.48% in RMSE.

preprint2022arXiv

Exploration of the computational model and the focusing process with a Flat Multi-channel Plate and a Curved Multi-channel Plate in the MATLAB

By simulating the X-ray paths and the Chapman Model of a flat multi-channel plate and a curved multi-channel plate in the MATLAB, the field of view, local reflection efficiency, spherical aberration, point-spread function, collection efficiency of incident X-ray and peak-to-background ratio on the focal plane of the two devices were compared. At the same time, the advantages and disadvantages of the flat multi-channel plate and the curved multi-channel plate were compared.

preprint2022arXiv

Inter- and Intra-Series Embeddings Fusion Network for Epidemiological Forecasting

The accurate forecasting of infectious epidemic diseases is the key to effective control of the epidemic situation in a region. Most existing methods ignore potential dynamic dependencies between regions or the importance of temporal dependencies and inter-dependencies between regions for prediction. In this paper, we propose an Inter- and Intra-Series Embeddings Fusion Network (SEFNet) to improve epidemic prediction performance. SEFNet consists of two parallel modules, named Inter-Series Embedding Module and Intra-Series Embedding Module. In Inter-Series Embedding Module, a multi-scale unified convolution component called Region-Aware Convolution is proposed, which cooperates with self-attention to capture dynamic dependencies between time series obtained from multiple regions. The Intra-Series Embedding Module uses Long Short-Term Memory to capture temporal relationships within each time series. Subsequently, we learn the influence degree of two embeddings and fuse them with the parametric-matrix fusion method. To further improve the robustness, SEFNet also integrates a traditional autoregressive component in parallel with nonlinear neural networks. Experiments on four real-world epidemic-related datasets show SEFNet is effective and outperforms state-of-the-art baselines.

preprint2022arXiv

Interior estimates for Monge-Ampère type fourth order equations

In this paper, we give several new approaches to study interior estimates for a class of fourth order equations of Monge-Ampère type. First, we prove interior estimates for the homogeneous equation in dimension two by using the partial Legendre transform. As an application, we obtain a new proof of the Bernstein theorem without using Caffarelli-Gutiérrez's estimate, including the Chern conjecture on affine maximal surfaces. For the inhomogeneous equation, we also obtain a new proof in dimension two by an integral method relying on the Monge-Ampère Sobolev inequality. This proof works even when the right hand side is singular. In higher dimensions, we obtain the interior regularity in terms of integral bounds on the second derivatives and the inverse of the determinant.

preprint2022arXiv

K-stability and polystable degenerations of polarized spherical varieties

In this paper, we study the K-stability of polarized spherical varieties. After reduction, it can be treated as a variational problem of the reduced functional of the Futaki invariant on the associated moment polytope. With the convexity constraint of the problem, the minimizers are shown to satisfy the homogeneous Monge-Ampère equation (HMA). When the spherical variety has rank two, a simpler characterization can be established through properties of the HMA. As an application, we determine the strict semistability and polystable degenerations for Fano spherical varieties of rank two.

preprint2022arXiv

Learning Fine-Grained Segmentation of 3D Shapes without Part Labels

Learning-based 3D shape segmentation is usually formulated as a semantic labeling problem, assuming that all parts of training shapes are annotated with a given set of tags. This assumption, however, is impractical for learning fine-grained segmentation. Although most off-the-shelf CAD models are, by construction, composed of fine-grained parts, they usually miss semantic tags and labeling those fine-grained parts is extremely tedious. We approach the problem with deep clustering, where the key idea is to learn part priors from a shape dataset with fine-grained segmentation but no part labels. Given point sampled 3D shapes, we model the clustering priors of points with a similarity matrix and achieve part segmentation through minimizing a novel low rank loss. To handle highly densely sampled point sets, we adopt a divide-and-conquer strategy. We partition the large point set into a number of blocks. Each block is segmented using a deep-clustering-based part prior network trained in a category-agnostic manner. We then train a graph convolution network to merge the segments of all blocks to form the final segmentation result. Our method is evaluated with a challenging benchmark of fine-grained segmentation, showing state-of-the-art performance.

preprint2022arXiv

Learning Semantic Abstraction of Shape via 3D Region of Interest

In this paper, we focus on the two tasks of 3D shape abstraction and semantic analysis. This is in contrast to current methods, which focus solely on either 3D shape abstraction or semantic analysis. In addition, previous methods have had difficulty producing instance-level semantic results, which has limited their application. We present a novel method for the joint estimation of a 3D shape abstraction and semantic analysis. Our approach first generates a number of 3D semantic candidate regions for a 3D shape; we then employ these candidates to directly predict the semantic categories and refine the parameters of the candidate regions simultaneously using a deep convolutional neural network. Finally, we design an algorithm to fuse the predicted results and obtain the final semantic abstraction, which is shown to be an improvement over a standard non maximum suppression. Experimental results demonstrate that our approach can produce state-of-the-art results. Moreover, we also find that our results can be easily applied to instance-level semantic part segmentation and shape matching.

preprint2022arXiv

Mixed QCD-EW corrections for Higgs leptonic decay via $HW^+W^-$ vertex

We consider the two-loop corrections to the $HW^+W^-$ vertex at order $αα_s$. We construct a canonical basis for the two-loop integrals using the Baikov representation and the intersection theory. By solving the $ε$-form differential equations, we obtain fully analytic expressions for the master integrals in terms of multiple polylogarithms, which allow fast and accurate numeric evaluation for arbitrary configurations of external momenta. We apply our analytic results to the decay process $H \to ν_e e W$, and study both the integrated and differential decay rates. Our results can also be applied to the Higgs production process via $W$ boson fusion.

preprint2022arXiv

Multi-scale Anomaly Detection for Big Time Series of Industrial Sensors

Given a multivariate big time series, can we detect anomalies as soon as they occur? Many existing works detect anomalies by learning how much a time series deviates away from what it should be in the reconstruction framework. However, most models have to cut the big time series into small pieces empirically since optimization algorithms cannot afford such a long series. The question is raised: do such cuts pollute the inherent semantic segments, like incorrect punctuation in sentences? Therefore, we propose a reconstruction-based anomaly detection method, MissGAN, iteratively learning to decode and encode naturally smooth time series in coarse segments, and finding out a finer segment from low-dimensional representations based on HMM. As a result, learning from multi-scale segments, MissGAN can reconstruct a meaningful and robust time series, with the help of adversarial regularization and extra conditional states. MissGAN does not need labels or only needs labels of normal instances, making it widely applicable. Experiments on industrial datasets of real water network sensors show our MissGAN outperforms the baselines with scalability. Besides, we use a case study on the CMU Motion dataset to demonstrate that our model can well distinguish unexpected gestures from a given conditional motion.

preprint2022arXiv

Recent neutron focusing experiments using polycapillary lens in CSNS

Higher neutron current densities can provide convenience for neutron experiments. Using neutron optical focusing elements, large flux beams transported to sample can be achieved. As one kind of focusing elements, polycapillary lens is very suitable for neutron absorption experiments such as PGAA and NDP technology. At present, a Neutron Physics and Application Spectrometer was in construction in CSNS, which is the first pulsed neutron source in China. To provide some suggestions and ideas for the following design of enhanced PGAA or NDP instrument with polycapillary lens in CSNS, a first neutron focusing experiment using polycapillary lens in CSNS was conducted. For 0.5-12.6 polychromatic beam, a focal spot with FWHM of 800 was obtained. As the value of wavelength increased, the beam size, transmission efficiency and gain increased. For cold neutron, the gain maintained in a level of 7.

preprint2022arXiv

Theoretical Simulation and Experiment Investigation of X-ray transmission characteristics though Square Polycapillary Slice Lens with quadratic curve

The x-ray polycapillary lens is an optical device with good optic performance. Similar to the traditional X-ray polycapillary lens, square polycapillary slice lens was regulated on X-ray based on the full reflection principle of X-ray in the capillaries surfaces. According to its geometrical structure model and the X-ray tracing principle, a set of X-ray transmission procedures was established. A complete square polycapillary slice lens with quadratic curve was produced and the optical performance was tested

preprint2022arXiv

Trace Inequalities, isocapacitary inequalities and regularity of the complex Hessian equations

In this paper, we study the relations between trace inequalities(Sobolev and Moser-Trudinger type), isocapacitary inequalities and the regularity of the complex Hessian and Monge-Ampère equations with respect to a general positive Borel measure. We obtain a quantitative characterization for these relations through properties of the capacity minimizing functions.

preprint2021arXiv

Fine-Grained Vehicle Perception via 3D Part-Guided Visual Data Augmentation

Holistically understanding an object and its 3D movable parts through visual perception models is essential for enabling an autonomous agent to interact with the world. For autonomous driving, the dynamics and states of vehicle parts such as doors, the trunk, and the bonnet can provide meaningful semantic information and interaction states, which are essential to ensuring the safety of the self-driving vehicle. Existing visual perception models mainly focus on coarse parsing such as object bounding box detection or pose estimation and rarely tackle these situations. In this paper, we address this important autonomous driving problem by solving three critical issues. First, to deal with data scarcity, we propose an effective training data generation process by fitting a 3D car model with dynamic parts to vehicles in real images before reconstructing human-vehicle interaction (VHI) scenarios. Our approach is fully automatic without any human interaction, which can generate a large number of vehicles in uncommon states (VUS) for training deep neural networks (DNNs). Second, to perform fine-grained vehicle perception, we present a multi-task network for VUS parsing and a multi-stream network for VHI parsing. Third, to quantitatively evaluate the effectiveness of our data augmentation approach, we build the first VUS dataset in real traffic scenarios (e.g., getting on/out or placing/removing luggage). Experimental results show that our approach advances other baseline methods in 2D detection and instance segmentation by a big margin (over 8%). In addition, our network yields large improvements in discovering and understanding these uncommon cases. Moreover, we have released the source code, the dataset, and the trained model on Github (https://github.com/zongdai/EditingForDNN).

preprint2021arXiv

Hybrid Interference Mitigation Using Analog Prewhitening

This paper proposes a novel scheme for mitigating strong interferences, which is applicable to various wireless scenarios, including full-duplex wireless communications and uncoordinated heterogenous networks. As strong interferences can saturate the receiver's analog-to-digital converters (ADC), they need to be mitigated both before and after the ADCs, i.e., via hybrid processing. The key idea of the proposed scheme, namely the Hybrid Interference Mitigation using Analog Prewhitening (HIMAP), is to insert an M-input M-output analog phase shifter network (PSN) between the receive antennas and the ADCs to spatially prewhiten the interferences, which requires no signal information but only an estimate of the covariance matrix. After interference mitigation by the PSN prewhitener, the preamble can be synchronized, the signal channel response can be estimated, and thus a minimum mean squared error (MMSE) beamformer can be applied in the digital domain to further mitigate the residual interferences. The simulation results verify that the HIMAP scheme can suppress interferences 80dB stronger than the signal by using off-the-shelf phase shifters (PS) of 6-bit resolution.

preprint2021arXiv

Self-Supervised Learning of Part Mobility from Point Cloud Sequence

Part mobility analysis is a significant aspect required to achieve a functional understanding of 3D objects. It would be natural to obtain part mobility from the continuous part motion of 3D objects. In this study, we introduce a self-supervised method for segmenting motion parts and predicting their motion attributes from a point cloud sequence representing a dynamic object. To sufficiently utilize spatiotemporal information from the point cloud sequence, we generate trajectories by using correlations among successive frames of the sequence instead of directly processing the point clouds. We propose a novel neural network architecture called PointRNN to learn feature representations of trajectories along with their part rigid motions. We evaluate our method on various tasks including motion part segmentation, motion axis prediction and motion range estimation. The results demonstrate that our method outperforms previous techniques on both synthetic and real datasets. Moreover, our method has the ability to generalize to new and unseen objects. It is important to emphasize that it is not required to know any prior shape structure, prior shape category information, or shape orientation. To the best of our knowledge, this is the first study on deep learning to extract part mobility from point cloud sequence of a dynamic object.

preprint2021arXiv

Topological Anderson insulators in an Ammann-Beenker quasicrystal and a snub-square crystal

The quest for the topological phases of matter in an aperiodic system has been greatly developed recently. Here we investigate the effects of disorder on topological phases of a two-dimensional Ammann-Beenker tiling quasicrystalline lattice. For comparison purposes, we also consider the case of a periodic snub-square crystalline lattice, which has the same primitive tiles as the Ammann-Beenker tiling quasicrystalline lattice. By calculating the spin Bott index and the two-terminal conductance, we confirm that the topological phases with disorder share the similar properties in the two systems which possess different symmetry and periodicity. It is shown that the quantum spin Hall states are robust against weak disorder in both the quasicrystalline lattice and the crystalline lattice. More interesting is that topological Anderson insulator phases induced by disorder appear in the two systems. Furthermore, the quantized conductance plateau contributed by the topological Anderson insulator phase is verified by the distribution of local currents.

preprint2020arXiv

A Multi-View Approach Based on Naming Behavioral Modeling for Aligning Chinese User Accounts across Multiple Networks

Hundreds of millions of Chinese people have become social network users in recent years, and aligning the accounts of common Chinese users across multiple social networks is valuable to many inter-network applications, e.g., cross-network recommendation, cross-network link prediction. Many methods have explored the proper ways of utilizing account name information into aligning the common English users' accounts. However, how to properly utilize the account name information when aligning the Chinese user accounts remains to be detailedly studied. In this paper, we firstly discuss the available naming behavioral models as well as the related features for different types of Chinese account name matchings. Secondly, we propose the framework of Multi-View Cross-Network User Alignment (MCUA) method, which uses a multi-view framework to creatively integrate different models to deal with different types of Chinese account name matchings, and can consider all of the studied features when aligning the Chinese user accounts. Finally, we conduct experiments to prove that MCUA can outperform many existing methods on aligning Chinese user accounts between Sina Weibo and Twitter. Besides, we also study the best learning models and the top-k valuable features of different types of name matchings for MCUA over our experimental data sets.

preprint2020arXiv

How Far are We from Effective Context Modeling? An Exploratory Study on Semantic Parsing in Context

Recently semantic parsing in context has received considerable attention, which is challenging since there are complex contextual phenomena. Previous works verified their proposed methods in limited scenarios, which motivates us to conduct an exploratory study on context modeling methods under real-world semantic parsing in context. We present a grammar-based decoding semantic parser and adapt typical context modeling methods on top of it. We evaluate 13 context modeling methods on two large complex cross-domain datasets, and our best model achieves state-of-the-art performances on both datasets with significant improvements. Furthermore, we summarize the most frequent contextual phenomena, with a fine-grained analysis on representative models, which may shed light on potential research directions. Our code is available at https://github.com/microsoft/ContextualSP.

preprint2020arXiv

PerMO: Perceiving More at Once from a Single Image for Autonomous Driving

We present a novel approach to detect, segment, and reconstruct complete textured 3D models of vehicles from a single image for autonomous driving. Our approach combines the strengths of deep learning and the elegance of traditional techniques from part-based deformable model representation to produce high-quality 3D models in the presence of severe occlusions. We present a new part-based deformable vehicle model that is used for instance segmentation and automatically generate a dataset that contains dense correspondences between 2D images and 3D models. We also present a novel end-to-end deep neural network to predict dense 2D/3D mapping and highlight its benefits. Based on the dense mapping, we are able to compute precise 6-DoF poses and 3D reconstruction results at almost interactive rates on a commodity GPU. We have integrated these algorithms with an autonomous driving system. In practice, our method outperforms the state-of-the-art methods for all major vehicle parsing tasks: 2D instance segmentation by 4.4 points (mAP), 6-DoF pose estimation by 9.11 points, and 3D detection by 1.37. Moreover, we have released all of the source code, dataset, and the trained model on Github.

preprint2020arXiv

Relative Entropy Regularised TDLAS Tomography for Robust Temperature Imaging

Tunable Diode Laser Absorption Spectroscopy (TDLAS) tomography has been widely used for in situ combustion diagnostics, yielding images of both species concentration and temperature. The temperature image is generally obtained from the reconstructed absorbance distributions for two spectral transitions, i.e. two-line thermometry. However, the inherently ill-posed nature of tomographic data inversion leads to noise in each of the reconstructed absorbance distributions. These noise effects propagate into the absorbance ratio and generate artefacts in the retrieved temperature image. To address this problem, we have developed a novel algorithm, which we call Relative Entropy Tomographic RecOnstruction (RETRO), for TDLAS tomography. A relative entropy regularisation is introduced for high-fidelity temperature image retrieval from jointly reconstructed two-line absorbance distributions. We have carried out numerical simulations and proof-of-concept experiments to validate the proposed algorithm. Compared with the well-established Simultaneous Algebraic Reconstruction Technique (SART), the RETRO algorithm significantly improves the quality of the tomographic temperature images, exhibiting excellent robustness against TDLAS tomographic measurement noise. RETRO offers great potential for industrial field applications of TDLAS tomography, where it is common for measurements to be performed in very harsh environments.

preprint2020arXiv

Ultra-slow sound in non-resonant meta-aerogel

The manipulation of sound with acoustic metamaterials is a field of intense research, where interaction via resonance is a common application despite the significant disadvantages. We propose a novel procedure for introducing well-designed coupling interfaces with a cell size of less than 10 nm into an ultra-soft porous medium, to prepare a meta-aerogel, where the sound propagation is significantly delayed in a non-resonant mode. The resultant sound velocity is shown as a scaling law with the mass density and the mass fraction ratio of the components, in accordance with our analytical model. We have prepared a meta-aerogel with the slowest sound velocity of 62 m/s. To the best of our knowledge, this is the lowest value in compact solid materials, with a prospect of further slowing down by our procedure. The development of such meta-aerogels can facilitate key applications in acoustic metamaterials intended to employ non-resonant type slow sound (or phase delay). Examples of the latter include deep subwavelength meta-surface and other focused imaging or transformation acoustics that require a high contrast of sound velocity.

preprint2020arXiv

You Impress Me: Dialogue Generation via Mutual Persona Perception

Despite the continuing efforts to improve the engagingness and consistency of chit-chat dialogue systems, the majority of current work simply focus on mimicking human-like responses, leaving understudied the aspects of modeling understanding between interlocutors. The research in cognitive science, instead, suggests that understanding is an essential signal for a high-quality chit-chat conversation. Motivated by this, we propose P^2 Bot, a transmitter-receiver based framework with the aim of explicitly modeling understanding. Specifically, P^2 Bot incorporates mutual persona perception to enhance the quality of personalized dialogue generation. Experiments on a large public dataset, Persona-Chat, demonstrate the effectiveness of our approach, with a considerable boost over the state-of-the-art baselines across both automatic metrics and human evaluations.

preprint2019arXiv

Higher-Order Topological Insulators in Quasicrystals

Current understanding of higher-order topological insulators (HOTIs) is based primarily on crystalline materials. Here, we propose that HOTIs can be realized in quasicrystals. Specifically, we show that two distinct types of second-order topological insulators (SOTIs) can be constructed on the quasicrystalline lattices (QLs) with different tiling patterns. One is derived by using a Wilson mass term to gap out the edge states of the quantum spin Hall insulator on QLs. The other is the quasicrystalline quadrupole insulator (QI) with a quantized quadrupole moment. We reveal some unusual features of the corner states (CSs) in the quasicrystalline SOTIs. We also show that the quasicrystalline QI can be simulated by a designed electrical circuit, where the CSs can be identified by measuring the impedance resonance peak. Our findings not only extend the concept of HOTIs into quasicrystals but also provide a feasible way to detect the topological property of quasicrystals in experiments.

preprint2017arXiv

K-energy on polarized compactifications of Lie groups

In this paper, we study Mabuchi's K-energy on a compactification M of a reductive Lie group G, which is a complexification of its maximal compact subgroup K. We give a criterion for the properness of K-energy on the space of K \times K-invariant Kahler potentials. In particular, it turns to give an alternative proof of Delcroix's theorem for the existence of Kahler-Einstein metrics in case of Fano manifolds M . We also study the existence of minimizers of K-energy for general Kahler classes of M.

preprint2016arXiv

Improved Razumikhin and Krasovskii Stability Criteria for Time-Varying Stochastic Time-Delay Systems

The problem of p-th moment stability for time-varying stochastic time-delay systems with Markovian switching is investigated in this paper. Some novel stability criteria are obtained by applying the generalized Razumikhin and Krasovskii stability theorems. Both p-th moment asymptotic stability and (integral) input-to-state stability are considered based on the notion and properties of uniformly stable functions and the improved comparison principles. The established results show that time-derivatives of the constructed Razumikhin functions and Krasovskii functionals are allowed to be indefinite, which improve the existing results on this topic. By applying the obtained results for stochastic systems, we also analyze briefly the stability of time-varying deterministic time-delay systems. Finally, examples are provided to illustrate the effectiveness of the proposed results.

preprint2015arXiv

Bidirectional selection between two classes in complex social networks

The bidirectional selection between two classes widely emerges in various social lives, such as commercial trading and mate choosing. Until now, the discussions on bidirectional selection in structured human society are quite limited. We demonstrated theoretically that the rate of successfully matching is affected greatly by individuals neighborhoods in social networks, regardless of the type of networks. Furthermore, it is found that the high average degree of networks contributes to increasing rates of successful matches. The matching performance in different types of networks has been quantitatively investigated, revealing that the small-world networks reinforces the matching rate more than scale-free networks at given average degree. In addition, our analysis is consistent with the modeling result, which provides the theoretical understanding of underlying mechanisms of matching in complex networks.

preprint2015arXiv

On Stability of the Linearized Spacecraft Attitude Control System

This note is concerned with the stability and stabilization of the linearized spacecraft attitude control system. Necessary and sufficient conditions are respectively provided to guarantee that the considered systems are polynomially stable and stable in the Lyapunov sense. These two classes of conditions guarantee that the linearized spacecraft attitude control system can be respectively stabilized semi-globally and globally by saturated linear state feedback.

preprint2015arXiv

Stability Analysis of Integral Delay Systems with Multiple Delays

This note is concerned with stability analysis of integral delay systems with multiple delays. To study this problem, the well-known Jensen inequality is generalized to the case of multiple terms by introducing an individual slack weighting matrix for each term, which can be optimized to reduce the conservatism. With the help of the multiple Jensen inequalities and by developing a novel linearizing technique, two novel Lyapunov functional based approaches are established to obtain sufficient stability conditions expressed by linear matrix inequalities (LMIs). It is shown that these new conditions are always less conservative than the existing ones. Moreover, by the positive operator theory, a single LMI based condition and a spectral radius based condition are obtained based on an existing sufficient stability condition expressed by coupled LMIs. A numerical example illustrates the effectiveness of the proposed approaches.

preprint2014arXiv

Degree-layer theory of network topology

The network topology can be described by the number of nodes and the interconnections among them. The degree of a node in a network is the number of connections it has to other nodes and the degree distribution is the probability distribution of these degrees over the whole network. Therefore, the degree is very important structural parameter of network topology. However, given the number of nodes and the degree of each node in a network, the topology of the network cannot be determined. Therefore, we propose the degree-layer theory of network topology to describe deeply the network topology. First, we propose the concept of degree-tree with the breadth-first search tree. The degrees of all nodes are layered and have a hierarchical structure. Second,the degree-layer theory is described in detail. Two new concepts are defined in the theory. An index is proposed to quantitatively distinguish the two network topologies. It also can quantitatively measure the stability of network topology built by a model mechanism. One theorem is given and proved, furthermore, and one corollary is derived directly from the theorem. Third, the applications of the degree-layer theory are discussed in the ER random network, WS small world network and BA scale-free network, and the influences of the degree distribution on the stability of network topology are studied in the three networks. In conclusion, the degree-layer theory is helpful for accurately describing the network topology, and provides a new starting point for researching the similarity and isomorphism between two network topologies.

preprint2014arXiv

Hybrid evolving clique-networks and their communicability

Aiming to understand real-world hierarchical networks whose degree distributions are neither power law nor exponential, we construct a hybrid clique network that includes both homogeneous and inhomogeneous parts, and introduce an inhomogeneity parameter to tune the ratio between the homogeneous part and the inhomogeneous one. We perform Monte-Carlo simulations to study various properties of such a network, including the degree distribution, the average shortest-path-length, the clustering coefficient, the clustering spectrum, and the communicability.

preprint2014arXiv

Modified Futaki invariant and equivariant Riemann-Roch formula

In this paper, we give a new version of the modified Futaki invariant for a test configuration associated to the soliton action on a Fano manifold. Our version will naturally come from toric test configurations defined by Donaldson for toric manifolds. As an application, we show that the modified $K$-energy is proper for toric invariant Kähler potentials on a toric Fano manifold.

preprint2014arXiv

Stabilization and Consensus of Linear Systems with Multiple Input Delays by Truncated Pseudo-Predictor Feedback

This paper provides an alternative approach referred to as pseudo-predictor feedback (PPF) for stabilization of linear systems with multiple input delays. Differently from the traditional predictor feedback which is from the model reduction appoint of view, the proposed PPF utilizes the idea of prediction by generalizing the corresponding results for linear systems with a single input delay to the case of multiple input delays. Since the PPF will generally lead to distributed controllers, a truncated pseudopredictor feedback (TPPF) approach is established instead which gives finite dimensional controllers. It is shown that the TPPF can compensate arbitrarily large yet bounded delays as long as the open-loop system is only polynomially unstable. The proposed TPPF approach is then used to solve the consensus problems for multi-agent systems characterized by linear systems with multiple input delays. Numerical examples show the effectiveness of the proposed approach.

preprint2014arXiv

The study of neutron spectra in water bath from Pb target irradiated by 250MeV/u protons

The spallation neutrons were produced by the irradiation of Pb with 250 MeV protons. The Pb target was surrounded by water which was used to slow down the emitted neutrons. The moderated neutrons in the water bath were measured by using the resonance detectors of Au, Mn and In with Cd cover. According to the measured activities of the foils, the neutron flux at different resonance energy were deduced and the epithermal neutron spectra were proposed. Corresponding results calculated with the Monte Carlo code MCNPX were compared with the experimental data to check the validity of the code.

preprint2013arXiv

The second Born approximation of electron-argon elastic scattering in a Bichromatic laser field

We study the elastic scattering of atomic argon by electron in the presence of a bichromatic laser field in the second Born approximation. The target atom is approximated by a simple screening potential and the continuum states of the impinging and emitting electrons are described as Volkov states. We evaluate the S-matrix elements numerically. The dependence of differential cross section on the relative phase between the two laser components is presented. The results obtained in the first and second Born approximation are compared and analysed.

preprint2012arXiv

New Geometry with All Killing Vectors Spanning the Poincaré Algebra

The new 4D geometry whose Killing vectors span the Poincaré algebra is presented and its structure is analyzed. The new geometry can be regarded as the Poincaré-invariant solution of the degenerate extension of the vacuum Einstein field equations with a negative cosmological constant and provides a static cosmological space-time with a Lobachevsky space. The motion of free particles in the space-time is discussed.

preprint2012arXiv

Positive Definite Solutions of the Nonlinear Matrix Equation $X+A^{\mathrm{H}}\bar{X}^{-1}A=I$

This paper is concerned with the positive definite solutions to the matrix equation $X+A^{\mathrm{H}}\bar{X}^{-1}A=I$ where $X$ is the unknown and $A$ is a given complex matrix. By introducing and studying a matrix operator on complex matrices, it is shown that the existence of positive definite solutions of this class of nonlinear matrix equations is equivalent to the existence of positive definite solutions of the nonlinear matrix equation $W+B^{\mathrm{T}}W^{-1}B=I$ which has been extensively studied in the literature, where $B$ is a real matrix and is uniquely determined by $A.$ It is also shown that if the considered nonlinear matrix equation has a positive definite solution, then it has the maximal and minimal solutions. Bounds of the positive definite solutions are also established in terms of matrix $A$. Finally some sufficient conditions and necessary conditions for the existence of positive definite solutions of the equations are also proposed.

preprint2012arXiv

Toward Solution of Matrix Equation X=Af(X)B+C

This paper studies the solvability, existence of unique solution, closed-form solution and numerical solution of matrix equation $X=Af(X) B+C$ with $f(X) =X^{\mathrm{T}},$ $f(X) =\bar{X}$ and $f(X) =X^{\mathrm{H}},$ where $X$ is the unknown. It is proven that the solvability of these equations is equivalent to the solvability of some auxiliary standard Stein equations in the form of $W=\mathcal{A}W\mathcal{B}+\mathcal{C}$ where the dimensions of the coefficient matrices $\mathcal{A},\mathcal{B}$ and $\mathcal{C}$ are the same as those of the original equation. Closed-form solutions of equation $X=Af(X) B+C$ can then be obtained by utilizing standard results on the standard Stein equation. On the other hand, some generalized Stein iterations and accelerated Stein iterations are proposed to obtain numerical solutions of equation equation $X=Af(X) B+C$. Necessary and sufficient conditions are established to guarantee the convergence of the iterations.

preprint2011arXiv

Crossover from Majorana edge to end states in quasi-one-dimensional p-wave superconductors

In a recent work [Potter and Lee, Phys. Rev. Lett. 105, 227003 (2010)], it was demonstrated by means of numerical diagonalization that the Majorana end states can be localized at opposite ends of a sample of an ideal spinless p-wave superconductor with the strip geometry beyond the strict one-dimensional limit. Here we reexamine this issue, and study the topological quantum phase transition in the same system. We give the phase diagrams of the presence of Majorana end modes by using of $Z_{2}$ topological index. It is found that the topological property of a strip geometry will change in an oscillatory way with respect of the sample width.

preprint2011arXiv

Smooth Solutions and Discrete Imaginary Mass of the Klein-Gordon Equation in the de Sitter Background

Using methods in the theory of semisimple Lie algebras, we can obtain all smooth solutions of the Klein-Gordon equation on the 4-dimensional de Sitter spacetime (dS^4). The mass of a Klein-Gordon scalar on dS^4 is related to an eigenvalue of the Casimir operator of so(1,4). Thus it is discrete, or quantized. Furthermore, the mass m of a Klein-Gordon scalar on dS^4 is imaginary: m^2 being proportional to -N(N+3), with N >= 0 an integer.

preprint2011arXiv

Theory of magnetoelectric photocurrent generated by direct interband transitions in semiconductor quantum well

A linearly polarized light normally incident on a semiconductor quantum well with spin-orbit coupling may generate pure spin current via direct interband optical transition. An electric photocurrent can be extracted from the pure spin current when an in-plane magnetic field is applied, which has been recently observed in the InGaAs/InAlAs quantum well [Dai et al., Phys. Rev. Lett. 104, 246601 (2010)]. Here we present a theoretical study of this magnetoelectric photocurrent effect associated with the interband transition. By employing the density matrix formalism, we show that the photoexcited carrier density has an anisotropic distribution in k space, strongly dependent on the orientation of the electron wavevector and the polarization of the light. This anisotropy provides an intuitive picture of the observed dependence of the photocurrent on the magnetic field and the polarization of the light. We also show that the ratio of the pure spin photocurrent to the magnetoelectric photocurrent is approximately equal to the ratio of the kinetic energy to the Zeeman energy, which enables us to estimate the magnitude of the pure spin photocurrent. The photocurrent density calculated with the help of an anisotropic Rashba model and the Kohn-Luttinger model can produce all three terms in the fitting formula for measured current, with comparable order of magnitude, but discrepancies are still present and further investigation is needed.

preprint2010arXiv

Geometries for Possible Kinematics

The algebras for all possible Lorentzian and Euclidean kinematics with $\frak{so}(3)$ isotropy except static ones are re-classified. The geometries for algebras are presented by contraction approach. The relations among the geometries are revealed. Almost all geometries fall into pairs. There exists $t \leftrightarrow 1/(ν^2t)$ correspondence in each pair. In the viewpoint of differential geometry, there are only 9 geometries, which have right signature and geometrical spatial isotropy. They are 3 relativistic geometries, 3 absolute-time geometries, and 3 absolute-space geometries.

preprint2010arXiv

The first boundary value problem for Abreu's equation

In this paper we prove the existence and regularity of solutions to the first boundary value problem for Abreu's equation, which is a fourth order nonlinear partial differential equation closely related to the Monge-Ampere equation. The first boundary value problem can be formulated as a variational problem for the energy functional. The existence and uniqueness of maximizers can be obtained by the concavity of the functional. The main ingredients of the paper are the a priori estimates and an approximation result, which enable us to prove that the maximizer is smooth in dimension 2.

preprint2008arXiv

The Principle of Relativity, Kinematics and Algebraic Relations

Based on the principle of relativity and the postulate on universal invariant constants (c,l), all possible kinematics can be set up with sub-symmetries of the Umov-Weyl-Fock transformations for the inertial motions. Further, in the combinatory approach, all these symmetries are intrinsically related to each other, e.g. to the very important dS kinematics for the cosmic scale physics.