Researcher profile

Benjamin Mort

Benjamin Mort contributes to research discovery and scholarly infrastructure.

ResearcherAffiliation not importedOpen to collaborate

astro-ph.IM astro-ph.CO

Trust snapshot

Quick read

Trust 19 - Baseline

5works

0followers

2topics

4close collaborators

Actions

Decide how to stay connected

Follow researcher0

Inspect adjacent work, topics, institutions and collaborators without jumping out to a separate graph page.

Building this graph slice

BZPEER is loading the nearby papers, people, topics and institutions for this page.

preprint2016arXiv

Analysing the impact of far-out side-lobes on the imaging performance of the SKA-LOW telescope

The Square Kilometre Array's Low Frequency instrument (SKA-LOW) will be the most sensitive aperture array ever used for radio astronomy, and will operate in the under-sampled regime for most of the frequency band where grating-lobes pose particular challenges. To achieve the expected level of sensitivity for SKA-LOW, it is particularly important to understand how interfering sources in both near and far side-lobes of the station beam affect the imaging performance. We discuss options for station designs, and adopting a random element layout, we assess its effectiveness by investigating how sources far from the main lobe of the station beam degrade images of the target field. These sources have the effect of introducing a noise-like corruption to images, which we call the Far Side-lobe Source Noise (FSSN). Using OSKAR, a GPU-accelerated software simulator, we carried out end-to-end simulations using an all-sky model and telescope configuration representative of the SKA-LOW instrument. The FSSN is a function of both the station beam and the interferometric point spread function, and decreases with increasing observation time until the coverage of the aperture plane no longer improves. Using apodisation to reduce the level of near-in side-lobes of the station beam had a noticeable improvement on the level of FSSN at low frequencies. Our results indicate that the effects of picking up sources in the side-lobes are worse at low frequencies, where the array is less sparse.

preprint2016arXiv

The Effect of Foreground Mitigation Strategy on EoR Window Recovery

The removal of the Galactic and extragalactic foregrounds remains a major challenge for those wishing to make a detection of the Epoch of Reionization 21-cm signal. Multiple methods of modelling these foregrounds with varying levels of assumption have been trialled and shown promising recoveries on simulated data. Recently however there has been increased discussion of using the expected shape of the foregrounds in Fourier space to define an EoR window free of foreground contamination. By carrying out analysis within this window only, one can avoid the foregrounds and any statistical bias they might introduce by instead removing these foregrounds. In this paper we discuss the advantages and disadvantages of both foreground removal and foreground avoidance. We create a series of simulations with noise levels in line with both current and future experiments and compare the recovered statistical cosmological signal from foreground avoidance and a simplified, frequency independent foreground removal model. We find that while, for current generation experiments, foreground avoidance enables a better recovery at $k_{perp} > 0.6 \mathrm{Mpc}^{-1}$, foreground removal is able to recover significantly more signal at small $k_{los}$ for both current and future experiments. We also relax the assumption that the foregrounds are smooth by introducing a Gaussian random factor along the line-of-sight and then also spatially. We find that both methods perform well for foreground models with line-of-sight and spatial variations around $0.1\%$ however at levels larger than this foregrounds removal shows a greater signal recovery.

preprint2015arXiv

Cosmic Dawn and Epoch of Reionization Foreground Removal with the SKA

The exceptional sensitivity of the SKA will allow observations of the Cosmic Dawn and Epoch of Reionization (CD/EoR) in unprecedented detail, both spectrally and spatially. This wealth of information is buried under Galactic and extragalactic foregrounds, which must be removed accurately and precisely in order to reveal the cosmological signal. This problem has been addressed already for the previous generation of radio telescopes, but the application to SKA is different in many aspects. In this chapter we summarise the contributions to the field of foreground removal in the context of high redshift and high sensitivity 21-cm measurements. We use a state-of-the-art simulation of the SKA Phase 1 observations complete with cosmological signal, foregrounds and frequency-dependent instrumental effects to test both parametric and non-parametric foreground removal methods. We compare the recovered cosmological signal using several different statistics and explore one of the most exciting possibilities with the SKA --- imaging of the ionized bubbles. We find that with current methods it is possible to remove the foregrounds with great accuracy and to get impressive power spectra and images of the cosmological signal. The frequency-dependent PSF of the instrument complicates this recovery, so we resort to splitting the observation bandwidth into smaller segments, each of a common resolution. If the foregrounds are allowed a random variation from the smooth power law along the line of sight, methods exploiting the smoothness of foregrounds or a parametrization of their behaviour are challenged much more than non-parametric ones. However, we show that correction techniques can be implemented to restore the performances of parametric approaches, as long as the first-order approximation of a power law stands.

preprint2014arXiv

Effect of gain and phase errors on SKA1-low imaging quality from 50-600 MHz

Simulations of SKA1-low were performed to estimate the noise level in images produced by the telescope over a frequency range 50-600 MHz, which extends the 50-350 MHz range of the current baseline design. The root-mean-square (RMS) deviation between images produced by an ideal, error-free SKA1-low and those produced by SKA1-low with varying levels of uncorrelated gain and phase errors was simulated. The residual in-field and sidelobe noise levels were assessed. It was found that the RMS deviations decreased as the frequency increased. The residual sidelobe noise decreased by a factor of ~5 from 50 to 100 MHz, and continued to decrease at higher frequencies, attributable to wider strong sidelobes and brighter sources at lower frequencies. The thermal noise limit is found to range between ~10 - 0.3 $μ$Jy and is reached after ~100-100 000 hrs integration, depending on observation frequency, with the shortest integration time required at ~100 MHz.

preprint2011arXiv

Real-time, fast radio transient searches with GPU de-dispersion

The identification, and subsequent discovery, of fast radio transients through blind-search surveys requires a large amount of processing power, in worst cases scaling as $\mathcal{O}(N^3)$. For this reason, survey data are generally processed offline, using high-performance computing architectures or hardware-based designs. In recent years, graphics processing units have been extensively used for numerical analysis and scientific simulations, especially after the introduction of new high-level application programming interfaces. Here we show how GPUs can be used for fast transient discovery in real-time. We present a solution to the problem of de-dispersion, providing performance comparisons with a typical computing machine and traditional pulsar processing software. We describe the architecture of a real-time, GPU-based transient search machine. In terms of performance, our GPU solution provides a speed-up factor of between 50 and 200, depending on the parameters of the search.