Source author record

A. Chockalingam

A. Chockalingam appears in the imported research catalog. Authorship, coauthor and topic links are available while profile ownership is still unclaimed.

ResearcherUnclaimed source record

Catalog footprint

What is connected

33works
3topics
4close collaborators

Actions

Connect this record

Log in to claim

Research graph

See the researcher in context

Open full explorer

Inspect adjacent papers, topics, institutions and collaborators without losing the researcher page.

Building this map preview

BZPEER is loading the nearby papers, people, topics and institutions for this page.

Published work

33 published item(s)

preprint2022arXiv

Deep Channel Prediction: A DNN Framework for Receiver Design in Time-Varying Fading Channels

In time-varying fading channels, channel coefficients are estimated using pilot symbols that are transmitted every coherence interval. For channels with high Doppler spread, the rapid channel variations over time will require considerable bandwidth for pilot transmission, leading to poor throughput. In this paper, we propose a novel receiver architecture using deep recurrent neural networks (RNNs) that learns the channel variations and thereby reduces the number of pilot symbols required for channel estimation. Specifically, we design and train an RNN to learn the correlation in the time-varying channel and predict the channel coefficients into the future with good accuracy over a wide range of Dopplers and signal-to-noise ratios (SNR). The proposed training methodology enables accurate channel prediction through the use of techniques such as teacher-force training, early-stop, and reduction of learning rate on plateau. Also, the robustness of prediction for different Dopplers and SNRs is achieved by adapting the number of predictions into the future based on the Doppler and SNR. Numerical results show that good bit error performance is achieved by the proposed receiver in time-varying fading channels. We also propose a data decision driven receiver architecture using RNNs that further reduces the pilot overhead while maintaining good bit error performance.

preprint2022arXiv

Learning based Channel Estimation and Phase Noise Compensation in Doubly-Selective Channels

In this letter, we propose a learning based channel estimation scheme for orthogonal frequency division multiplexing (OFDM) systems in the presence of phase noise in doubly-selective fading channels. Two-dimensional (2D) convolutional neural networks (CNNs) are employed for effective training and tracking of channel variation in both frequency as well as time domain. The proposed network learns and estimates the channel coefficients in the entire time-frequency (TF) grid based on pilots sparsely populated in the TF grid. In order to make the network robust to phase noise (PN) impairment, a novel training scheme where the training data is rotated by random phases before being fed to the network is employed. Further, using the estimated channel coefficients, a simple and effective PN estimation and compensation scheme is devised. Numerical results demonstrate that the proposed network and PN compensation scheme achieve robust OFDM performance in the presence of phase noise.

preprint2021arXiv

Performance Analysis of OTFS Modulation with Receive Antenna Selection

In this paper, we analyze the performance of orthogonal time frequency space (OTFS) modulation with antenna selection at the receiver, where $n_s$ out of $n_r$ receive antennas with maximum channel Frobenius norms in the delay-Doppler (DD) domain are selected. Single-input multiple-output OTFS (SIMO-OTFS), multiple-input multiple-output OTFS (MIMO-OTFS), and space-time coded OTFS (STC-OTFS) systems with receive antenna selection (RAS) are considered. We consider these systems without and with phase rotation. Our diversity analysis results show that, with no phase rotation, SIMO-OTFS and MIMO-OTFS systems with RAS are rank deficient, and therefore they do not extract the full receive diversity as well as the diversity present in the DD domain. Also, Alamouti coded STC-OTFS system with RAS and no phase rotation extracts the full transmit diversity, but it fails to extract the DD diversity. On the other hand, SIMO-OTFS and STC-OTFS systems with RAS become full-ranked when phase rotation is used, because of which they extract the full spatial as well as the DD diversity present in the system. Also, when phase rotation is used, MIMO-OTFS systems with RAS extract the full DD diversity, but they do not extract the full receive diversity because of rank deficiency. Simulation results are shown to validate the analytically predicted diversity performance.

preprint2020arXiv

A DNN Architecture for the Detection of Generalized Spatial Modulation Signals

In this letter, we consider the problem of signal detection in generalized spatial modulation (GSM) using deep neural networks (DNN). We propose a novel modularized DNN architecture that uses small sub-DNNs to detect the active antennas and complex modulation symbols, instead of using a single large DNN to jointly detect the active antennas and modulation symbols. The main idea is that using small sub-DNNs instead of a single large DNN reduces the required size of the NN and hence requires learning lesser number of parameters. Under the assumption of i.i.d Gaussian noise, the proposed DNN detector achieves a performance very close to that of the maximum likelihood detector. We also analyze the performance of the proposed detector under two practical conditions: i) correlated noise across receive antennas and ii) noise distribution deviating from the standard Gaussian model. The proposed DNN-based detector learns the deviations from the standard model and achieves superior performance compared to that of the conventional maximum likelihood detector.

preprint2020arXiv

Constellation Design for Media-based Modulation using Block Codes and Squaring Construction

Efficient constellation design is important for improving performance in communication systems. The problem of multidimensional constellation design has been studied extensively in the literature in the context of multidimensional coded modulation and space-time coded MIMO systems. Such constellations are formally called as lattice codes, where a finite set of points from a certain high dimensional lattice is chosen based on some criteria. In this paper, we consider the problem of constellation/signal set design for media-based modulation (MBM), a recent MIMO channel modulation scheme with promising theoretical and practical benefits. Constellation design for MBM is fundamentally different from those for multidimensional coded modulation and conventional MIMO systems mainly because of the inherent sparse structure of the MBM signal vectors. Specifically, we need a structured sparse lattice code with good distance properties. In this work, we show that using an (N,K) non-binary block code in conjunction with the lattice based multilevel squaring construction, it is possible to systematically construct a signal set for MBM with certain guaranteed minimum distance. The MBM signal set obtained using the proposed construction is shown to achieve significantly improved bit error performance compared to conventional MBM signal set. In particular, the proposed signal set is found to achieve higher diversity slopes in the low-to-moderate SNR regime.

preprint2016arXiv

Multiuser Media-based Modulation for Massive MIMO Systems

In this paper, we consider {\em media-based modulation (MBM)}, an attractive modulation scheme which is getting increased research attention recently, for the uplink of a massive MIMO system. Each user is equipped with one transmit antenna with multiple radio frequency (RF) mirrors (parasitic elements) placed near it. The base station (BS) is equipped with tens to hundreds of receive antennas. MBM with $m_{rf}$ RF mirrors and $n_r$ receive antennas over a multipath channel has been shown to asymptotically (as $m_{rf}\rightarrow \infty$) achieve the capacity of $n_r$ parallel AWGN channels. This suggests that MBM can be attractive for use in massive MIMO systems which typically employ a large number of receive antennas at the BS. In this paper, we investigate the potential performance advantage of multiuser MBM (MU-MBM) in a massive MIMO setting. Our results show that multiuser MBM (MU-MBM) can significantly outperform other modulation schemes. For example, a bit error performance achieved using 500 receive antennas at the BS in a massive MIMO system using conventional modulation can be achieved using just 128 antennas using MU-MBM. Even multiuser spatial modulation, and generalized spatial modulation in the same massive MIMO settings require more than 200 antennas to achieve the same bit error performance. Also, recognizing that the MU-MBM signal vectors are inherently sparse, we propose an efficient MU-MBM signal detection scheme that uses compressive sensing based reconstruction algorithms like orthogonal matching pursuit (OMP), compressive sampling matching pursuit (CoSaMP), and subspace pursuit (SP).

preprint2016arXiv

On Media-based Modulation using RF Mirrors

Media-based modulation (MBM) is a recently proposed modulation scheme which uses radio frequency (RF) mirrors at the transmit antenna(s) in order to create different channel fade realizations based on their ON/OFF status. These complex fade realizations constitute the modulation alphabet. MBM has the advantage of increased spectral efficiency and performance. In this paper, we investigate the performance of some physical layer techniques when applied to MBM. Particularly, we study the performance of $i)$ MBM with generalized spatial modulation (GSM), $ii)$ MBM with mirror activation pattern (MAP) selection based on an Euclidean distance (ED) based metric, and $iii)$ MBM with feedback based phase compensation and constellation rotation. Our results show that, for the same spectral efficiency, GSM-MBM can achieve better performance compared to MIMO-MBM. Also, it is found that MBM with ED-based MAP selection results in improved bit error performance, and that phase compensation and MBM constellation rotation increases the ED between the MBM constellation points and improves the performance significantly. We also analyze the diversity orders achieved by the ED-based MAP selection scheme and the phase compensation and constellation rotation (PC-CR) scheme. The diversity orders predicted by the analysis are validated through simulations.

preprint2016arXiv

On the Capacity and Performance of Generalized Spatial Modulation

Generalized spatial modulation (GSM) uses $N$ antenna elements but fewer radio frequency (RF) chains ($R$) at the transmitter. Spatial modulation and spatial multiplexing are special cases of GSM with $R=1$ and $R=N$, respectively. In GSM, apart from conveying information bits through $R$ modulation symbols, information bits are also conveyed through the indices of the $R$ active transmit antennas. In this paper, we derive lower and upper bounds on the the capacity of a ($N,M,R$)-GSM MIMO system, where $M$ is the number of receive antennas. Further, we propose a computationally efficient GSM encoding (i.e., bits-to-signal mapping) method and a message passing based low-complexity detection algorithm suited for large-scale GSM-MIMO systems.

preprint2016arXiv

Quad-LED and Dual-LED Complex Modulation for Visible Light Communication

In this paper, we propose simple and novel complex modulation techniques that exploit the spatial domain to transmit complex-valued modulation symbols in visible light wireless communication. The idea is to use multiple light emitting diodes (LEDs) to convey the real and imaginary parts of a complex modulation symbol and their sign information, or, alternately, to convey the magnitude and phase of a complex symbol. The proposed techniques are termed as {\em quad-LED complex modulation (QCM)} and {\em dual-LED complex modulation (DCM)}. The proposed QCM scheme uses four LEDs (hence the name `quad-LED'); while the magnitudes of the real and imaginary parts are conveyed through intensity modulation of LEDs, the sign information is conveyed through spatial indexing of LEDs. The proposed DCM scheme, on the other hand, exploits the polar representation of a complex symbol; it uses only two LEDs (hence the name `dual-LED'), one LED to map the magnitude and another LED to map the phase of a complex modulation symbol. These techniques do not need Hermitian symmetry operation to generate LED compatible positive real transmit signals. We present zero-forcing and minimum distance detectors and their performance for QCM-OFDM and DCM-OFDM. We further propose another modulation scheme, termed as SM-DCM {\em (spatial modulation-DCM)} scheme, which brings in the advantage of spatial modulation (SM) to DCM. The proposed SM-DCM scheme uses two DCM BLOCKs with two LEDs in each BLOCK, and an index bit decides which among the two BLOCKs will be used in a given channel use. We study the bit error rate (BER) performance of the proposed schemes through analysis and simulations. Using tight analytical BER upper bounds and spatial distribution of the received signal-to-noise ratios, we compute and plot the achievable rate contours for a given target BER in QCM, DCM, and SM-DCM.

preprint2016arXiv

Space-Time Index Modulation

In this paper, we present a new multi-antenna modulation scheme, termed as {\em space-time index modulation (STIM)}. In STIM, information bits are conveyed through antenna indexing in the spatial domain, slot indexing in the time domain, and $M$-ary modulation symbols. A time slot in a given frame can be used or unused, and the choice of the slots used for transmission conveys slot index bits. In addition, antenna index bits are conveyed in every used time slot by activating one among the available antennas. $M$-ary symbols are sent on the active antenna in a used time slot. We study STIM in a cyclic-prefixed single-carrier (CPSC) system in frequency-selective fading channels. It is shown that, for the same spectral efficiency, STIM can achieve better performance compared to conventional orthogonal frequency division multiplexing (OFDM). Low-complexity iterative algorithms for the detection of large-dimensional STIM signals are also presented.

preprint2016arXiv

Transmitter Optimization in Slow Fading MISO Wiretap Channel

In this paper, we consider the transmitter optimization problem in slow fading multiple-input-single-output (MISO) wiretap channel. The source transmits a secret message intended for $K$ users in the presence of $J$ non-colluding eavesdroppers, and operates under a total power constraint. The channels between the source and all users and eavesdroppers are assumed to be slow fading, and only statistical channel state information (CSI) is known at the source. For a given code rate and secrecy rate pair of the wiretap code, denoted by $(R_{D}, R_{s})$, we define the non-outage event as the joint event of the link information rates to $K$ users be greater than or equal to $R_{D}$ and the link information rates to $J$ eavesdroppers be less than or equal to $(R_{D} - R_{s})$. We minimize the transmit power subject to the total power constraint and satisfying the probability of the non-outage event to be greater than or equal to a desired threshold $(1-ε)$.

preprint2015arXiv

Coded Index Modulation for Non-DC-Biased OFDM in Multiple LED Visible Light Communication

Use of multiple light emitting diodes (LED) is an attractive way to increase spectral efficiency in visible light communications (VLC). A non-DC-biased OFDM (NDC OFDM) scheme that uses two LEDs has been proposed in the literature recently. NDC OFDM has been shown to perform better than other OFDM schemes for VLC like DC-biased OFDM (DCO OFDM) and asymmetrically clipped OFDM (ACO OFDM) in multiple LEDs settings. In this paper, we propose an efficient multiple LED OFDM scheme for VLC which uses {\em coded index modulation}. The proposed scheme uses two transmitter blocks, each having a pair of LEDs. Within each block, NDC OFDM signaling is done. The selection of which block is activated in a signaling interval is decided by information bits (i.e., index bits). In order to improve the reliability of the index bits at the receiver (which is critical because of high channel correlation in multiple LEDs settings), we propose to use coding on the index bits alone. We call the proposed scheme as CI-NDC OFDM (coded index NDC OFDM) scheme. Simulation results show that, for the same spectral efficiency, CI-NDC OFDM that uses LDPC coding on the index bits performs better than NDC OFDM.

preprint2015arXiv

Generalized Space and Frequency Index Modulation

Unlike in conventional modulation where information bits are conveyed only through symbols from modulation alphabets defined in the complex plane (e.g., quadrature amplitude modulation (QAM), phase shift keying (PSK)), in index modulation (IM), additional information bits are conveyed through indices of certain transmit entities that get involved in the transmission. Transmit antennas in multi-antenna systems and subcarriers in multi-carrier systems are examples of such transmit entities that can be used to convey additional information bits through indexing. In this paper, we introduce {\em generalized space and frequency index modulation}, where the indices of active transmit antennas and subcarriers convey information bits. We first introduce index modulation in the spatial domain, referred to as generalized spatial index modulation (GSIM). For GSIM, where bits are indexed only in the spatial domain, we derive the expression for achievable rate as well as easy-to-compute upper and lower bounds on this rate. We show that the achievable rate in GSIM can be more than that in spatial multiplexing, and analytically establish the condition under which this can happen. It is noted that GSIM achieves this higher rate using fewer transmit radio frequency (RF) chains compared to spatial multiplexing. We also propose a Gibbs sampling based detection algorithm for GSIM and show that GSIM can achieve better bit error rate (BER) performance than spatial multiplexing. For generalized space-frequency index modulation (GSFIM), where bits are encoded through indexing in both active antennas as well as subcarriers, we derive the achievable rate expression. Numerical results show that GSFIM can achieve higher rates compared to conventional MIMO-OFDM. Also, BER results show the potential for GSFIM performing better than MIMO-OFDM.

preprint2015arXiv

Generalized Spatial Modulation in Indoor Wireless Visible Light Communication

In this paper, we investigate the performance of generalized spatial modulation (GSM) in indoor wireless visible light communication (VLC) systems. GSM uses $N_t$ light emitting diodes (LED), but activates only $N_a$ of them at a given time. Spatial modulation and spatial multiplexing are special cases of GSM with $N_{a}=1$ and $N_{a}=N_t$, respectively. We first derive an analytical upper bound on the bit error rate (BER) for maximum likelihood (ML) detection of GSM in VLC systems. Analysis and simulation results show that the derived upper bound is very tight at medium to high signal-to-noise ratios (SNR). The channel gains and channel correlations influence the GSM performance such that the best BER is achieved at an optimum LED spacing. Also, for a fixed transmission efficiency, the performance of GSM in VLC improves as the half-power semi-angle of the LEDs is decreased. We then compare the performance of GSM in VLC systems with those of other MIMO schemes such as spatial multiplexing (SMP), space shift keying (SSK), generalized space shift keying (GSSK), and spatial modulation (SM). Analysis and simulation results show that GSM in VLC outperforms the other considered MIMO schemes at moderate to high SNRs; for example, for 8 bits per channel use, GSM outperforms SMP and GSSK by about 21 dB, and SM by about 10 dB at $10^{-4}$ BER.

preprint2015arXiv

Generalized Spatial Modulation in Large-Scale Multiuser MIMO Systems

Generalized spatial modulation (GSM) uses $n_t$ transmit antenna elements but fewer transmit radio frequency (RF) chains, $n_{rf}$. Spatial modulation (SM) and spatial multiplexing are special cases of GSM with $n_{rf}=1$ and $n_{rf}=n_t$, respectively. In GSM, in addition to conveying information bits through $n_{rf}$ conventional modulation symbols (for example, QAM), the indices of the $n_{rf}$ active transmit antennas also convey information bits. In this paper, we investigate {\em GSM for large-scale multiuser MIMO communications on the uplink}. Our contributions in this paper include: ($i$) an average bit error probability (ABEP) analysis for maximum-likelihood detection in multiuser GSM-MIMO on the uplink, where we derive an upper bound on the ABEP, and ($ii$) low-complexity algorithms for GSM-MIMO signal detection and channel estimation at the base station receiver based on message passing. The analytical upper bounds on the ABEP are found to be tight at moderate to high signal-to-noise ratios (SNR). The proposed receiver algorithms are found to scale very well in complexity while achieving near-optimal performance in large dimensions. Simulation results show that, for the same spectral efficiency, multiuser GSM-MIMO can outperform multiuser SM-MIMO as well as conventional multiuser MIMO, by about 2 to 9 dB at a bit error rate of $10^{-3}$. Such SNR gains in GSM-MIMO compared to SM-MIMO and conventional MIMO can be attributed to the fact that, because of a larger number of spatial index bits, GSM-MIMO can use a lower-order QAM alphabet which is more power efficient.

preprint2015arXiv

MIMO DF Relay Beamforming for Secrecy with Artificial Noise, Imperfect CSI, and Finite-Alphabet

In this paper, we consider decode-and-forward (DF) relay beamforming with imperfect channel state information (CSI), cooperative artificial noise (AN) injection, and finite-alphabet input in the presence of an user and $J$ non-colluding eavesdroppers. The communication between the source and the user is aided by a multiple-input-multiple-output (MIMO) DF relay. We use the fact that a wiretap code consists of two parts: i) common message (non-secret), and ii) secret message. The source transmits two independent messages: i) common message (non-secret), and ii) secret message. The common message is transmitted at a fixed rate $R_{0}$, and it is intended for the user. The secret message is also intended for the user but it should be kept secret from the $J$ eavesdroppers. The source and the MIMO DF relay operate under individual power constraints. In order to improve the secrecy rate, the MIMO relay also injects artificial noise. The CSI on all the links are assumed to be imperfect and CSI errors are assumed to be norm bounded. In order to maximize the worst case secrecy rate, we maximize the worst case link information rate to the user subject to: i) the individual power constraints on the source and the MIMO relay, and ii) the best case link information rates to $J$ eavesdroppers be less than or equal to $R_{0}$ in order to support a fixed common message rate $R_{0}$. Numerical results showing the effect of perfect/imperfect CSI, presence/absence of AN with finite-alphabet input on the secrecy rate are presented.

preprint2015arXiv

On the Gaussian Many-to-One X Channel

In this paper, the Gaussian many-to-one X channel, which is a special case of general multiuser X channel, is studied. In the Gaussian many-to-one X channel, communication links exist between all transmitters and one of the receivers, along with a communication link between each transmitter and its corresponding receiver. As per the X channel assumption, transmission of messages is allowed on all the links of the channel. This communication model is different from the corresponding many-to-one interference channel (IC). Transmission strategies which involve using Gaussian codebooks and treating interference from a subset of transmitters as noise are formulated for the above channel. Sum-rate is used as the criterion of optimality for evaluating the strategies. Initially, a $3 \times 3$ many-to-one X channel is considered and three transmission strategies are analyzed. The first two strategies are shown to achieve sum-rate capacity under certain channel conditions. For the third strategy, a sum-rate outer bound is derived and the gap between the outer bound and the achieved rate is characterized. These results are later extended to the $K \times K$ case. Next, a region in which the many-to-one X channel can be operated as a many-to-one IC without loss of sum-rate is identified. Further, in the above region, it is shown that using Gaussian codebooks and treating interference as noise achieves a rate point that is within $K/2 -1$ bits from the sum-rate capacity. Subsequently, some implications of the above results to the Gaussian many-to-one IC are discussed. Transmission strategies for the many-to-one IC are formulated and channel conditions under which the strategies achieve sum-rate capacity are obtained. A region where the sum-rate capacity can be characterized to within $K/2-1$ bits is also identified.

preprint2015arXiv

Sum Secrecy Rate in MISO Full-Duplex Wiretap Channel with Imperfect CSI

In this paper, we consider the achievable sum secrecy rate in MISO (multiple-input-single-output) {\em full-duplex} wiretap channel in the presence of a passive eavesdropper and imperfect channel state information (CSI). We assume that the users participating in full-duplex communication have multiple transmit antennas, and that the users and the eavesdropper have single receive antenna each. The users have individual transmit power constraints. They also transmit jamming signals to improve the secrecy rates. We obtain the achievable perfect secrecy rate region by maximizing the worst case sum secrecy rate. We also obtain the corresponding transmit covariance matrices associated with the message signals and the jamming signals. Numerical results that show the impact of imperfect CSI on the achievable secrecy rate region are presented.

preprint2014arXiv

Channel Hardening-Exploiting Message Passing (CHEMP) Receiver in Large-Scale MIMO Systems

In this paper, we propose a MIMO receiver algorithm that exploits {\em channel hardening} that occurs in large MIMO channels. Channel hardening refers to the phenomenon where the off-diagonal terms of the ${\bf H}^H{\bf H}$ matrix become increasingly weaker compared to the diagonal terms as the size of the channel gain matrix ${\bf H}$ increases. Specifically, we propose a message passing detection (MPD) algorithm which works with the real-valued matched filtered received vector (whose signal term becomes ${\bf H}^T{\bf H}{\bf x}$, where ${\bf x}$ is the transmitted vector), and uses a Gaussian approximation on the off-diagonal terms of the ${\bf H}^T{\bf H}$ matrix. We also propose a simple estimation scheme which directly obtains an estimate of ${\bf H}^T{\bf H}$ (instead of an estimate of ${\bf H}$), which is used as an effective channel estimate in the MPD algorithm. We refer to this receiver as the {\em channel hardening-exploiting message passing (CHEMP)} receiver. The proposed CHEMP receiver achieves very good performance in large-scale MIMO systems (e.g., in systems with 16 to 128 uplink users and 128 base station antennas). For the considered large MIMO settings, the complexity of the proposed MPD algorithm is almost the same as or less than that of the minimum mean square error (MMSE) detection. This is because the MPD algorithm does not need a matrix inversion. It also achieves a significantly better performance compared to MMSE and other message passing detection algorithms using MMSE estimate of ${\bf H}$. We also present a convergence analysis of the proposed MPD algorithm. Further, we design optimized irregular low density parity check (LDPC) codes specific to the considered large MIMO channel and the CHEMP receiver through EXIT chart matching. The LDPC codes thus obtained achieve improved coded bit error rate performance compared to off-the-shelf irregular LDPC codes.

preprint2014arXiv

Decode-and-Forward Relay Beamforming with Secret and Non-Secret Messages

In this paper, we study beamforming in decode-and-forward (DF) relaying using multiple relays, where the source node sends a secret message as well as a non-secret message to the destination node in the presence of multiple non-colluding eavesdroppers. The non-secret message is transmitted at a fixed rate $R_{0}$ and requires no protection from the eavesdroppers, whereas the secret message needs to be protected from the eavesdroppers. The source and relays operate under a total power constraint. We find the optimum source powers and weights of the relays for both secret and non-secret messages which maximize the worst case secrecy rate for the secret message as well as meet the information rate constraint $R_{0}$ for the non-secret message. We solve this problem for the cases when ($i$) perfect channel state information (CSI) of all links is known, and ($ii$) only the statistical CSI of the eavesdroppers links and perfect CSI of other links are known.

preprint2014arXiv

Power Allocation in MIMO Wiretap Channel with Statistical CSI and Finite-Alphabet Input

In this paper, we consider the problem of power allocation in MIMO wiretap channel for secrecy in the presence of multiple eavesdroppers. Perfect knowledge of the destination channel state information (CSI) and only the statistical knowledge of the eavesdroppers CSI are assumed. We first consider the MIMO wiretap channel with Gaussian input. Using Jensen's inequality, we transform the secrecy rate max-min optimization problem to a single maximization problem. We use generalized singular value decomposition and transform the problem to a concave maximization problem which maximizes the sum secrecy rate of scalar wiretap channels subject to linear constraints on the transmit covariance matrix. We then consider the MIMO wiretap channel with finite-alphabet input. We show that the transmit covariance matrix obtained for the case of Gaussian input, when used in the MIMO wiretap channel with finite-alphabet input, can lead to zero secrecy rate at high transmit powers. We then propose a power allocation scheme with an additional power constraint which alleviates this secrecy rate loss problem, and gives non-zero secrecy rates at high transmit powers.

preprint2014arXiv

Precoder Index Modulation

Index modulation, where information bits are conveyed through antenna indices (spatial modulation) and subcarrier indices (subcarrier index modulation) in addition to information bits conveyed through conventional modulation symbols, is getting increased research attention. In this paper, we introduce {\em precoder index modulation}, where information bits are conveyed through the choice of a precoder matrix at the transmitter from a set of pre-determined pseudo-random phase precoder (PRPP) matrices. Combining precoder index modulation (PIM) and spatial modulation (SM), we introduce a PIM-SM scheme which conveys information bits through both antenna index as well as precoder index. Spectral efficiency (in bits per channel use) and bit error performance of these index modulation schemes are presented.

preprint2014arXiv

Pseudo-random Phase Precoded Spatial Modulation

Spatial modulation (SM) is a transmission scheme that uses multiple transmit antennas but only one transmit RF chain. At each time instant, only one among the transmit antennas will be active and the others remain silent. The index of the active transmit antenna will also convey information bits in addition to the information bits conveyed through modulation symbols (e.g.,QAM). Pseudo-random phase precoding (PRPP) is a technique that can achieve high diversity orders even in single antenna systems without the need for channel state information at the transmitter (CSIT) and transmit power control (TPC). In this paper, we exploit the advantages of both SM and PRPP simultaneously. We propose a pseudo-random phase precoded SM (PRPP-SM) scheme, where both the modulation bits and the antenna index bits are precoded by pseudo-random phases. The proposed PRPP-SM system gives significant performance gains over SM system without PRPP and PRPP system without SM. Since maximum likelihood (ML) detection becomes exponentially complex in large dimensions, we propose low complexity local search based detection (LSD) algorithm suited for PRPP-SM systems with large precoder sizes. Our simulation results show that with 4 transmit antennas, 1 receive antenna, $5\times 20$ pseudo-random phase precoder matrix and BPSK modulation, the performance of PRPP-SM using ML detection is better than SM without PRPP with ML detection by about 9 dB at $10^{-2}$ BER. This performance advantage gets even better for large precoding sizes.

preprint2014arXiv

Sum Secrecy Rate in Full-Duplex Wiretap Channel with Imperfect CSI

In this paper, we consider the achievable sum secrecy rate in full-duplex wiretap channel in the presence of an eavesdropper and imperfect channel state information (CSI). We assume that the users participating in full-duplex communication and the eavesdropper have single antenna each. The users have individual transmit power constraints. They also transmit jamming signals to improve the secrecy rates. We obtain the achievable perfect secrecy rate region by maximizing the sum secrecy rate. We also obtain the corresponding optimum powers of the message signals and the jamming signals. Numerical results that show the impact of imperfect CSI on the achievable secrecy rate region are presented.

preprint2014arXiv

Transmitter Optimization in MISO Broadcast Channel with Common and Secret Messages

In this paper, we consider transmitter optimization in multiple-input single-output (MISO) broadcast channel with common and secret messages. The secret message is intended for $K$ users and it is transmitted with perfect secrecy with respect to $J$ eavesdroppers which are also assumed to be legitimate users in the network. The common message is transmitted at a fixed rate $R_{0}$ and it is intended for all $K$ users and $J$ eavesdroppers. The source operates under a total power constraint. It also injects artificial noise to improve the secrecy rate. We obtain the optimum covariance matrices associated with the common message, secret message, and artificial noise, which maximize the achievable secrecy rate and simultaneously meet the fixed rate $R_{0}$ for the common message.

preprint2013arXiv

M-ary Detection and q-ary Decoding in Large-Scale MIMO: A Non-Binary Belief Propagation Approach

In this paper, we propose a non-binary belief propagation approach (NB-BP) for detection of $M$-ary modulation symbols and decoding of $q$-ary LDPC codes in large-scale multiuser MIMO systems. We first propose a message passing based symbol detection algorithm which computes vector messages using a scalar Gaussian approximation of interference, which results in a total complexity of just $O(KN\sqrt{M})$, where $K$ is the number of uplink users and $N$ is the number of base station (BS) antennas. The proposed NB-BP detector does not need to do a matrix inversion, which gives a complexity advantage over MMSE detection. We then design optimized $q$-ary LDPC codes by matching the EXIT charts of the proposed detector and the LDPC decoder. Simulation results show that the proposed NB-BP detection-decoding approach using the optimized LDPC codes achieve significantly better performance (by about 1 dB to 7 dB at $10^{-5}$ coded BER for various system loading factors with number of users ranging from 16 to 128 and number of BS antennas fixed at 128) compared to using linear detectors (e.g., MMSE detector) and off-the-shelf $q$-ary irregular LDPC codes. Also, even with estimated channel knowledge (e.g., with MMSE channel estimate), the performance of the proposed NB-BP detector is better than that of the MMSE detector.

preprint2013arXiv

Multiuser SM-MIMO versus Massive MIMO: Uplink Performance Comparison

In this paper, we propose algorithms for signal detection in large-scale multiuser {\em spatial modulation multiple-input multiple-output (SM-MIMO)} systems. In large-scale SM-MIMO, each user is equipped with multiple transmit antennas (e.g., 2 or 4 antennas) but only one transmit RF chain, and the base station (BS) is equipped with tens to hundreds of (e.g., 128) receive antennas. In SM-MIMO, in a given channel use, each user activates any one of its multiple transmit antennas and the index of the activated antenna conveys information bits in addition to the information bits conveyed through conventional modulation symbols (e.g., QAM). We propose two different algorithms for detection of large-scale SM-MIMO signals at the BS; one is based on {\em message passing} and the other is based on {\em local search}. The proposed algorithms are shown to achieve very good performance and scale well. Also, for the same spectral efficiency, multiuser SM-MIMO outperforms conventional multiuser MIMO (recently being referred to as massive MIMO) by several dBs; for e.g., with 16 users, 128 antennas at the BS and 4 bpcu per user, SM-MIMO with 4 transmit antennas per user and 4-QAM outperforms massive MIMO with 1 transmit antenna per user and 16-QAM by about 4 to 5 dB at $10^{-3}$ uncoded BER. The SNR advantage of SM-MIMO over massive MIMO can be attributed to the following reasons: (i) because of the spatial index bits, SM-MIMO can use a lower-order QAM alphabet compared to that in massive MIMO to achieve the same spectral efficiency, and (ii) for the same spectral efficiency and QAM size, massive MIMO will need more spatial streams per user which leads to increased spatial interference.

preprint2012arXiv

A Novel MCMC Based Receiver for Large-Scale Uplink Multiuser MIMO Systems

In this paper, we propose low complexity algorithms based on Markov chain Monte Carlo (MCMC) technique for signal detection and channel estimation on the uplink in large scale multiuser multiple input multiple output (MIMO) systems with tens to hundreds of antennas at the base station (BS) and similar number of uplink users. A BS receiver that employs a randomized sampling method (which makes a probabilistic choice between Gibbs sampling and random sampling in each iteration) for detection and a Gibbs sampling based method for channel estimation is proposed. The algorithm proposed for detection alleviates the stalling problem encountered at high SNRs in conventional MCMC algorithm and achieves near-optimal performance in large systems. A novel ingredient in the detection algorithm that is responsible for achieving near-optimal performance at low complexities is the joint use of a {\it randomized MCMC (R-MCMC) strategy} coupled with a {\it multiple restart strategy} with an efficient restart criterion. Near-optimal detection performance is demonstrated for large number of BS antennas and users (e.g., 64, 128, 256 BS antennas/users). The proposed MCMC based channel estimation algorithm refines an initial estimate of the channel obtained during pilot phase through iterations with R-MCMC detection during data phase. In time division duplex (TDD) systems where channel reciprocity holds, these channel estimates can be used for multiuser MIMO precoding on the downlink. Further, we employ this receiver architecture in the frequency domain for receiving cyclic prefixed single carrier (CPSC) signals on frequency selective fading between users and the BS. The proposed receiver achieves performance that is near optimal and close to that achieved with perfect channel knowledge.

preprint2011arXiv

Full-Rate Full-Diversity Achieving MIMO Precoding with Partial CSIT

In this paper, we consider a $n_t\times n_r$ multiple-input multiple-output (MIMO) channel subjected to block fading. Reliability (in terms of achieved diversity order) and rate (in number of symbols transmitted per channel use) are of interest in such channels. We propose a new precoding scheme which achieves both full diversity ($n_tn_r$th order diversity) as well as full rate ($n_t$ symbols per channel use) using partial channel state information at the transmitter (CSIT), applicable in MIMO systems including $n_r<n_t$ asymmetric MIMO. The proposed scheme achieves full diversity and improved coding gain through an optimization over the choice of constellation sets. The optimization maximizes $d_{min}^2$ for our precoding scheme subject to an energy constraint. The scheme requires feedback of $n_t-1$ angle parameter values, compared to $2n_tn_r$ real coefficients in case of full CSIT. Error rate performance results for $3\times 1$, $3\times 2$, $4\times 1$, $8\times 1$ precoded MIMO systems (with $n_t=3,3,4,8$ symbols per channel use, respectively) show that the proposed precoding achieves 3rd, 6th, 4th and 8th order diversities, respectively. These performances are shown to be better than other precoding schemes in the literature; the better performance is due to the choice of the signal sets and the feedback angles in the proposed scheme.

preprint2011arXiv

Low-Complexity Detection/Equalization in Large-Dimension MIMO-ISI Channels Using Graphical Models

In this paper, we deal with low-complexity near-optimal detection/equalization in large-dimension multiple-input multiple-output inter-symbol interference (MIMO-ISI) channels using message passing on graphical models. A key contribution in the paper is the demonstration that near-optimal performance in MIMO-ISI channels with large dimensions can be achieved at low complexities through simple yet effective simplifications/approximations, although the graphical models that represent MIMO-ISI channels are fully/densely connected (loopy graphs). These include 1) use of Markov Random Field (MRF) based graphical model with pairwise interaction, in conjunction with {\em message/belief damping}, and 2) use of Factor Graph (FG) based graphical model with {\em Gaussian approximation of interference} (GAI). The per-symbol complexities are $O(K^2n_t^2)$ and $O(Kn_t)$ for the MRF and the FG with GAI approaches, respectively, where $K$ and $n_t$ denote the number of channel uses per frame, and number of transmit antennas, respectively. These low-complexities are quite attractive for large dimensions, i.e., for large $Kn_t$. From a performance perspective, these algorithms are even more interesting in large-dimensions since they achieve increasingly closer to optimum detection performance for increasing $Kn_t$. Also, we show that these message passing algorithms can be used in an iterative manner with local neighborhood search algorithms to improve the reliability/performance of $M$-QAM symbol detection.

preprint2010arXiv

A Hybrid RTS-BP Algorithm for Improved Detection of Large-MIMO M-QAM Signals

Low-complexity near-optimal detection of large-MIMO signals has attracted recent research. Recently, we proposed a local neighborhood search algorithm, namely `reactive tabu search' (RTS) algorithm, as well as a factor-graph based `belief propagation' (BP) algorithm for low-complexity large-MIMO detection. The motivation for the present work arises from the following two observations on the above two algorithms: $i)$ RTS works for general M-QAM. Although RTS was shown to achieve close to optimal performance for 4-QAM in large dimensions, significant performance improvement was still possible for higher-order QAM (e.g., 16- and 64-QAM). ii) BP also was shown to achieve near-optimal performance for large dimensions, but only for $\{\pm 1\}$ alphabet. In this paper, we improve the large-MIMO detection performance of higher-order QAM signals by using a hybrid algorithm that employs RTS and BP. In particular, motivated by the observation that when a detection error occurs at the RTS output, the least significant bits (LSB) of the symbols are mostly in error, we propose to first reconstruct and cancel the interference due to bits other than LSBs at the RTS output and feed the interference cancelled received signal to the BP algorithm to improve the reliability of the LSBs. The output of the BP is then fed back to RTS for the next iteration. Our simulation results show that in a 32 x 32 V-BLAST system, the proposed RTS-BP algorithm performs better than RTS by about 3.5 dB at $10^{-3}$ uncoded BER and by about 2.5 dB at $3\times 10^{-4}$ rate-3/4 turbo coded BER with 64-QAM at the same order of complexity as RTS. We also illustrate the performance of large-MIMO detection in frequency-selective fading channels.

preprint2009arXiv

High-Rate Space-Time Coded Large MIMO Systems: Low-Complexity Detection and Channel Estimation

In this paper, we present a low-complexity algorithm for detection in high-rate, non-orthogonal space-time block coded (STBC) large-MIMO systems that achieve high spectral efficiencies of the order of tens of bps/Hz. We also present a training-based iterative detection/channel estimation scheme for such large STBC MIMO systems. Our simulation results show that excellent bit error rate and nearness-to-capacity performance are achieved by the proposed multistage likelihood ascent search (M-LAS) detector in conjunction with the proposed iterative detection/channel estimation scheme at low complexities. The fact that we could show such good results for large STBCs like 16x16 and 32x32 STBCs from Cyclic Division Algebras (CDA) operating at spectral efficiencies in excess of 20 bps/Hz (even after accounting for the overheads meant for pilot based training for channel estimation and turbo coding) establishes the effectiveness of the proposed detector and channel estimator. We decode perfect codes of large dimensions using the proposed detector. With the feasibility of such a low-complexity detection/channel estimation scheme, large-MIMO systems with tens of antennas operating at several tens of bps/Hz spectral efficiencies can become practical, enabling interesting high data rate wireless applications.

preprint2009arXiv

Robust THP Transceiver Designs for Multiuser MIMO Downlink with Imperfect CSIT

In this paper, we present robust joint non-linear transceiver designs for multiuser multiple-input multiple-output (MIMO) downlink in the presence of imperfections in the channel state information at the transmitter (CSIT). The base station (BS) is equipped with multiple transmit antennas, and each user terminal is equipped with one or more receive antennas. The BS employs Tomlinson-Harashima precoding (THP) for inter-user interference pre-cancellation at the transmitter. We consider robust transceiver designs that jointly optimize the transmit THP filters and receive filter for two models of CSIT errors. The first model is a stochastic error (SE) model, where the CSIT error is Gaussian-distributed. This model is applicable when the CSIT error is dominated by channel estimation error. In this case, the proposed robust transceiver design seeks to minimize a stochastic function of the sum mean square error (SMSE) under a constraint on the total BS transmit power. We propose an iterative algorithm to solve this problem. The other model we consider is a norm-bounded error (NBE) model, where the CSIT error can be specified by an uncertainty set. This model is applicable when the CSIT error is dominated by quantization errors. In this case, we consider a worst-case design. For this model, we consider robust i) minimum SMSE, ii) MSE-constrained, and iii) MSE-balancing transceiver designs. We propose iterative algorithms to solve these problems, wherein each iteration involves a pair of semi-definite programs (SDP). Further, we consider an extension of the proposed algorithm to the case with per-antenna power constraints.